NEWS

High Voltage MLCC for Fuel-Cell and Data-Centre Power in the USA: Google’s 17 Billion US Dollar Wyoming Campus, 702 MW of Fuel Cells and 1,800 Walsin Capacitors at 1 kV or More

Google’s 17 billion US dollar Wyoming data centre, announced on 5 November 2026, is to draw on a 702 MW fuel-cell plant. Converters on that scale use high voltage MLCC as snubbers and filters, and Walsin Technology (Walsin) lists 1,800 at 1 kV or more. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for power-electronics engineers, and the buyers who support them, at data-centre power, fuel-cell, UPS and EMS makers in the USA. The Wyoming announcement is about a campus and its power supply, not about capacitors, and we make no claim about which companies build its equipment or what parts they use. What the project does show is where US data-centre power is heading: on-site generation, higher DC voltages and large converter fleets. On 18 November 2026 we re-measured Walsin’s MLCC export (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, 23,360 part numbers) for every capacitor rated 630 V and above.

What did Google announce for Wyoming in November 2026?

A campus with its own power plant. The Next Web reported on 5 November 2026 that Google will invest 17 billion US dollars in its first Wyoming data centre, in Laramie County, powered in part by a 702 MW fuel-cell plant built by American Electric Power and Bloom Energy and due to be fully operating by the end of 2028.

Google will buy the plant’s output under a 20-year agreement, the same report says, and emissions from the fuel cells are to be stored underground at a carbon-sequestration hub run by Tallgrass Energy. Silicon UK wrote on 6 November 2026 that Google said it would pay for all the power the data centre uses, and that Tallgrass and Black Hills Energy are also partners. The data centre itself is to be air-cooled. None of this says anything about component supply, and we do not suggest it does.

Why does a fuel-cell data centre raise a high voltage MLCC question?

Because every fuel-cell stack feeds a power converter. A fuel cell makes direct current, so a 702 MW plant needs a fleet of DC-DC and DC-AC converters, and each converter uses high voltage MLCC, typically 630 V to 2 kV, as snubbers across switches and as filter capacitors on the DC bus.

The same applies inside the data hall, where rack power is moving to higher DC voltages. For a design engineer, the questions are practical: which voltage rating leaves margin over the bus, which dielectric survives the ripple and temperature, and whether the case size fits the creepage the safety standard asks for. For a buyer, the question is whether each high voltage line has a second source. Our guide to middle and high voltage MLCC from 200 V to 4 kV covers Walsin’s range, and the note on the high voltage MLCC capacitance limit shows how quickly capacitance falls as voltage rises.

How many Walsin high voltage MLCC are rated 1 kV or more?

One thousand eight hundred. We parsed all 23,360 rows of Walsin’s MLCC export and counted 2,728 distinct part numbers rated 630 V or more, and 1,800 rated 1 kV or more: 942 C0G (NP0) and 858 X7R, up to 6 kV.

Rated voltage Part numbers Note
630 V 928 Common snubber and 400 V bus rating
1 kV 752 1206 to 2225 for X7R
1.25 kV to 1.5 kV 62
2 kV 450
2.5 kV to 4 kV 376
5 kV and 6 kV 160
Total at 630 V or more 2,728 1,800 at 1 kV or more

The X7R parts at 1 kV or more run from 0805 to 2225, with 194 in 1206 and 172 in 1812, and reach 220 nF. Most sit in Walsin’s Middle to High Voltage series; others are in the soft-termination SH series, the AEC-Q200 MT series and the big-case series for 1825, 2220 and 2225. Check the datasheet for each series before you design: the export gives rated voltage and size, and the datasheet gives the voltage-coefficient and creepage notes that decide the final pick. The MLCC range page links the series datasheets.

Which 1 kV MLCC fits a 10 nF snubber in a 1206 footprint?

Two or three parts, depending on the board. For a 10 nF, 1 kV X7R snubber in a 1206 footprint, Walsin offers 1206B103K102 in the high voltage series and SH31B103K102 in the soft-termination series, both 1.25 mm thick; larger cases add more creepage.

This is a worked example, not a design rule. The match column assumes a 10 nF, 1 kV, X7R brief in a 1206 footprint, no automotive requirement, and a board that flexes in handling.

