A current sense resistor in an EV charger turns load current into a few millivolts the controller can trust. Spain now has 2,806 public points above 250 kW, and Walsin lists 848 metal plate shunts from 0.5 to 100 milliohm in 1206 to 2512, across the Stackpole CSNL range. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for hardware engineers and buyers at Spanish makers of AC wallboxes, DC fast chargers and charge-point power modules. Walsin Technology (Walsin) is the line we are authorised for; Stackpole Electronics (SEI) is a line we supply, so a CSNL already on your parts list can be quoted as it is or crossed to Walsin. We counted every Walsin figure below on 17 November 2026 in our Walsin metal low-ohm current sense export, the Metal_Low_Ohm_Current_Sense_Chip_Resistor__1of1.xlsx file, and checked our ready stock snapshot as at 9 November 2026. Stackpole figures come only from Stackpole’s current sensing product page on seielect.com, fetched the same day; the CSNL datasheet itself did not load for us that day, so confirm each Stackpole figure against it.
How fast is Spain’s public EV charging network growing?
By about 1,600 points a quarter, with the fastest tier growing fastest. Interempresas reported on 22 July 2026, from the ANFAC Electromobility Barometer for the second quarter of 2026, that Spain had 56,682 public charging points, 1,605 more than the quarter before, and 2,806 points above 250 kW, about five percent of the operating network.
The same report counted 17,821 installed points not yet operating at the end of the quarter, and put points up to 22 kW at close to 70 percent of the network. Motor.es reported on 13 January 2026, from the same ANFAC barometer, that Spain added 14,346 public points in 2025 and registered 101,627 battery electric cars that year. Those are ANFAC’s figures as reported, not ours. Every one of those points measures its own current, most of them with a low-ohm shunt.
Where does a current sense resistor sit in an EV charger?
In every path where the controller needs to know the current. A current sense resistor for an EV charger sits in the AC output of a wallbox for metering and overcurrent trip, in the DC link and output stage of a fast charger, and in the auxiliary supplies and fan drives that keep a cabinet running.
The arithmetic sets the value. A single-phase 7.4 kW wallbox carries 32 A at 230 V. A 1 milliohm shunt at 32 A drops 32 mV and dissipates about 1.0 W, which a 3 W 2512 metal plate part handles with margin. A 5 milliohm shunt at the same current would dissipate about 5.1 W, far beyond any 2512 chip. High-current paths push the value down, where metal plate and metal alloy parts beat thick film on resistance, TCR and drift with self-heating. Our low-ohm current sense: thick film vs metal note sets out the trade.
How many Walsin metal plate shunts cover the Stackpole CSNL range?
- We filtered Walsin’s four metal plate current sense series to 1206, 2010 and 2512 at 100 milliohm or below and counted 848 distinct part numbers, from 0.5 milliohm upward; 173 of them are at 1 percent and 50 ppm, and 156 are 2512 parts rated 3 W.
| Walsin metal plate subset (1206 to 2512) | Distinct parts | What the export states |
|---|---|---|
| All metal plate series, 100 milliohm or below | 848 | 0.5 to 100 milliohm, 1/2 W to 3 W |
| At 1 percent and 50 ppm | 173 | Same tolerance and TCR as a CSNL brief |
| 2512 rated 3 W | 156 | Highest power in this window |
| Labelled automotive by Walsin | 418 | Ask for the qualification report |
Stackpole’s current sensing page, fetched 17 November 2026, describes CSNL as a metal alloy current sensing chip resistor from 1206 to 2512, up to 3 W, at 1 or 5 percent, from 0.2 to 100 milliohm, at 50 ppm, with low inductance, and lists CSNL2512 as AEC-Q200. We have not seen this metal plate window counted elsewhere.
Which Walsin parts cross a Stackpole CSNL?
Most of the CSNL span, from 0.5 milliohm upward. For a CSNL-style brief in 1206 or 2512 between 0.5 and 100 milliohm, Walsin has a metal plate part at the same size and value; the differences sit in TCR on the lowest values and in power on some 2512 steps.
| Your brief (CSNL style) | Walsin part | Walsin size, power, tolerance, TCR (export) | Match / mismatch | Your incumbent |
|---|---|---|---|---|
| 0.2 milliohm, 2512 | WW25AR0L5FTL (0.5 milliohm) |
2512, 3 W, 1 percent, 70 ppm | Mismatch on value; keep the CSNL, which we can quote | |
| 1 milliohm, 2512, 3 W | WW25BR001FTL |
2512, 3 W, 1 percent, 70 ppm | Match on size, value, power; mismatch on TCR (70 vs 50 ppm) | |
| 5 milliohm, 2512, 50 ppm | WW25NR005FTL |
2512, 2 W, 1 percent, 50 ppm | Match on size, value, TCR; check power | |
| 10 milliohm, 1206, 50 ppm | WW12NR010FTL |
1206, 1 W, 1 percent, 50 ppm | Match on size, value, TCR | |
| 50 milliohm, 2512 | WW25NR050FTL |
2512, 2 W, 1 percent, 50 ppm | Match on size, value, TCR; check power | |
| 100 milliohm, 2512, 3 W | WW25AR100FTL |
2512, 3 W, 1 percent, 50 ppm | Match on size, value, power, TCR |
What should a Spanish charger maker check before switching?
