Urgent Electronic Components in Indonesia: 58 Walsin MLCC Lines at 1 uF or More, 45 on Our Hong Kong Shelf, When a Line Runs Short

The MLCC that stops an Indonesian SMT line is usually a high-capacitance one, so urgent electronic components start there. Our stock snapshot dated 9 November 2026 holds 58 Walsin MLCC lines at 1 uF or more, 45 on our own Hong Kong shelf, from 1 uF to 100 uF. Venatech is the authorised Walsin distributor in Hong Kong.

---

Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for the buyer, planner or production engineer at an Indonesian factory, whether in Batam, Bekasi, Karawang or Surabaya, who has a line waiting on a capacitor. Walsin Technology (Walsin) is the line we are authorised for. Through our supplier network in Hong Kong we source parts from most passive-component brands on request, including urgent spot buys when a line is short of parts; Walsin comes through our authorised channel. We counted every figure below ourselves on 13 November 2026, from our stock snapshot dated 9 November 2026 and our Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx.

What did the October 2026 PMI say about Indonesian factory demand?

Demand jumped. Trading Economics reported on 2 November 2026 that the S&P Global Indonesia Manufacturing PMI rose to 54.0 in October 2026 from 52.4, a 31-month high, with new orders growing at the fastest pace since October 2021 and export orders at the fastest since the survey began in April 2011.

The same report says firms bought more inputs and built pre-production stocks sharply, and that supplier delivery times shortened for the first time in over a year. Those are survey findings, not ours. A sudden lift in orders is when a planner finds that one BOM line was sized for the old forecast, and the line that runs dry first is often a 10 uF or 22 uF decoupling capacitor, because every regulator on the board carries several.

What happens in the first hours when an Indonesian SMT line runs short of an MLCC?

The cost is the line, not the part. A ceramic capacitor costs very little, but a missing reel stops every board that carries it, so the useful questions in the first hours are which stock can ship now, from which source, with which date code, and whether a cross needs an engineer’s signature.

Hours	Question	Who answers	What we need from you
0 to 1	Exactly which part and how many	Your planner	Part number, brand, quantity, need-by date
1 to 2	Is it on a shelf now	Venatech	Delivery point in Indonesia
1 to 2	Can the original brand be found	Venatech, through our network	Approved alternates, date-code limit
2 onward	Is a Walsin cross acceptable	Your engineer	Working voltage and the datasheet limits that matter

We confirm availability, date code and lead time on each quote. We give no stock, price or delivery guarantee and use no urgency tricks.

Which Walsin MLCC at 1 uF or more sit in our Hong Kong stock?

58 lines, 45 on our own shelf. We counted 58 Walsin MLCC part numbers at 1 uF or more in our stock snapshot dated 9 November 2026, from 0201 to 1210: 34 X5R, 23 X7R and 1 X6S; 45 sit on our own Hong Kong shelf and the rest are network stock we can access, including 18 shelf lines at 10 uF or more.

Capacitance rung	Lines we hold or can access	On our own shelf	Example shelf part
1 uF	17	13	0603B105K250, 25 V, X7R, 0603
1.5 uF to 3.3 uF	11	6	0805B225K250, 2.2 uF, 25 V, X7R, 0805
4.7 uF	10	8	1206B475K500, 50 V, X7R, 1206
10 uF	12	11	0805X106K250, 25 V, X5R, 0805
22 uF	5	4	1206X226K250, 25 V, X5R, 1206
47 uF	2	2	0805X476M6R3, 6.3 V, X5R, 0805
100 uF	1	1	1210X107M6R3, 6.3 V, X5R, 1210
Total	58	45

The whole snapshot holds 1,174 Walsin part numbers. The ready stock page shows the shelf as a dated snapshot, not live-synced.

Which line-down briefs land on a shelf part, and which do not?

Seven of eight common briefs land on our own shelf. We checked eight high-capacitance briefs that Indonesian power, appliance and consumer boards commonly carry against our own shelf in the 9 November 2026 snapshot: seven match a Walsin part that sits there now, and one, 10 uF at 16 V in X7R 0805, goes to quote.

