A high voltage MLCC is the snubber, isolation and pulse capacitor beside the power and driver chips that Kuching now makes. We counted 1,800 Walsin MLCC rated from 1 kV to 6 kV, 942 in C0G and 858 in X7R, and 61 are on our shelf in Hong Kong. Venatech is the authorised Walsin distributor in Hong Kong, serving Malaysia.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for power-electronics engineers and buyers in Kuching, the wider Sarawak semiconductor ecosystem and their customers across Malaysia. Walsin Technology (Walsin) is the line we are authorised for. We filtered our MLCC upload files, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx (23,360 distinct part numbers), to a rated voltage of 1,000 V or more on 16 November 2026, and checked the result against our ready stock snapshot dated 9 November 2026. Every part number below is real.
What is X-FAB building in Kuching, Sarawak?
More wafer capacity for automotive, industrial and medical chips. The Sun reported on 14 September 2025 that X-FAB opened a 3 billion ringgit line at the Sama Jaya Free Industrial Zone in Kuching, lifting output from 30,000 to 40,000 wafers a month on its 180 nm BCD-on-SOI process.
The report says the site makes chips for automotive, medical and industrial customers, including power semiconductors for electric vehicles and charging infrastructure and chips for ultrasound. DayakDaily reported on 20 May 2026 that Sarawak’s Deputy Premier counted the X-FAB expansion within 6.8 billion ringgit of reinvestment, alongside OCI Tokuyama in Bintulu and a Western Digital glass-substrate plant, with about 1,300 skilled jobs. Those are the publications’ figures, not ours. For a board designer, a BCD-on-SOI driver or ultrasound pulser chip is only half the circuit: the capacitors beside it must hold several hundred volts to several kilovolts, and that is where a high voltage MLCC comes in. We make no claim about whose parts any named plant uses.
How many high voltage MLCC does Walsin list, and at which voltages?
1,800. We counted 1,800 Walsin MLCC rated 1 kV or more: 752 at 1 kV, 450 at 2 kV, 293 at 3 kV, 150 at 5 kV and the rest spread from 1.25 kV to 6 kV, in sizes from 0805 to 2225.
| Rated voltage | Parts | Highest X7R value | Highest C0G value |
|---|---|---|---|
| 1 kV | 752 | 220 nF | 22 nF |
| 1.5 kV | 59 | 100 nF | 2.2 nF |
| 2 kV | 450 | 56 nF | 10 nF |
| 3 kV | 293 | 18 nF | 1.5 nF |
| 4 kV | 59 | 1.8 nF | 100 pF |
| 5 kV | 150 | 10 nF | 680 pF |
| Other (1.25 to 6 kV) | 37 | up to 10 nF | up to 10 nF |
By series, 1,084 sit in the Middle to High Voltage series, 251 in the big-size 1825, 2220 and 2225 series, 267 in the soft-termination SH, SG and ST series and 160 in the X1/Y2 safety-certified S2 series. Thirty-six carry AEC-Q200 qualification in the MT and ST series, which matters for on-board chargers. By size, 1206 leads with 463 parts, then 1812 with 339 and 1808 with 328. Capacitance falls fast as voltage rises: the X7R ceiling drops from 220 nF at 1 kV to 18 nF at 3 kV.
Which Walsin parts cross a 4.7 nF, 1 kV MLCC brief?
Thirty-three of them. At 4.7 nF and 1 kV we found 33 Walsin part numbers, 20 in X7R and 13 in C0G, from 0805 to 2225, including four AEC-Q200 parts and seven soft-termination parts.
| Brief: 4.7 nF, 1 kV, X7R, 10 percent | Walsin part | Size | Series | Match / mismatch | Your incumbent |
|---|---|---|---|---|---|
| Standard body | 1206B472K102 |
1206 | Middle to High Voltage | Match; on our shelf | |
| Larger creepage | 1210B472K102 |
1210 | Middle to High Voltage | Match; on our shelf; larger footprint | |
| 1812 body | 1812B472K102 |
1812 | Middle to High Voltage | Match; larger footprint | |
| AEC-Q200 | MT32B472K102 |
1210 | MT, AEC-Q200 | Match, adds AEC-Q200 | |
| AEC-Q200, soft termination | ST31B472K102 |
1206 | ST, AEC-Q200 | Match, adds flexure margin | |
| Soft termination | SH31B472K102 |
1206 | SH, Ag-poly | Match | |
| Snubber wanting C0G | 1206N472J102 |
1206 | Middle to High Voltage, C0G | Mismatch in dielectric (C0G, 5 percent); stable under bias |
Write your current part in the last column and compare thickness: the 1206 standard part is 1.25 mm thick and the ST part 1.6 mm, per Walsin’s datasheet WTC_MLCC_Middle_and_High_Voltage.pdf and the MLCC_catalog.pdf linked in our export. Our post on middle and high voltage MLCC from 200 V to 4 kV covers the range by series.