Self-heating at your real current first, then TCR and layout. Calculate I squared R at your maximum continuous current, keep the shunt at or below about half its rated power in a sealed enclosure, then check that the TCR keeps your metering error inside budget across the cabinet’s temperature range.
A 70 ppm part that rises 60 degrees shifts about 0.4 percent; a 50 ppm part shifts about 0.3 percent. That may matter for an energy meter, rarely for an overcurrent trip. Footprints also differ between metal plate and metal alloy designs, so check the pad drawing in each datasheet before you reuse a layout. If your design calls for AEC-Q200 parts, ask for the qualification report on the automotive-labelled Walsin lines; Venatech makes no qualification claim of its own. Charger rules on metering and safety are set by your certifier; we give no compliance advice, so confirm with your compliance team. Our what resistor TCR actually buys you note covers the TCR maths.
How Venatech helps
Cross the whole charger board in one paste. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, stating size, value, tolerance, TCR and power as match or mismatch.
Paste your shunt lines into the cross-reference tool, or upload the parts list at BOM upload. On our shelf in Hong Kong (snapshot 9 Nov 2026) are three Walsin thick film current sense lines in 0805, WW08WR270FTL, WW08WR390FTL and WW08WR470FTL, at 0.27, 0.39 and 0.47 ohm, 1 percent, 1/4 W, suited to auxiliary and fan-drive sensing; see ready stock. The metal plate parts above are not on it, so request a quote and we source them through our authorised Walsin channel. Stackpole CSNL lines can be quoted too; Stackpole is a line we supply, and Walsin is the line we are authorised for. We serve Spanish buyers from Hong Kong in small lots and confirm availability, date code and lead time on each quote, with no price, lead-time or stock guarantee. The chip resistor range lists every Walsin family.
The short version
- Spain had 56,682 public charging points and 2,806 above 250 kW at the end of the second quarter of 2026, per ANFAC as reported by Interempresas on 22 July 2026.
- Walsin lists 848 metal plate shunts from 0.5 to 100 milliohm in 1206 to 2512; 173 are at 1 percent and 50 ppm.
- The Stackpole CSNL span has Walsin parts at the same size and value from 0.5 milliohm up; below that, keep the CSNL.
- Check self-heating at your real current, then TCR, footprint and the qualification report.
Send us the shunt lines from your wallbox or fast-charger power board, and we will return the Walsin crosses with every difference stated. What continuous current does your highest-rated shunt carry?
Related reading
- Low-ohm current sense: thick film vs metal
- What resistor TCR actually buys you
- Passive components for an EV on-board charger
- Cross-reference tool, BOM upload and ready stock snapshot
Last reviewed: 17 November 2026.
Sources
Fetched 17 November 2026.
- Interempresas, “La red pública de recarga alcanzó los 56.682 puntos operativos en España”, 22 July 2026: https://www.interempresas.net/MetalMecanica/659197-La-red-publica-de-recarga-alcanzo-los-56682-puntos-operativos-en-Espana.html
- Motor.es, report on ANFAC charging figures for 2025, 13 January 2026: https://www.motor.es/noticias/espana-puntos-recarga-2026112018.html
- Stackpole Electronics current sensing product page: https://seielect.com/products/ProductSearch.asp?keyWord=current+sensing
- Venatech Walsin metal low-ohm current sense export (Metal_Low_Ohm_Current_Sense_Chip_Resistor__1of1.xlsx) and ready stock snapshot dated 9 November 2026, re-measured 17 November 2026.
Frequently asked questions
What current sense resistor value suits a 32 A EV wallbox in Spain?
Around 1 milliohm is a common starting point: at 32 A it drops 32 mV and dissipates about 1.0 W, which a 3 W 2512 metal plate part such as WW25BR001FTL handles with margin. Confirm against your own amplifier gain and thermal budget.
How many Walsin metal plate shunts cross the Stackpole CSNL range?
848 in our export, from 0.5 to 100 milliohm in 1206, 2010 and 2512. 173 of them are at 1 percent and 50 ppm, matching a CSNL brief on tolerance and TCR.
Which Walsin part crosses a Stackpole CSNL at 10 milliohm in 1206?
WW12NR010FTL, a 1206, 10 milliohm, 1 percent, 50 ppm, 1 W metal plate part. Compare pad layout and power on both datasheets before you approve it.
Is there a Walsin metal plate shunt at 0.2 milliohm?
The lowest value in our metal plate export is 0.5 milliohm, for example WW25AR0L5FTL in 2512 at 3 W. If your design needs 0.2 milliohm, keep the Stackpole CSNL, which we can quote.
Do you hold current sense resistors in stock in Hong Kong?
Three Walsin thick film current sense lines in 0805 are on our shelf in Hong Kong (snapshot 9 Nov 2026): WW08WR270FTL, WW08WR390FTL and WW08WR470FTL. The metal plate parts are not; request a quote and we source them through our authorised Walsin channel.
Is Venatech authorised for Stackpole?
No. Venatech is the authorised Walsin distributor in Hong Kong; Stackpole is a line we supply, and we quote Stackpole CSNL lines alongside the Walsin cross.