An 0402 inductor is the workhorse of a phone’s RF matching and filter networks. We counted 1,092 Walsin chip inductors and ferrite beads in the 0402 case, 1,002 of them specified in nanohenries, and a 10 nH, 5 percent brief crosses to seven series. Venatech is the authorised Walsin distributor in Hong Kong, serving Thai Nguyen, Vietnam.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for RF engineers and component buyers at phone, camera-module and electronics suppliers in Thai Nguyen province and around Hanoi. Walsin Technology (Walsin) is the line we are authorised for. We filtered our inductor upload files, Venatech_Inductor_Upload_01.xlsx and Venatech_Inductor_Upload_02.xlsx (5,411 distinct part numbers), to the 1005 metric (0402) case on 16 November 2026. Every part number below is real.
How big is Samsung’s phone production in Thai Nguyen?
Big enough to set the tempo for the province’s suppliers. VietNamNet reported on 3 September 2026 that Samsung Thai Nguyen took more than 16 billion US dollars in revenue and about 1.1 billion US dollars in profit in the first half of 2026.
The same report says Samsung’s smartphone plants in Bac Ninh and Thai Nguyen had reached cumulative exports of about 500 billion US dollars by the end of June, after 17 years in Vietnam. The Investor, on 6 January 2026, named Samsung Electronics Vietnam Thai Nguyen and Samsung Electro-Mechanics Vietnam as the main Samsung production units in the province. Those are the publications’ figures, not ours, and we make no claim about whose parts any of these plants use. What they tell a buyer is simple: Thai Nguyen runs high-volume phone and module assembly, and every phone RF front end carries dozens of small inductors in its matching, filter and bias networks.
How many 0402 inductors does Walsin list?
1,092. We counted 1,092 distinct Walsin part numbers in the 0402 case: 1,002 inductors specified in nanohenries, from 0.3 nH to 150 nH, and 90 ferrite beads and chip beads specified by impedance at 100 MHz.
| Series group | 0402 parts | Inductance span | Q min at 10 nH | Thickness |
|---|---|---|---|---|
| WCI and WCA | 348 | 1.0 nH to 120 nH | 21 | 0.66 mm |
| WLCW and WQCW | 284 | 1.0 nH to 120 nH | 21 | 0.66 mm |
| WLCM | 134 | 0.3 nH to 150 nH | 8 | 0.5 mm |
| MCI and MCI Automotive | 232 | 0.3 nH to 150 nH | 8 | 0.5 mm |
| Beads (WLBD, WQBD, MCB, MHC) | 94 | by impedance | n/a | varies |
The table splits the 0402 range into two families that behave differently on a phone board: a high-Q group at 0.66 mm thick and a thinner 0.5 mm group with finer tolerance steps. The MCI Automotive series adds 113 parts for teams that also build in-car electronics. The bead row includes four WQBD parts specified in nanohenries, which is why it reads 94 against the 90 beads counted by unit. We have not seen this 0402 split counted anywhere else.
Which Walsin 0402 inductor crosses a 10 nH, 5 percent RF part?
Seven series answer it. At 10 nH, 5 percent, 0402, we found seven Walsin part numbers in seven series: four with Q min 21 and 480 mA rated current, and three with Q min 8, 0.5 A and a 0.5 mm body.
| Brief: 10 nH, 5 percent, 0402 | Walsin part | Series | Q min | Rdc max | Rated current | Match / mismatch | Your incumbent |
|---|---|---|---|---|---|---|---|
| High-Q, standard body | WLCW1005Z0J10NTB |
WLCW | 21 | 0.2 ohm | 480 mA | Match | |
| High-Q, standard body | WQCW1005Z0J10NTB |
WQCW | 21 | 0.2 ohm | 480 mA | Match | |
| High-Q | WCI1005CP10NJ |
WCI | 21 | 0.2 ohm | 480 mA | Match | |
| High-Q | WCA1005CP10NJ |
WCA | 21 | 0.2 ohm | 480 mA | Match | |
| Thin body | WLCM1005Z0J10NTB |
WLCM | 8 | 0.3 ohm | 0.5 A | Match on value; lower Q | |
| Thin body | MCI1005HQ10NJHBP |
MCI | 8 | 0.3 ohm | 0.5 A | Match on value; lower Q | |
| Thin body, automotive | MCI1005HZ10NJHBP |
MCI Automotive | 8 | 0.3 ohm | 500 mA | Match on value; lower Q | |
| Tighter tolerance | WLCW1005Z0G10NTB |
WLCW | 21 | 0.2 ohm | 480 mA | Mismatch in tolerance (2 percent); tighter than the brief |
Leave the last column for your current part and confirm each line against Walsin’s datasheet, for example WLCW1005.pdf and MCI1005HQ.pdf on Walsin’s own site. Our post on inductors for RF matching networks explains which fields move a match.
Should a phone RF match use a high-Q or a thin 0402 chip inductor?
High-Q where loss matters; thin where height or tolerance matters. In our 10 nH comparison the WLCW, WQCW, WCI and WCA parts publish Q min 21 and 0.2 ohm Rdc, while WLCM and MCI publish Q min 8 and 0.3 ohm, in a body 0.5 mm thick rather than 0.66 mm.
