NEWS

High Voltage Chip Resistor for Electrical Equipment in Mexico: WEG Plans 250 Million US Dollars in Hidalgo, and Walsin Lists 3,004 UL-Series High-Voltage Parts

A high voltage chip resistor for Mexican drive, switchgear or data-centre power boards is a deep Walsin Technology (Walsin) range: 20,244 part numbers, 3,004 of them in Walsin’s UL Safety Certification series, and a 470 kilohm, 1206 divider brief returns 12. Venatech, Walsin’s authorised distributor in Hong Kong, crosses and quotes them.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for an engineer in Mexico who designs or buys the control and sensing electronics inside motors, drives, switchgear and power-distribution equipment. We parsed the 14 files of Walsin’s thick-film high-voltage chip resistor export, from Thick_Film_High_Voltage_Chip_Resistor_0_05.xlsx to Thick_Film_High_Voltage_Chip_Resistor_Jumper.xlsx, and we counted distinct part numbers in each. The news fact names its source and date; we fetched it on 16 November 2026.

What did WEG announce in Hidalgo, Mexico?

An investment of 250 million US dollars. El Imparcial reported on 12 November 2026 that Brazilian electrical-equipment maker WEG will invest 250 million US dollars in Hidalgo, Mexico, between 2027 and 2030, to make equipment for data centres, AI systems and power distribution networks, with about 2,000 direct and 4,000 indirect jobs.

The announcement was made at the president’s morning press conference, alongside the Economy Secretary and a WEG vice president, and is tied to Plan Mexico. The report does not give a construction start or name a city in Hidalgo, and we add no forecast. For an engineer in Mexico, the signal is that more heavy electrical equipment for data centres will be built in the country, and that equipment carries control boards that sense mains and DC-bus voltages directly.

Why does electrical equipment need a high voltage chip resistor?

Because a normal chip resistor is limited by voltage before it is limited by power. A high voltage chip resistor is built to hold a higher working voltage across one body than a general-purpose part of the same size, so a divider that senses a 480 V three-phase line or a 700 V DC bus needs fewer parts in series and less board area.

In a variable-frequency drive, a UPS, a switchgear controller or a transformer monitor, the microcontroller must read the line or bus voltage. The usual circuit is a long resistor string feeding a small sense resistor. Each part in the string sees a share of the total voltage; if that share exceeds the part’s maximum working voltage, the part can arc across its surface or drift. Bleeder resistors across DC-link capacitors and pre-charge sensing paths have the same limit. Our note on high-voltage chip resistors and the limit nobody checks covers how the voltage limit and the power limit interact.

How many high voltage chip resistors does Walsin list?

20,244 part numbers. We counted 20,244 distinct thick-film high-voltage chip resistor part numbers in Walsin’s export: 10,437 standard, 6,803 automotive, 1,502 in the UL Safety Certification series and 1,502 in its automotive version, across five sizes from 0603 to 2512.

Walsin high-voltage chip resistor series Part numbers
Thick Film High Voltage Chip Resistor 10,437
Thick Film High Voltage Chip Resistor (Automotive) 6,803
UL Safety Certification series 1,502
UL Safety Certification series (Automotive) 1,502
Total 20,244

The five sizes are 0603, 0805, 1206, 2010 and 2512, and resistance runs from 47 ohm to 100 megohm, with 5,114 parts at 1 megohm or more. The UL-series name is Walsin’s; for a safety-relevant divider, ask for the UL file and the datasheet for the exact part number. The chip resistor range lists every Walsin family.

Which Walsin parts fit a 470 kilohm, 1206 divider brief?

Twelve in 1206. We filtered the export to 470 kilohm and found 60 part numbers across the five sizes, 12 of them in 1206; for a 1 percent, 1206 divider brief that calls for a UL-series part, two match: WF12N4703FTL and its automotive version WF12N4703FTLJ.

All twelve are rated 1/4 W at 1206 in the export. The table shows how they line up. Put your incumbent in the last column.

Walsin part Series Tolerance TCR (ppm/°C) Match / mismatch with a 470 kilohm, 1%, 1206, UL-series brief Your incumbent
WF12N4703FTL UL Safety Certification 1% ≤±100 Match
WF12N4703FTLJ UL Safety Certification, automotive 1% ≤±100 Match, automotive version
WK12V4703FTL High voltage 1% ≤±100 Mismatch: not the UL series
WK12V4703FTLJ High voltage, automotive 1% ≤±100 Mismatch: not the UL series
WF12V4703FTL High voltage 1% ≤±100 Mismatch: not the UL series
WK12V4703DTL High voltage 0.5% ≤±100 Mismatch: not UL, tighter tolerance
WK12V4703GTLJ High voltage, automotive 2% ≤±100 Mismatch: wider tolerance
WF12N474 JTL UL Safety Certification 5% ≤±200 Mismatch: 5%, higher TCR

If your brief does not require the UL series, WK12V4703FTL and WF12V4703FTL are straight 1 percent fits. Note that some Walsin 5 percent codes contain a space, such as WK12V474 JTL; paste them with the space, or VenaMatch will find them for you. Confirm against both datasheets and qualify in your own circuit.

