NEWS

Current Sense Resistor Supply for India’s Hosur Electric Two-Wheeler Plants: 11,616 Walsin Shunts From the Authorised Distributor in Hong Kong

A current sense resistor tells the battery management system and the motor controller how many amps are flowing. We counted 11,616 Walsin current sense resistors, 5,799 of them tagged AEC-Q200, and a 5 milliohm 2512 brief returns 34 parts. Venatech is the authorised Walsin distributor in Hong Kong, serving Hosur, India.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for BMS, charger and motor-controller engineers and buyers at electric two-wheeler makers and their suppliers in Hosur, Tamil Nadu, and across south India. Walsin Technology (Walsin) is the line we are authorised for. We filtered our chip-resistor upload files, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx (234,378 distinct part numbers), to the two low-ohm current-sense series groups on 16 November 2026, and checked the result against our ready stock snapshot dated 9 November 2026. Every part number below is real.

What is being built for electric two-wheelers in Hosur?

Another e-scooter and e-motorcycle plant. Electrive reported on 16 September 2026 that Ultraviolette Automotive will build a plant in Hosur, Tamil Nadu, with 250,000 units a year of capacity reached in phases and room to double to 500,000, for an investment of 7.79 billion rupees.

The report puts the site near the plants of TVS Motor Company and Ather Energy and names the Tesseract scooter among the first models. Those are the publication’s figures, not ours, and we make no claim about whose parts any of these makers use. What it tells a design team is that the Hosur corridor keeps adding electric two-wheeler volume, and every one of those vehicles carries current sense resistors: in the battery pack’s BMS, in the motor controller’s phase or DC-link sensing, and in the on-board or off-board charger. Each shunt sets the accuracy of state-of-charge estimates and the speed of over-current protection.

How many current sense resistors does Walsin list?

11,616. We counted 11,616 Walsin current sense resistors: 10,428 thick-film parts from 5 milliohm to just under 1 ohm, and 1,188 metal plate and metal foil parts from 0.5 milliohm to 0.7 ohm, rated up to 3 W.

Current sense group Parts Resistance span Highest rating
Thick film, standard and power 4,791 5 mOhm to 0.976 Ohm 3 W
Thick film, automotive 5,381 20 mOhm to 0.976 Ohm 2 W
Thick film, reverse geometry 256 10 mOhm to 100 mOhm 0.5 W
Metal plate and metal foil 770 0.5 mOhm to 0.7 Ohm 3 W
Metal plate, automotive 418 0.5 mOhm to 100 mOhm 3 W

Of the 11,616, 5,799 carry an AEC-Q200 tag in the export, and 672 sit at 10 milliohm or below, 638 of those in metal. The metal parts cluster in 2512, with 625, and 1206, with 375. For a BMS shunt at a few milliohms, the metal plate families are where to look first. We have not seen this split counted anywhere else.

Which Walsin part crosses a 5 milliohm, 2512 current sense resistor?

Thirty-four parts. At 5 milliohm in 2512 we found 34 Walsin part numbers in nine metal plate and metal foil families, rated from 1 W to 3 W; 18 are at 1 percent and 16 carry an AEC-Q200 tag.

Brief: 5 mOhm, 1 percent, 2512 Walsin part Rating TCR Match / mismatch Your incumbent
Highest rating WW25AR005FTL 3 W 70 ppm Match
Highest rating, automotive WW25AR005FTLJ 3 W 70 ppm Match, adds AEC-Q200
2 W, low TCR, automotive WW25NR005FTLJ 2 W 50 ppm Match, adds AEC-Q200
1 W, low TCR, automotive WW25MR005FTLJ 1 W 50 ppm Match if your dissipation fits 1 W
1 W, automotive WW25JR005FTLJ 1 W 70 ppm Match if your dissipation fits 1 W
Metal foil WW25DR005FTL 2 W 100 ppm Match on value; higher TCR
Looser tolerance WW25AR005JTL 3 W 70 ppm Mismatch in tolerance (5 percent)

Write your current part in the last column and check the pad layout too: a four-terminal Kelvin footprint and a two-terminal one are not interchangeable. Walsin’s datasheets ASC_WW25A.pdf and ASC_WW25N_J_AUTO.pdf, linked in our export, give the land pattern. Our post on thick film versus metal low-ohm current sense explains the trade.

How much current can a 5 milliohm 2512 shunt carry?