Short line (your BOM)	Walsin shelf part	Our export says	Match / mismatch
10 uF, 10 V, X5R, 0603	0603X106K100	10 percent, 0.80 mm	Match
10 uF, 25 V, X5R, 0805	0805X106K250	10 percent, 1.25 mm	Match
10 uF, 25 V, X7R, 1210	1210B106K250	10 percent, 2.00 mm	Match
22 uF, 25 V, X5R, 1206	1206X226K250	10 percent	Match
47 uF, 6.3 V, X5R, 0805	0805X476M6R3	20 percent	Match if your BOM allows 20 percent
4.7 uF, 50 V, X7R, 1206	1206B475K500	10 percent	Match
1 uF, 25 V, X7R, 0603	0603B105K250	10 percent	Match
10 uF, 16 V, X7R, 0805	0805B106K100 is 10 V; 0805X106K160 is X5R		Mismatch on voltage or dielectric; request a quote

A higher voltage rating at the same size, dielectric and capacitance is usually acceptable, but a lower one never is. Check each part against Walsin’s datasheet, WTC_MLCC_General_Purpose.pdf, before release.

What should an engineer check before releasing a high-capacitance cross?

Voltage, dielectric, thickness and DC bias. A high-capacitance MLCC cross must match or exceed the rated voltage, keep the dielectric class, fit the height limit and hold enough capacitance at the working voltage, because class II ceramics lose capacitance under DC bias and the loss differs between makers.

Compare the incumbent’s and Walsin’s datasheet bias curves at your rail voltage, not just the nominal value; a 10 uF part on a 5 V rail may deliver well under 10 uF, and the two makers’ parts will not lose the same amount. If a deviation is acceptable, your quality team signs it; we never treat a cross as a silent swap. Our posts on building a BOM that survives a shortage and crossing a whole BOM show how to make the next line-down shorter.

How can Venatech help with urgent electronic components in Indonesia?

How Venatech helps: shelf, network and cross on one quote. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes 18 manufacturers’ part numbers and crosses 800,000+ parts to Walsin, and we quote our shelf, network stock and spot buys of other brands from Hong Kong in small lots.

• Send the short line through the request-a-quote form on our site, or upload the list on the BOM page.
• Paste a Murata, Samsung, TDK, Taiyo Yuden or Yageo code into the cross-reference tool to see the Walsin match, or ask us to source the original through our network.
• Browse every Walsin family in the MLCC range. Walsin is the line we are authorised for; other brands we source, never as an authorised or franchised distributor.

The short version

• Indonesia’s manufacturing PMI hit 54.0 in October 2026, with new orders growing at the fastest pace since October 2021 (Trading Economics, 2 November 2026).
• Our 9 November 2026 snapshot holds 58 Walsin MLCC lines at 1 uF or more, 45 on our own Hong Kong shelf.
• 18 shelf lines sit at 10 uF or more, up to 100 uF in 1210.
• Match voltage, dielectric, thickness and DC bias; a deviation is your quality team’s decision.

Send us the capacitor that is holding your line, with quantity, need-by date and delivery point, and we will tell you what ships from our shelf and what our network can find. Which decoupling value on your board has the fewest sources?

Related reading

• Building a BOM that survives a shortage
• Crossing a whole BOM: paste the list, get an RFQ
• Buffer stock: protecting a BOM line through constraint
• Free cross-reference tool and ready stock snapshot

Last reviewed 13 Nov 2026.

Sources

Fetched 13 November 2026.

• Trading Economics, Indonesia Manufacturing Growth Hits 31-Month High, 2 November 2026, reporting the S&P Global Indonesia Manufacturing PMI: https://tradingeconomics.com/indonesia/manufacturing-pmi/news/597037
• Venatech Walsin MLCC export (Venatech_MLCC_Upload_01.xlsx to _08.xlsx) and Venatech stock snapshot dated 9 November 2026, re-measured 13 November 2026.
• Walsin datasheet WTC_MLCC_General_Purpose.pdf, as linked in the export.

---

Frequently asked questions

---