NEWS

AEC-Q200 Soft Termination MLCC for EV Electronics in China’s Xi’an: 116 Walsin ST Parts, 14 at 100 nF

An AEC-Q200 soft termination MLCC pairs automotive qualification with a flexible electrode that resists board-bend cracking. Walsin’s ST series lists 116 such parts from 0402 to 2220, 14 of them at 100 nF and 16 rated 1 kV or more, for EV boards built around Xi’an. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for automotive electronics engineers and buyers in Xi’an, Shaanxi Province, China, and for the module and board suppliers that serve the city’s vehicle plants. Walsin Technology (Walsin) is the line we are authorised for. We filtered our MLCC upload files, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx (23,360 distinct part numbers), to the ST series on 16 November 2026 and checked the result against our ready stock snapshot dated 9 November 2026.

What is BYD doing at its Xi’an production base?

Hiring at scale for a four-phase vehicle site. CnEVPost reported on 22 September 2026 that BYD is recruiting more than 8,000 workers across several facilities at its Xi’an base, whose four factory phases are planned for up to one and a half million vehicles a year; output there passed one million vehicles in 2024.

The same report, citing China’s National Bureau of Statistics, put Shaanxi’s August 2026 vehicle output at 138,900 units, up 17.9 percent on a year earlier, after a weak first seven months. Those are the report’s figures, not ours. A vehicle plant on that scale pulls in battery-management, on-board-charger, DC-DC and body-electronics boards from nearby suppliers, and each of those boards carries dozens of automotive-grade MLCC. We make no statement about which suppliers any carmaker uses.

Why do EV boards use an AEC-Q200 soft termination MLCC?

Because large ceramic capacitors crack when the board bends, and EV boards bend. A soft termination MLCC adds a conductive polymer layer between the ceramic body and the outer plating, so board flexure from depaneling, screw mounting or thermal cycling is absorbed by the termination instead of cracking the ceramic; the ST series combines that with AEC-Q200.

The risk grows with case size: a 1206 or 1210 part on a long BMS or inverter control board sees more strain than an 0402. A flex crack can stay invisible at end-of-line test and later show up as leakage or a short, which is why many automotive designs specify soft termination for larger cases and for parts near connectors, screw holes and board edges. Walsin’s SH and SG series offer soft termination for industrial and consumer boards; ST is the version qualified to AEC-Q200. Our explainer on flex cracking and board bend shows where the cracks start, and what AEC-Q200 actually certifies covers the paperwork to request.

How many AEC-Q200 soft termination MLCC does Walsin list?

  1. We counted 116 distinct ST part numbers in our export, 113 in X7R and 3 in C0G, from 0402 to 2220, rated from 10 V to 3,000 V; 0603 has the most at 34, and 16 parts are rated 1 kV or more for high-voltage EV circuits.
Case size ST parts Rating span Capacitance span
0402 1 16 V 100 nF
0603 34 25 V to 100 V 1 nF to 220 nF
0805 24 25 V to 100 V 1 nF to 1 uF
1206 27 16 V to 1 kV 1.5 nF to 10 uF
1210 22 10 V to 1.25 kV 10 nF to 22 uF
1812, 1825, 2220 8 100 V to 3 kV 100 pF to 10 uF

The high-voltage end includes ST31B222K102, 2.2 nF at 1 kV in 1206, and ST55B103K302, 10 nF at 3 kV in 2220, which suit snubber and isolation positions on traction-inverter and on-board-charger boards. At the bulk end, ST32B226K250 gives 22 uF at 25 V in 1210. We have not seen the ST split counted this way anywhere else.

Which Walsin parts answer a 100 nF, 0603, 50 V automotive brief?

Fourteen ST parts sit at 100 nF. For a 100 nF, X7R, 0603, 50 V, 10 percent brief with soft termination and AEC-Q200, we found an exact ST match, a 100 V upgrade in the same body, and larger-case options, plus non-soft and non-automotive alternatives that differ in one field.

