NEWS

High Q Capacitor for Optical Modules in China’s Wuhan: 1,702 Walsin HH Parts, 217 in 0201

A high Q capacitor is the low-loss C0G part used for matching, filtering and bias networks on the RF and clock sections of an optical module. Walsin’s HH series lists 1,702 of them from 0201 to 0805, 217 in 0201, and 21 sit on our Hong Kong shelf. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for hardware engineers and component buyers at optical module and optical communications plants in Wuhan, Hubei Province, China. Walsin Technology (Walsin) is the line we are authorised for. We counted the High Q and Low ESR (HH) series in our MLCC upload files, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx (23,360 distinct part numbers), on 16 November 2026, and checked every result against our ready stock snapshot dated 9 November 2026.

What is being built for optical modules in Wuhan’s Optics Valley?

A mass-production line for 800G and 1.6T modules. China Daily reported on 13 February 2026 that HGTECH’s automated line in the Wuhan East Lake High-tech Development Zone, the Optics Valley of China, began making high-speed optical modules on 3 February, aiming at over 40 million modules a year by 2027.

The same report put the expected annual output value above 30 billion yuan and said the company planned to lift 800G and 1.6T capacity by more than 50 percent in 2026. Those are the company’s figures as reported, not ours. A separate China Daily regional report on 26 January 2026 said the Optics Valley’s optoelectronic information industry passed 650 billion yuan in 2025. For a buyer, the point is volume: tens of millions of modules a year means tens of millions of small C0G capacitors, and a second source for each of them is worth having on file before a ramp, not during one.

Where does a high Q capacitor sit on an optical module board?

Wherever loss and stability at gigahertz frequencies matter more than bulk capacitance. A high Q capacitor in 0201 or 0402, typically from 0.1 pF to a few tens of picofarads, appears in impedance-matching networks, RF filters, bias-tee and clock circuits around the laser driver, the transimpedance amplifier and the clock-recovery stages.

A C0G (NP0) dielectric holds its value with temperature and DC bias, which is why these positions use it, and a high-Q build lowers the series resistance (ESR) so less signal is lost as heat. Bulk decoupling on the same board is a different job and usually goes to X5R or X7R. A 0201 body keeps the parasitic inductance and the pad footprint small, which matters on a dense module PCB. Our post on high Q and low ESR MLCC for RF explains how Q and ESR relate and what the datasheet curve shows.

How many high Q capacitors does Walsin list, and in which sizes?

1,702, all C0G. We counted 1,702 distinct HH part numbers in our export: 217 in 0201, 508 in 0402, 514 in 0603 and 463 in 0805, rated from 10 V to 250 V; 125 of them carry the tight plus or minus 0.05 pF tolerance.

Case size HH parts Capacitance span On the Hong Kong shelf (9 Nov 2026)
0201 217 0.1 pF to 100 pF 4
0402 508 0.1 pF to 470 pF 9
0603 514 0.3 pF to 3,300 pF 6
0805 463 0.47 pF to 390 pF 2

In 0201, 129 of the 217 HH parts sit at 10 pF or below, which is the region most RF matching lands in. Tolerance coding follows Walsin’s own scheme: A is plus or minus 0.05 pF, B plus or minus 0.1 pF and C plus or minus 0.25 pF for small values. Across the series, 514 parts carry a tolerance of 0.1 pF or tighter.

Which Walsin parts answer a 1.0 pF, 0201 high Q brief?

Thirty-nine part numbers in six series. For 1.0 pF, C0G, 0201 we found 39 Walsin part numbers across the HH, RF, UF, MT, MG and General Purpose series; 20 are rated 50 V or more, and 14 of those also hold 0.1 pF or tighter.

Brief: 1.0 pF, C0G, 0201, 0.1 pF, 50 V Walsin part Series Match / mismatch Your incumbent
High Q, as briefed HH03N1R0B500 HH high Q and low ESR Match
Microwave series RF03N1R0B500 RF microwave Match; check the Q curve against HH
Ultra microwave, higher rating UF03N1R0B101 UF ultra microwave Match, 100 V adds headroom
Automotive grade MT03N1R0B500 MT, AEC-Q200 Match, adds AEC-Q200
General purpose C0G 0201N1R0B500 General Purpose Match on value; Q not specified as high Q
Looser tolerance HH03N1R0C500 HH Mismatch: 0.25 pF tolerance
Lower rating HH03N1R0B250 HH Mismatch: 25 V

Leave the last column for your current part. Two parts with the same value and tolerance can still differ in Q at your operating frequency, so read both datasheet curves. Our guide on how to cross-reference an MLCC sets out the order in which to check the fields.

