For a high voltage MLCC in Korean semiconductor equipment, Walsin Technology (Walsin) lists 1,800 distinct parts rated 1 kV or more, from 0805 to 2225, and 61 of them are on our shelf in Hong Kong (snapshot 9 Nov 2026). Venatech, the authorised Walsin distributor in Hong Kong, crosses and quotes them.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for the engineers who build and supply the tools that sit inside Korean fabs: bias supplies, plasma and ion-source power, electrostatic chuck drivers, and the test rigs around them. The news hook is a test bed in Yongin that opens a commercial-grade cleanroom to small equipment and parts suppliers. We re-measured Walsin’s MLCC export (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_07.xlsx, 23,360 distinct part numbers) and our stock list as at 9 November 2026 on 16 November 2026. Every part number below is real.
What did SK hynix announce for Yongin on 16 November 2026?
A shared test fab. Korea JoongAng Daily reported on 16 November 2026 that SK hynix is building Trinity Fab, a 3,305-square-metre open test bed inside the first phase of its Y1 fab in Yongin, with a budget of 874.6 billion won shared with central and local government, and 51 tools installed.
The same report says the test bed is meant to let small suppliers of materials, parts and equipment evaluate products under conditions close to a commercial memory line, with full operation scheduled for the fourth quarter of 2027. The report says no supplier has been selected yet. We add no forecast and name no supplier. What matters for this post is simple: more Korean equipment and parts makers will be building tools and boards to be judged against a production line, and many of those boards carry high voltage.
Why does semiconductor equipment in South Korea need high voltage MLCC?
Because the tool runs on kilovolts. Plasma, ion-source, electrostatic chuck and high-voltage bias supplies routinely carry rails from several hundred volts to several kilovolts, and a high voltage MLCC is the compact part for snubbers, voltage multipliers, feedback dividers and filtering at those levels; Walsin’s middle and high voltage range runs from 200 V to 4 kV.
Three habits of high-voltage design decide which part you can use. First, case size scales with voltage, because creepage across the ceramic surface sets a floor: a 3 kV part will not fit in 0603. Second, Class II dielectrics such as X7R lose capacitance under DC bias, so a 10 nF X7R part at 1 kV delivers less than 10 nF on a 900 V rail; our note on MLCC DC bias and voltage derating explains the effect. Third, C0G/NP0 parts hold their value under bias and are the usual pick for dividers and resonant snubbers. Our pillar on middle and high voltage MLCC from 200 V to 4 kV walks the whole range, and the MLCC range lists every family.
How many high voltage MLCC does Walsin list at 1 kV or more?
1,800 part numbers. We counted 1,800 distinct Walsin MLCC part numbers rated 1 kV or more in the export: 752 at 1 kV, 62 between 1.25 kV and 1.5 kV, 450 at 2 kV, 23 at 2.5 kV and 513 at 3 kV and above, split 942 C0G/NP0 and 858 X7R.
| Case size | Walsin parts at 1 kV or more |
|---|---|
| 1206 | 463 |
| 1812 | 339 |
| 1808 | 328 |
| 1210 | 191 |
| 2220 | 144 |
| 0805 | 96 |
| 1825 | 84 |
| 2225 | 83 |
| 2211 | 57 |
| 1111 | 15 |
| Total | 1,800 |
Most of the 1,800 sit in Walsin’s middle and high voltage series (1,084 parts), with the rest spread across the big-size 1825, 2220 and 2225 series (251), the SH and SG soft-termination series (251), the X1/Y2 safety series (160), the AEC-Q200 MT and ST automotive series (36) and the microwave RF series (15).
Which Walsin parts cross a 10 nF, 1 kV, 1206 brief?
Five at 1 kV and two more at 1.5 kV. We filtered the export for 10 nF at 1 kV or more in 1206 and found seven parts: 1206B103J102, 1206B103K102, 1206B103M102, SH31B103K102 and SH31B103M102 at 1 kV, and 1206B103K152 and SH31B103K152 at 1.5 kV.
The table puts those against parts that cross on value but not on footprint. Fill the last column with your incumbent.
| Walsin part | Series | Case | Rated voltage | Tolerance | Thickness (mm) | Match / mismatch with a 10 nF, X7R, 1 kV, 1206 brief | Your incumbent |
|---|---|---|---|---|---|---|---|
1206B103K102 |
Middle and high voltage | 1206 | 1 kV | 10% | 1.25 | Match; on our shelf in Hong Kong (snapshot 9 Nov 2026) | |
1206B103J102 |
Middle and high voltage | 1206 | 1 kV | 5% | 1.25 | Match, tighter tolerance | |
SH31B103K102 |
SH soft termination | 1206 | 1 kV | 10% | 1.25 | Match, adds soft termination for flex-prone boards | |
1206B103K152 |
Middle and high voltage | 1206 | 1.5 kV | 10% | 1.60 | Match on footprint, more voltage headroom; check height | |
1210B103K102 |
Middle and high voltage | 1210 | 1 kV | 10% | 1.60 | Mismatch: 1210 footprint | |
MT32B103K102 |
MT automotive, qualified to AEC-Q200 | 1210 | 1 kV | 10% | 1.60 | Mismatch: 1210 footprint; useful where AEC-Q200 is asked | |
1812B103K202 |
Middle and high voltage | 1812 | 2 kV | 10% | 2.50 | Mismatch: 1812 footprint, 2 kV rating |
The 1.5 kV option is the one we would look at first for a rail that sits close to 1 kV, because it buys derating margin without leaving 1206. It is 0.35 mm taller, so check any keep-out under a shield. Confirm against both datasheets and qualify in your own circuit.