Brief: 100 nF, X7R, 0603, 50 V, 10%, soft term, AEC-Q200 Walsin part Series Match / mismatch Your incumbent
As briefed ST18B104K500 ST Match
More voltage headroom ST18B104K101 ST Match, 100 V
Larger body ST21B104K101 ST Match in 0805, 100 V; larger footprint
Lower rating ST18B104K250 ST Mismatch: 25 V
Smallest body ST15B104K160 ST Mismatch: 0402 and 16 V
Automotive, standard termination MT18B104K500 MT, AEC-Q200 Mismatch: no soft termination
Soft termination, not automotive SH18B104K500 SH Mismatch: no AEC-Q200

Leave the last column for your current part and check thickness, the DC bias curve and the qualification report against both datasheets. The soft termination MLCC guide compares SH, SG, ST and VT side by side.

What is on the Hong Kong shelf for soft termination MLCC?

Twenty-nine SH parts. We checked the ST, SH and SG soft termination series against our ready stock snapshot dated 9 November 2026: 29 SH parts are on our shelf in Hong Kong (snapshot 9 Nov 2026), including SH18B104K500 at 100 nF, 50 V in 0603 and SH31B154K101 at 150 nF, 100 V in 1206.

The ST automotive lines are to order: request a quote and we source them through our authorised Walsin channel. That suits a common sequence in automotive work, where an SH part from the shelf goes onto prototype boards while the ST part with its AEC-Q200 documents is ordered for the qualified build, though the switch must be planned and documented by your own quality team. The ready stock list is a dated snapshot and stock moves; we confirm availability, date code and lead time on each quote. The MLCC range page shows every Walsin series.

How Venatech helps

Cross the automotive capacitor lines on an EV board in one paste. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and its grade filter lists the AEC-Q200 version beneath the commercial part wherever one exists.

Paste your lines into the cross-reference tool, set the grade to automotive and the special requirement to soft termination, and every difference from your original is stated. For a whole BMS or charger BOM, upload it at /bom/ and request a quote through the site. We serve China from Hong Kong in small lots, which suits prototype and pre-series builds, and qualification stays with you.

The short version

  • BYD is hiring more than 8,000 workers at its Xi’an base, planned for up to one and a half million vehicles a year (CnEVPost, 22 September 2026).
  • Walsin’s ST series lists 116 AEC-Q200 soft termination MLCC, 113 X7R and 3 C0G, from 0402 to 2220.
  • 14 ST parts sit at 100 nF; ST18B104K500 matches a 100 nF, 0603, 50 V brief.
  • 16 ST parts are rated 1 kV or more, up to 3 kV in 2220.
  • 29 SH soft termination parts are on our shelf in Hong Kong (snapshot 9 Nov 2026).

Send us the large-case and high-voltage capacitor lines from your Xi’an EV board and we will return the Walsin ST crosses with every difference stated. Which of your MLCC sit within a few millimetres of a screw hole or board edge?

Related reading

Last reviewed: 16 November 2026

Sources

Fetched 16 November 2026.

  • CnEVPost, BYD launches mass hiring at Xi’an production base, 22 September 2026: https://cnevpost.com/2026/09/22/byd-launches-mass-hiring-xian-production-base/
  • Venatech MLCC upload files Venatech_MLCC_Upload_01.xlsx to _08.xlsx and ready stock snapshot dated 9 November 2026, re-measured 16 November 2026.

Frequently asked questions

What is an AEC-Q200 soft termination MLCC?

A ceramic capacitor with a flexible polymer layer in its termination that is also qualified to the AEC-Q200 automotive stress test. Walsin’s ST series is that range, 116 parts in our count of 16 November 2026.

Which Walsin part crosses a 100 nF, 0603, 50 V soft termination automotive MLCC?

ST18B104K500, X7R at 10 percent. ST18B104K101 gives 100 V in the same body. Confirm thickness and the qualification report against both datasheets.

What is the difference between Walsin’s ST and SH series?

Both use soft termination. ST is qualified to AEC-Q200 for automotive use; SH is the industrial and consumer version and is not automotive-qualified.

Does Walsin make high-voltage AEC-Q200 soft termination capacitors?

Yes. 16 ST parts are rated 1 kV or more, including ST31B222K102 at 1 kV in 1206 and ST55B103K302 at 3 kV in 2220.

Does Venatech stock soft termination MLCC in Hong Kong?

29 SH soft termination parts are on our ready stock snapshot dated 9 November 2026, including SH18B104K500. ST automotive lines are sourced on request through our authorised Walsin channel.

Can Venatech supply EV electronics makers in Xi’an, China?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots into China. Use the free cross-reference tool or upload a BOM; confirm import rules with your compliance team.


Share This, Choose Your Platform!