Which Walsin high Q capacitors are on the Hong Kong shelf?

Twenty-one HH parts. We checked all 1,702 HH part numbers against our ready stock snapshot dated 9 November 2026: 21 are on our shelf in Hong Kong (snapshot 9 Nov 2026), four of them in 0201, including HH03N0R4B500 at 0.4 pF and HH03N1R8B500 at 1.8 pF.

The other two 0201 lines are HH03N4R7C500 at 4.7 pF and HH03N0R9A250 at 0.9 pF with the 0.05 pF tolerance. In 0402 the shelf holds nine HH lines, among them HH15N2R4A500 at 2.4 pF, and in 0603 six, among them HH18N0R5B101 at 0.5 pF and 100 V. Lines that are not on the snapshot can be ordered: request a quote and we source them through our authorised Walsin channel. The ready stock list is a dated snapshot, and stock moves; we confirm availability on each quote and make no lead-time or stock promise. The MLCC range page shows every Walsin series.

How Venatech helps

Cross the RF and clock capacitors on a module in one paste. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and 21 of the high Q parts in this post are on our Hong Kong shelf snapshot dated 9 November 2026.

Paste your capacitor lines into the cross-reference tool, filtering for high Q or low ESR, and every difference from your original is stated. For a full module BOM, upload it at /bom/ and request a quote through the site. We work from Hong Kong, and quote small lots for pilot builds and engineering samples. Qualification stays with your team.

The short version

  • HGTECH began mass-producing high-speed optical modules in Wuhan’s Optics Valley on 3 February 2026 and aims at over 40 million a year by 2027 (China Daily, 13 February 2026).
  • Walsin’s HH high Q series lists 1,702 C0G parts: 217 in 0201, 508 in 0402, 514 in 0603 and 463 in 0805.
  • A 1.0 pF, 0201, C0G brief returns 39 Walsin part numbers in six series; 14 hold 50 V and 0.1 pF or tighter.
  • 21 HH parts are on our shelf in Hong Kong (snapshot 9 Nov 2026), four in 0201.

Send us the RF, bias and clock capacitor lines from your Wuhan module BOM and we will return the Walsin crosses with every difference stated. Which frequency does your Q requirement apply at?

Related reading

Last reviewed: 16 November 2026

Sources

Fetched 16 November 2026.

  • China Daily (government portal), HGTECH optical module supplier report, 13 February 2026: https://govt.chinadaily.com.cn/s/202602/13/WS69a16430498e36855033ad66/huagong-genuine-becomes-leading-optical-module-supplier.html
  • China Daily / Invest in China, Optics Valley GDP and industry report, 26 January 2026: https://www.chinaservicesinfo.com/s/202601/26/WS6981ae72498e23165e06d3b0/ovc-leads-wuhan-gdp-growth-for-seven-consecutive-years.html
  • Venatech MLCC upload files Venatech_MLCC_Upload_01.xlsx to _08.xlsx and ready stock snapshot dated 9 November 2026, re-measured 16 November 2026.

Frequently asked questions

What is a high Q capacitor?

A capacitor with very low internal loss at high frequency, usually a C0G MLCC with low ESR. Walsin’s HH series is its high Q and low ESR range, 1,702 parts in our count of 16 November 2026.

Does Walsin make a high Q capacitor in 0201?

Yes. 217 HH parts are 0201, from 0.1 pF to 100 pF, and 129 of them sit at 10 pF or below.

Which Walsin part crosses a 1.0 pF, 0201, 50 V high Q capacitor?

HH03N1R0B500, at plus or minus 0.1 pF. RF03N1R0B500 and UF03N1R0B101 are alternatives in the microwave series. Confirm Q and self-resonant frequency in both datasheets.

Is a high Q capacitor needed for decoupling on an optical module?

Usually not. Bulk decoupling uses X5R or X7R parts; high Q C0G parts go into matching, filter, bias and clock positions where loss matters.

Does Venatech hold Walsin high Q capacitors in Hong Kong?

21 HH parts are on our ready stock snapshot dated 9 November 2026, including HH03N0R4B500 and HH03N1R8B500 in 0201. Other lines are sourced on request through our authorised Walsin channel.

Can Venatech supply optical module makers in Wuhan, China?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots into China. Use the free cross-reference tool or upload a BOM; confirm import rules with your compliance team.


Share This, Choose Your Platform!