What should a Korean equipment engineer check before crossing a high voltage MLCC?
Four fields, in this order. For a high voltage MLCC cross, check rated voltage against the real peak including transients, the dielectric (C0G/NP0 for dividers and snubbers, X7R for bulk), case size against creepage on your board, and thickness against any shield or connector; the part number alone does not tell you which matters most.
Walsin’s codes help. In 1206B103K152, 1206 is the case, B is X7R, 103 is 10 nF, K is 10 percent and 152 is 1.5 kV. In 1808N221J302, N is C0G/NP0 and 302 is 3 kV. If the board flexes at a screw boss or press-fit connector, a soft-termination part such as SH31B103K102 is worth a look; flex cracking and board bend explains why. We supply a certificate of conformity per shipment on request.
Which high voltage MLCC are on the Hong Kong shelf?
Sixty-one lines. Our stock list as at 9 November 2026 holds 61 Walsin MLCC lines rated 1 kV or more, including 1206B103K102 (10 nF, 1 kV), 1206B102K102 (1 nF, 1 kV), 1808N221J302 (220 pF, 3 kV, C0G/NP0) and 1812B122K202 (1.2 nF, 2 kV).
We checked each of the 61 against the export. Those lines are on our shelf in Hong Kong (snapshot 9 Nov 2026), which suits a prototype build or a first article for a test-bed evaluation. Anything else in the 1,800 is to order: request a quote and we source it through our authorised Walsin channel. The ready-stock list is a dated snapshot, never live-synced, and we make no stock or lead-time promise.
How Venatech helps
How Venatech helps is a high-voltage cross with every difference stated. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a list of kilovolt capacitors returns candidates field by field.
Paste your high voltage MLCC codes into the cross-reference tool, or upload the whole BOM and request a quote. Check the ready-stock snapshot, dated 9 November 2026. We serve Yongin, Icheon, Pyeongtaek and Hwaseong from Hong Kong, in small lots with fast quotes. Walsin is our authorised line; Stackpole and Viking are lines we supply. We give no customs or compliance advice; confirm that with your compliance team.
The short version
Korea JoongAng Daily reported on 16 November 2026 that SK hynix is building an 874.6 billion won open test bed in Yongin for small materials, parts and equipment suppliers. Those suppliers build high-voltage boards. Walsin covers the high voltage MLCC brief with 1,800 parts at 1 kV or more, seven of them a 10 nF, 1206 fit at 1 kV or 1.5 kV, and 61 lines are on our Hong Kong shelf.
Send us your kilovolt capacitor positions and we will return crosses with voltage, dielectric, case and height stated. Which of your rails sits closest to its capacitor’s rating?
Related reading
- Middle and high voltage MLCC, 200 V to 4 kV
- MLCC DC bias and voltage derating
- Flex cracking and board bend: why soft termination exists
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 16 November 2026
Sources
Fetched 16 November 2026.
- Korea JoongAng Daily, report on the SK hynix Trinity Fab test bed in Yongin, 16 November 2026: https://www.koreajoongangdaily.com/business/inside-sk-hynixs-655-million-chip-test-bed/12971453
- Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_07.xlsx, re-measured 16 November 2026; Venatech stock list as at 9 November 2026.
Frequently asked questions
What is SK hynix building in Yongin, South Korea?
Korea JoongAng Daily reported on 16 November 2026 that SK hynix is building Trinity Fab, an open semiconductor test bed in its Y1 fab in Yongin, with a budget of 874.6 billion won and 51 tools, aimed at small materials, parts and equipment suppliers.
How many high voltage MLCC does Walsin offer at 1 kV or more?
We counted 1,800 distinct Walsin parts rated 1 kV or more: 752 at 1 kV, 450 at 2 kV and 513 at 3 kV and above, from 0805 to 2225. 1206 is the busiest case with 463 parts.
Which Walsin part crosses a 10 nF 1 kV capacitor in 1206?
Five parts at 1 kV: 1206B103J102, 1206B103K102, 1206B103M102, SH31B103K102 and SH31B103M102. Two more, 1206B103K152 and SH31B103K152, are rated 1.5 kV. Confirm against both datasheets and qualify in your own circuit.
Should I use C0G/NP0 or X7R for a high voltage MLCC?
Use C0G/NP0 where the value must hold under bias, such as dividers and resonant snubbers. Use X7R for bulk filtering, and derate it, because Class II capacitance falls as DC bias rises.
Can Venatech supply high voltage MLCC to equipment makers in South Korea?
Yes. Venatech crosses and quotes Walsin high voltage MLCC from Hong Kong for equipment and parts makers in South Korea, in small lots. We confirm availability, date code and lead time on each quote.
Is Venatech an authorised Walsin distributor?
Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong. Stackpole and Viking are lines we supply, not authorised lines.