A matching network in an antenna path or a power-amplifier output wastes signal in every ohm of loss, so a higher Q usually buys back insertion loss and range. A bias choke or a low-frequency filter cares less about Q. Thickness counts under a shield can or in a stacked camera module. At low values both groups also offer absolute tolerance steps: at 2.2 nH we found WCI and WCA parts at 0.1 nH, 0.2 nH and 0.5 nH, and WLCM and MCI parts at 0.1 nH, 0.2 nH and 0.3 nH, which helps when a match is tuned by simulation. Our comparison of multilayer and wirewound chip inductors covers the trade in more depth, and self-resonant frequency explains why the SRF must sit well above your band.
What should a Thai Nguyen buyer check before switching an 0402 inductor?
Five fields, in this order. For an 0402 RF inductor, check inductance and tolerance, Q at the test frequency, self-resonant frequency, Rdc and rated current, and body thickness; in our 10 nH set, only tolerance and the Q group separate the seven parts.
- Inductance and tolerance code: percentage codes (G, J, K) and absolute codes (B, C, D, S) are not interchangeable on low values.
- Q min and the frequency it is quoted at.
- Self-resonant frequency against your highest band.
- Rdc and rated current, which matter on bias lines.
- Thickness, 0.5 mm against 0.66 mm, under shields.
Write the incumbent part in the table above and the differences become plain. A matched value with a different Q group is a layout re-tune, not a drop-in, so plan a quick RF check on the pilot build.
How Venatech helps: how does a Thai Nguyen team cross its 0402 inductor lines?
How Venatech helps: one upload for the whole RF bill of materials. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, including the 1,092 0402 inductors and beads in this post.
Paste an incumbent 0402 inductor into the free cross-reference tool to see the Walsin candidates with every differing field shown, or upload the full BOM at /bom/ and request a quote through the site. We check each line against our ready stock list, a dated snapshot held in Hong Kong (9 November 2026); lines not on it are quoted through our authorised Walsin channel. We serve Vietnam from Hong Kong in small lots, which suits NPI and pilot runs, and we confirm availability, date code and lead time on each quote. The inductor range page lists every series.
The short version
- Samsung Thai Nguyen took more than 16 billion US dollars in revenue in the first half of 2026 (VietNamNet, 3 September 2026).
- Walsin lists 1,092 chip inductors and beads in 0402: 1,002 in nanohenries from 0.3 nH to 150 nH, and 90 beads.
- A 10 nH, 5 percent 0402 brief crosses to seven Walsin parts in seven series.
- High-Q parts publish Q min 21 and 0.66 mm; thin parts publish Q min 8 and 0.5 mm.
Send us the 0402 inductor lines from your Thai Nguyen phone or module board and we will return the Walsin crosses with every difference stated. Which band is your tightest match tuned for?
Related reading
- Inductors for RF matching networks
- Multilayer vs wirewound chip inductors
- Inductor self-resonant frequency
- Free cross-reference tool, BOM upload and ready stock snapshot
Last reviewed: 16 November 2026.
Sources
Fetched 16 November 2026.
- VietNamNet, Samsung’s Vietnam factories surge back with 2.3 billion profit, 3 September 2026: https://vietnamnet.vn/en/samsung-s-vietnam-factories-surge-back-with-2-3-billion-profit-2551241.html
- The Investor, 4.4 billion flows into northern Vietnam province Thai Nguyen, 6 January 2026: https://theinvestor.vn/44-bln-flows-into-northern-vietnam-province-thai-nguyen-d18036.html
- Venatech inductor upload files Venatech_Inductor_Upload_01.xlsx and _02.xlsx, re-measured 16 November 2026; Walsin datasheets WLCW1005.pdf, WCI1005CP.pdf and MCI1005HQ.pdf as linked in the export.
Frequently asked questions
How many 0402 inductors does Walsin make?
1,092 in our count of 16 November 2026: 1,002 inductors specified in nanohenries, from 0.3 nH to 150 nH, and 90 ferrite beads specified by impedance at 100 MHz.
Which Walsin part crosses a 10 nH 0402 inductor at 5 percent?
WLCW1005Z0J10NTB, WQCW1005Z0J10NTB, WCI1005CP10NJ or WCA1005CP10NJ at Q min 21, or WLCM1005Z0J10NTB and MCI1005HQ10NJHBP in a thinner 0.5 mm body at Q min 8. Confirm Q and SRF at your frequency.
What is a high Q inductor in 0402 from Walsin?
In our 10 nH comparison, the WLCW, WQCW, WCI and WCA series publish Q min 21 with 0.2 ohm Rdc, against Q min 8 for the WLCM and MCI series.
Does Walsin make an automotive 0402 inductor?
Yes. The MCI Automotive series holds 113 parts in 0402, for example MCI1005HZ10NJHBP at 10 nH. Confirm the qualification documents in Walsin’s datasheet.
Can Venatech supply 0402 inductors to Thai Nguyen, Vietnam?
Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to Vietnam. Use the free cross-reference tool or upload a BOM; confirm import rules with your compliance team.
Is Walsin the only line Venatech is authorised for?
Yes. Walsin is the line we are authorised for. We confirm availability, date code and lead time on each quote.