How many resistors does a 480 V divider string need?

It depends on the datasheet working voltage, not on the export. The export lists resistance, tolerance, TCR and rated power for all 20,244 parts but no working-voltage column, so the number of 1206 parts in a 480 V divider must be set from Walsin’s datasheet limit per size, with margin for line transients.

Work it this way. Take the peak line-to-line voltage on a 480 V system, about 680 V, add the transient level your equipment standard requires, and divide by the datasheet maximum working voltage for the chosen size with a derating factor your team accepts. Round up, then check that the string’s total dissipation, spread across the parts, sits well below each part’s rated power; our guide to chip resistor power rating by case size has the numbers per size. Finally, keep creepage between pads and between adjacent parts in line with the insulation class of the product. If the board will see automotive-grade stress, what AEC-Q200 actually certifies explains what the automotive versions do and do not promise.

How does a Mexican team get these parts?

Through a quote from Hong Kong. The 470 kilohm parts in the table are to order: request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote; our stock snapshot as at 9 November 2026 is on the ready-stock page.

The ready-stock list is a dated snapshot, never live-synced. We make no stock, price or lead-time promise. For a pilot build, we can quote small lots, so a design team can qualify the part before production volumes are fixed.

How Venatech helps

How Venatech helps an equipment maker in Mexico is a high voltage chip resistor cross that shows every field. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, stating where the Walsin part differs from your original.

Paste your divider and bleeder resistor codes into the cross-reference tool, or upload a full BOM and request a quote through the site. See the ready-stock snapshot, dated 9 November 2026. We serve Mexican teams from Hong Kong, in small lots with fast quotes. Walsin is the line we are authorised for; Stackpole and Viking are lines we supply. We give no customs, USMCA or safety-approval advice; confirm that with your own compliance team.

The short version

El Imparcial reported on 12 November 2026 that WEG will invest 250 million US dollars in Hidalgo from 2027 to 2030 to build equipment for data centres and power networks. That equipment senses high voltages on its control boards. Walsin covers the high voltage chip resistor brief with 20,244 parts, 3,004 in its UL series, and a 470 kilohm, 1 percent, 1206 UL-series brief returns two exact fits.

Send us your divider string, and we will return Walsin crosses with every difference stated. How many resistors does your 480 V sense string use today?

Related reading

Last reviewed: 16 November 2026

Sources

Fetched 16 November 2026.

  • El Imparcial, report on WEG’s 250 million US dollar investment in Hidalgo, 12 November 2026: https://www.elimparcial.com/dinero/2026/11/12/empresa-brasilena-weg-invertira-250-millones-de-dolares-en-mexico-para-fabricar-equipos-destinados-a-centros-de-datos-e-inteligencia-artificial-y-crear-6-mil-empleos-entre-2027-y-2030/
  • Walsin high-voltage chip resistor export, 14 files Thick_Film_High_Voltage_Chip_Resistor_*.xlsx, re-measured 16 November 2026; Venatech stock snapshot as at 9 November 2026.

Frequently asked questions

What did WEG announce for Mexico in November 2026?

El Imparcial reported on 12 November 2026 that WEG will invest 250 million US dollars in Hidalgo, Mexico, from 2027 to 2030, to make equipment for data centres, AI systems and power networks, with about 2,000 direct jobs.

What is a high voltage chip resistor?

It is a chip resistor built to hold a higher working voltage across one body than a general-purpose part of the same size. It is used in voltage dividers, bleeders and sensing strings on mains and DC-bus circuits.

How many high voltage chip resistors does Walsin offer for equipment makers in Mexico?

We counted 20,244 part numbers in Walsin’s export, 3,004 of them in the UL Safety Certification series and its automotive version. Venatech crosses and quotes them from Hong Kong for teams in Mexico.

Which Walsin part fits a 470 kilohm 1% 1206 high voltage resistor?

WF12N4703FTL in the UL series, or WF12N4703FTLJ for the automotive version. Without the UL requirement, WK12V4703FTL and WF12V4703FTL also fit. Confirm against both datasheets.

Does the Walsin export give a working voltage for each part?

No. The export gives resistance, tolerance, TCR and rated power. Take the maximum working voltage per size from Walsin’s high-voltage datasheet before you size a divider string.

Is Venatech an authorised Walsin distributor?

Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong and serves teams in Mexico in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!