Walsin part Case Series Tolerance Thickness Match / mismatch for the example brief Your incumbent
1206B103K102 1206 Middle to High Voltage ±10 % 1.25 mm Match on value, voltage and footprint; on our shelf
SH31B103K102 1206 Soft termination (SH) ±10 % 1.25 mm Match, and better on board flex
1206B103J102 1206 Middle to High Voltage ±5 % 1.25 mm Match, tighter tolerance
0805B103K102 0805 Middle to High Voltage ±10 % 1.25 mm Mismatch on footprint and creepage; on our shelf
1210B103K102 1210 Middle to High Voltage ±10 % 1.60 mm Mismatch on footprint; more creepage
MT32B103K102 1210 AEC-Q200 (MT) ±10 % 1.60 mm Mismatch on footprint; use where AEC-Q200 is asked

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

Put your incumbent in the last column, compare both datasheets, and test the snubber at your switching frequency and temperature. X7R loses capacitance under DC bias, so check the bias curve at your working voltage. Our guide to MLCC DC bias and voltage derating explains how.

Which high voltage MLCC are on the shelf in Hong Kong?

Ninety part numbers at 630 V or more. We checked all 2,728 part numbers rated 630 V or more against our ready-stock snapshot dated 9 November 2026: 90 are on our shelf in Hong Kong, 61 of them rated 1 kV or more.

The 61 include 34 at 1 kV, 12 at 2 kV and 11 at 3 kV, for example 1206B103K102, 1812B332K102, 1812B122K202 and 1808N221J302. On our shelf in Hong Kong (snapshot 9 November 2026) means held on that date; it is not a promise of quantity or date code today. Anything else in the 2,728 is to order: request a quote and we source it through our authorised Walsin channel, confirming availability, date code and lead time on each quote.

How Venatech helps

How Venatech helps is a checked cross before the build. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a list of high voltage capacitors returns Walsin candidates with voltage, dielectric and size differences stated.

Paste your capacitor part numbers into the cross-reference tool, or upload the converter BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve US buyers in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply. For tariffs or import rules, confirm with your compliance team.

The short version

Google announced a 17 billion US dollar Wyoming data centre on 5 November 2026, backed by a 702 MW fuel-cell plant due by the end of 2028. Fuel-cell and data-centre converters need high voltage MLCC as snubbers and DC-bus filters. Walsin lists 2,728 MLCC at 630 V or more and 1,800 at 1 kV or more; for a 10 nF 1 kV snubber in 1206, 1206B103K102 was on our shelf in Hong Kong on 9 November 2026.

Send us the high voltage capacitor lines from your converter, and we will return Walsin crosses with voltage and size stated. Which snubber on that board has a single source today?

Related reading

Last reviewed: 18 November 2026

Sources

Fetched 18 November 2026.

  • The Next Web, “Google’s first Wyoming data centre will run on gas with carbon capture”, 5 November 2026: https://thenextweb.com/news/google-wyoming-data-centre-17b-fuel-cells-carbon-capture
  • Silicon UK, “Google To Invest 17bn In Wyoming Data Centre”, 6 November 2026: https://www.silicon.co.uk/cloud/datacenter/google-wyoming-data-centre-632219
  • Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 18 November 2026; Venatech ready-stock snapshot dated 9 November 2026.

Frequently asked questions

How will Google’s Wyoming data centre be powered?

The Next Web reported on 5 November 2026 that a 702 MW fuel-cell plant built by American Electric Power and Bloom Energy will supply it under a 20-year deal, due to be fully operating by the end of 2028.

What is a high voltage MLCC used for in a data-centre power supply?

Mainly as a snubber across switching devices and as a filter on the DC bus. Ratings of 630 V to 2 kV are common in converters fed from high-voltage DC.

How many Walsin MLCC are rated 1 kV or more?

We counted 1,800 distinct part numbers at 1 kV or more in Walsin’s export, 942 C0G and 858 X7R, out of 2,728 at 630 V or more.

Should a 1 kV snubber capacitor be C0G or X7R?

C0G holds capacitance under bias and temperature but tops out at lower values; X7R reaches more capacitance in the same case. Choose by the value and stability your snubber needs, then confirm on the bench.

Which 1 kV MLCC are in stock in Hong Kong for US buyers?

Sixty-one part numbers at 1 kV or more were on our shelf in Hong Kong in the snapshot dated 9 November 2026, including 1206B103K102. We confirm availability on each quote.

Is Venatech an authorised Walsin distributor for buyers in the USA?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in the USA in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!