About 24 A at 3 W, by Ohm’s law. For a 5 milliohm shunt, current equals the square root of power over resistance, so a 3 W rating allows about 24.5 A, a 2 W rating about 20 A and a 1 W rating about 14 A, before any derating.

Rating at 5 mOhm Implied current Example Walsin part
3 W about 24.5 A WW25AR005FTLJ
2 W 20 A WW25NR005FTLJ
1 W about 14 A WW25MR005FTLJ

A two-wheeler pack can see peak currents well above its continuous rating during hard acceleration, so check the pulse rating, not only the continuous one, and derate for board temperature. TCR matters too: a 50 ppm part drifts less as the shunt heats, which keeps the coulomb count honest. Our posts on current sense resistor TCR and the 1 milliohm current sense resistor go further.

Which Walsin current sense resistors are on the Hong Kong shelf?

Three lines. We checked all 11,616 parts against our ready stock snapshot dated 9 November 2026: three thick-film 0805 lines at 1 percent and 1/4 W are on our shelf in Hong Kong (snapshot 9 Nov 2026).

They are WW08WR270FTL at 0.27 Ohm, WW08WR390FTL at 0.39 Ohm and WW08WR470FTL at 0.47 Ohm, which suit low-current sensing in chargers, DC-DC stages and accessory supplies. Milliohm BMS shunts are quoted to order: request a quote and we source them through our authorised Walsin channel. The ready stock list is a dated snapshot held in Hong Kong, and the chip resistor range page shows every series. We confirm availability, date code and lead time on each quote.

How Venatech helps: how does a Hosur EV team cross its shunt resistors?

How Venatech helps: one upload for pack, controller and charger. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, including the 11,616 current sense resistors in this post.

Paste an incumbent shunt into the free cross-reference tool, or upload the BOM at /bom/ and request a quote through the site. We serve India from Hong Kong in small lots, which suits prototype and pilot builds as new capacity ramps, and we quote fast. Qualification stays with you.

The short version

  • Ultraviolette is building a 250,000-unit-a-year electric two-wheeler plant in Hosur for 7.79 billion rupees (Electrive, 16 September 2026).
  • Walsin lists 11,616 current sense resistors: 10,428 thick film and 1,188 metal, 5,799 tagged AEC-Q200.
  • A 5 milliohm 2512 brief returns 34 Walsin parts, rated 1 W to 3 W.
  • Three 0805 current sense lines are on our Hong Kong shelf snapshot dated 9 November 2026.

Send us the shunt lines from your Hosur pack, controller or charger and we will return the Walsin crosses with every difference stated. What peak current does your shunt need to survive?

Related reading

Last reviewed: 16 November 2026.

Sources

Fetched 16 November 2026.

  • Electrive, India: Ultraviolette Automotive to set up new 250,000-unit e-2W plant, 16 September 2026: https://www.electrive.com/2026/09/16/india-ultraviolette-automotive-to-set-up-new-250000-unit-e-2w-plant/
  • Venatech chip-resistor upload files Venatech_ChipR_Upload_01.xlsx to _79.xlsx and ready stock snapshot dated 9 November 2026, re-measured 16 November 2026.

Frequently asked questions

How many current sense resistors does Walsin make?

11,616 in our count of 16 November 2026: 10,428 thick film and 1,188 metal plate or metal foil, from 0.5 milliohm to just under 1 ohm.

Which Walsin part crosses a 5 milliohm 2512 shunt resistor?

WW25AR005FTL at 3 W, or WW25AR005FTLJ with AEC-Q200; WW25NR005FTLJ at 2 W and 50 ppm. Confirm the footprint, pulse rating and TCR against both datasheets.

Does Walsin make an AEC-Q200 current sense resistor?

Yes. 5,799 of the 11,616 carry an AEC-Q200 tag in our export, including 418 metal plate automotive parts.

What is the lowest-value current sense resistor from Walsin?

0.5 milliohm, in the metal plate and metal foil families. We counted 672 parts at 10 milliohm or below.

Does Venatech stock current sense resistors in Hong Kong?

Three Walsin 0805 lines, WW08WR270FTL, WW08WR390FTL and WW08WR470FTL, are on our ready stock snapshot dated 9 November 2026. Stock moves; other lines are sourced on request.

Can Venatech supply EV makers in Hosur, India?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to India. Use the free cross-reference tool or upload a BOM; confirm import rules with your compliance team.


Share This, Choose Your Platform!