The EU Machinery Regulation 2027 start is 20 January, when Regulation (EU) 2023/1230 applies to new machinery in Italy. For control boards in harsh plants, all 181 general-purpose resistor lines on our Hong Kong shelf have Walsin Technology (Walsin) anti-sulfur crosses, 1,001 in all. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for electronics and controls engineers, and the buyers who support them, at Italian machine-tool, packaging, ceramics and plastics machinery builders. It is perspective, not legal advice: which requirements apply to your machine, and how you show conformity, is for your compliance team. The regulation does not name a single component. What it does is raise the bar on how control systems and their safety-relevant data are protected and documented, which brings the reliability of the control boards themselves back into view. On 17 November 2026 we re-measured Walsin’s chip-resistor export (Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, 234,378 part numbers) against our ready-stock snapshot dated 9 November 2026.
What changes when the EU Machinery Regulation applies on 20 January 2027?
The legal basis for new machinery. Nemko wrote on 9 November 2026 that Regulation (EU) 2023/1230 applies from 20 January 2027, that machinery placed on the market before then must comply with Directive 2006/42/EC, and that the regulation addresses protection against accidental or intentional corruption of safety-relevant software and data.
Nemko lists further points a team should review: retaining evidence of interventions and software or configuration changes, the safety and reliability of control systems, and digital instructions that users can find, download and save, kept available online for the machine’s expected lifetime and at least 10 years after it is placed on the market. Paper copies requested at purchase, Nemko says, must be supplied free within one month. Nemko notes that the Machinery Regulation, the AI Act and the Cyber Resilience Act address different requirements, and that their relevance depends on the product. Exactly how these apply to your machine is a question for your compliance team.
Why does the EU Machinery Regulation 2027 matter to machine builders in Italy?
Because Italy’s machine orders are growing abroad. The Machine Maker reported on 28 October 2026 that UCIMU’s index of Italian machine-tool orders rose 10.5 % year on year in the third quarter of 2026, with foreign orders up 24.7 % and domestic orders down 7.1 %.
Machines built in Italy and shipped to other EU states after 20 January 2027 fall under the new regulation, and the same applies to machines for the Italian market. We make no claim about any builder’s designs or compliance plans. The practical point for an electronics team is that a machine designed now will be documented, supported and, under the regulation’s evidence requirements, scrutinised for years. Control boards that drift or fail early make that harder. Italian plants also run in atmospheres that are hard on electronics: rubber and tyre lines, ceramic kilns, paper mills and some plastics processes release sulfur compounds that attack the silver in ordinary thick-film resistors.
Where do chip resistors fit into control-system reliability?
In the failure mode nobody sees coming. A general-purpose thick-film chip resistor uses a silver-bearing inner electrode; in a sulfur-bearing atmosphere that electrode can convert to silver sulfide and open the resistor, which is why Walsin offers anti-sulfur series and why we counted 1,001 of them crossing our shelf lines.
The failure is slow and climate-dependent, so it rarely appears in a type test and often appears in the field, years in, on a machine in exactly the kind of plant Italian builders sell into. A pull-up that opens on a safety input, or a divider that drifts on a sensor line, is a control-system reliability problem even if no software was touched. Swapping to an anti-sulfur part with the same size, value and tolerance is one of the cheaper reliability steps in a control-board redesign, because the footprint does not change. Our guide to anti-sulfuration resistors explains the construction, and our count of anti-sulfuration chip resistors by value maps the whole range.
How many Walsin anti-sulfur resistors cross the general-purpose lines on our shelf?
All 181 lines have one. We checked every Walsin general-purpose resistor line on our shelf in Hong Kong in the snapshot dated 9 November 2026: all 181, every one at ±1 %, have at least one Walsin anti-sulfur part with the same size, value and tolerance, 1,001 distinct crosses in all.
| Size | Shelf lines, snapshot 9 Nov 2026 | Anti-sulfur series offering crosses | Datasheets named in the export |
|---|---|---|---|
| 0201 | 6 | General Purpose Anti-Sulfuration (Automotive) | ASC_WR02X_V.pdf |
| 0402 | 53 | General Purpose, High Grade and High Power anti-sulfur | ASC_WR_V.pdf, ASC_SR.pdf, ASC_SFxxP_TP.pdf |
| 0603 | 83 | General Purpose, High Grade and High Power anti-sulfur | ASC_WR_V.pdf, ASC_SR.pdf, ASC_WFxxP_V.pdf |
| 0805 | 26 | General Purpose, High Grade and High Power anti-sulfur | ASC_WR_Z.pdf, ASC_SR_W.pdf, ASC_SFxxP_TP.pdf |
| 1206 | 12 | General Purpose, High Grade and High Power anti-sulfur | ASC_WR_V.pdf, ASC_SR.pdf |
| 2512 | 1 | High Grade and High Power anti-sulfur | ASC_SR20-25X.pdf, ASC_SFxxP_TP.pdf |
| Total | 181 | 1,001 crosses: 360 General Purpose, 347 High Grade, 294 High Power |
121 of the 181 lines have six crosses each, and 50 have five. We have not seen this cut counted anywhere else. Browse the chip resistor range for the full anti-sulfur families, and take final ratings from each Walsin datasheet, not the export alone.
Which anti-sulfur cross should a machine-control board use?
The one that changes least. For a 10 kΩ ±1 % 0603 pull-up on a 24 V control input, Walsin offers six anti-sulfur crosses; two keep the 1/10 W rating and ≤±100 ppm/°C TCR of the shelf part exactly, and the high-power options raise the rating to 1/8 W.
| Shelf part, snapshot 9 Nov 2026 | Anti-sulfur cross | Series | TCR | Power | Match / mismatch for a drop-in swap on a machine-control board | Your incumbent |
|---|---|---|---|---|---|---|
WR06X1002FTL, 0603, 10 kΩ, ±1 % |
WR06X1002FTLV |
General Purpose Anti-Sulfuration (Automotive) | ≤±100 | 1/10 W | Match on every field shown | |
WR06X1002FTL |
SR06X1002FTL |
High Grade Anti-Sulfuration (Automotive) | ≤±100 | 1/10 W | Match, higher-grade sulfur resistance per its series | |
WR06X1002FTL |
SF06P1002FTP |
High Power (Anti-Sulfuration) | ≤±100 | 1/8 W | Mismatch on power, higher rating; check the BOM note | |
WR08X1002FTL, 0805, 10 kΩ, ±1 % |
WR08X1002FTLV |
General Purpose Anti-Sulfuration (Automotive) | ≤±100 | 1/8 W | Match on every field shown | |
WR08X1002FTL |
SR08X1002FTL |
High Grade Anti-Sulfuration (Automotive) | ≤±100 | 1/4 W | Mismatch on power, higher rating | |
WR04X1001FTL, 0402, 1 kΩ, ±1 % |
WR04X1001FTLV |
General Purpose Anti-Sulfuration (Automotive) | ≤±100 | 1/16 W | Match on every field shown |
A higher power rating is rarely a problem electrically, but it changes the part on your approved list, so treat it as a change, not a swap. The anti-sulfur crosses are to order: request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote. Put your incumbent in the last column, confirm against both datasheets, and qualify in your own circuit, ideally with a sulfur exposure test.
How Venatech helps
How Venatech helps is a whole-board anti-sulfur pass. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a control-board resistor list returns anti-sulfur candidates with series, TCR and power differences stated.
Paste your resistor part numbers into the cross-reference tool, or upload the control-board BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists the resistors and capacitors on our shelf in Hong Kong. We are Hong Kong-based and supply Lombardy, Emilia-Romagna, Piedmont and Veneto in small lots. Walsin is our authorised line; Stackpole and Viking are lines we supply. For anything about Machinery Regulation scope or conformity, confirm with your compliance team.
The short version
The EU Machinery Regulation 2027 start date is 20 January, when Regulation (EU) 2023/1230 applies, and Nemko lists control-system reliability and protection of safety-relevant software and data among the points to review. Italian machine-tool orders rose 10.5 % in the third quarter, UCIMU’s index shows. For control boards bound for sulfur-bearing plants, all 181 general-purpose resistor lines on our Hong Kong shelf have Walsin anti-sulfur crosses, 1,001 in all.
Send us the resistor list from your control board, and we will return Walsin anti-sulfur crosses with every difference stated. Which of your machines goes into a plant where you have seen a resistor open?
Related reading
- Anti-sulfuration resistors: SF thin film and SA arrays
- Anti-sulfuration chip resistors: 41,147 rows and 850 values
- Tolerance, TCR and dielectric codes decoded
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 17 November 2026
Sources
Fetched 17 November 2026.
- Nemko, “EU Machinery Regulation 2027: what your team must review”, 9 November 2026: https://digital.nemko.com/news/eu-machinery-regulation-2027-what-your-team-must-review
- The Machine Maker, “UCIMU Reports 10.5% Growth in Machine Tool Orders in Third Quarter of 2026”, 28 October 2026: https://themachinemaker.com/?p=114487
- Walsin chip-resistor export, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, re-measured 17 November 2026; datasheets as named in the export; Venatech ready-stock snapshot dated 9 November 2026.
Frequently asked questions
When does the EU Machinery Regulation apply in Italy?
Nemko says Regulation (EU) 2023/1230 applies from 20 January 2027 across the EU, including Italy; machinery placed on the market before then follows Directive 2006/42/EC. Confirm your position with your compliance team.
Does the EU Machinery Regulation 2027 set rules for electronic components?
We give no view on scope. Nemko highlights control-system safety and reliability and the protection of safety-relevant software and data; component choices sit inside those, so keep part numbers and date codes on file.
What is an anti-sulfur chip resistor?
It is a thick-film chip resistor built so its electrode resists attack by sulfur compounds, which can open ordinary silver-electrode resistors over time in rubber, ceramics, paper and some plastics plants.
How many Walsin anti-sulfur crosses exist for the resistors on Venatech’s shelf?
We counted 1,001 Walsin anti-sulfur parts crossing all 181 general-purpose resistor lines on our shelf in Hong Kong (snapshot 9 November 2026), matched on size, value and tolerance.
Is an anti-sulfur resistor a drop-in match for a general-purpose part?
Often, on size, value, tolerance and TCR, as with WR06X1002FTLV for WR06X1002FTL. Some crosses carry a higher power rating. Confirm both datasheets and qualify in your own circuit.
Is Venatech an authorised Walsin distributor for buyers in Italy?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Italy in small lots. Stackpole and Viking are lines we supply, not authorised lines.