Should a 1 kV snubber or isolation capacitor be C0G or X7R?
C0G for fast edges and stable values; X7R for capacitance per size. In our 1 kV count a C0G part reaches 22 nF against 220 nF in X7R, so X7R gives ten times the value, but a C0G part keeps its capacitance under DC bias and has lower loss.
On a 400 V or 800 V DC bus, an RC snubber across a switching device sees steep edges every cycle, and C0G handles that heat and keeps its value. An X7R part suits bulk bypass or a filter where some loss of capacitance under bias is acceptable, provided you size it on the bias curve. Ultrasound pulser and gate-driver isolation paths carry their own creepage and safety rules; the X1/Y2 S2 series exists for line-connected safety roles. Our posts on MLCC DC bias and voltage derating and the high voltage MLCC capacitance limit go further.
Which Walsin high voltage MLCC are on the Hong Kong shelf?
Sixty-one lines. We checked all 1,800 parts against our ready stock snapshot dated 9 November 2026: 61 are on our shelf in Hong Kong (snapshot 9 Nov 2026), 34 at 1 kV, 12 at 2 kV, 11 at 3 kV and the rest at 1.5 kV, 2.5 kV and 5 kV.
They split 34 X7R and 27 C0G, and by size 19 in 1206, 16 in 1812, 12 in 1808 and 8 in 1210. Examples are 1206B103K102 at 10 nF, 1 kV, 2220B104K102 at 100 nF, 1 kV, 1812B272K202 at 2.7 nF, 2 kV, 1808N221J302 at 220 pF, 3 kV, and the safety-certified S252B222K502 at 2.2 nF, 5 kV. Lines not on the snapshot are to order: request a quote and we source them through our authorised Walsin channel. The ready stock list is a dated snapshot, and the MLCC range page shows every series. We confirm availability, date code and lead time on each quote.
How Venatech helps: how does a Sarawak power-electronics team source high voltage MLCC?
How Venatech helps: cross the high-voltage lines in one pass. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and 61 of the 1,800 parts in this post are on our Hong Kong shelf snapshot.
Paste a snubber or isolation capacitor into the free cross-reference tool, or upload the BOM of a charger, drive or pulser board at /bom/ and request a quote through the site. We serve Malaysia from Hong Kong in small lots, which suits evaluation boards and pilot builds, and we quote fast. Qualification stays with you.
The short version
- X-FAB’s 3 billion ringgit Kuching line lifts output to 40,000 wafers a month for automotive, industrial and medical chips (The Sun, 14 September 2025).
- Walsin lists 1,800 MLCC rated 1 kV to 6 kV: 942 C0G and 858 X7R.
- A 4.7 nF, 1 kV brief crosses to 33 Walsin parts, four of them AEC-Q200.
- 61 Walsin high voltage MLCC are on our Hong Kong shelf snapshot dated 9 November 2026.
Send us the high-voltage capacitor lines from your Kuching or Malaysian power board and we will return the Walsin crosses with every difference stated. What is the peak voltage your snubber actually sees?
Related reading
- Middle and high voltage MLCC, 200 V to 4 kV
- MLCC DC bias and voltage derating
- The high voltage MLCC capacitance limit
- Free cross-reference tool, BOM upload and ready stock snapshot
Last reviewed: 16 November 2026.
Sources
Fetched 16 November 2026.
- The Sun, Germany’s X-FAB unveils new RM3 billion manufacturing line at Sarawak facility, 14 September 2025: https://thesun.my/business/germany-s-x-fab-unveils-new-rm3-billion-manufacturing-line-at-sarawak-facility-le14898311/
- DayakDaily, Sarawak advances technology-driven economy with RM6.8 bil reinvestment by X-FAB, OCI Tokuyama, Western Digital, 20 May 2026: https://dayakdaily.com/sarawak-advances-technology-driven-economy-with-rm6-8-bil-reinvestment-by-x-fab-oci-tokuyama-western-digital/
- Venatech MLCC upload files Venatech_MLCC_Upload_01.xlsx to _08.xlsx and ready stock snapshot dated 9 November 2026, re-measured 16 November 2026.
Frequently asked questions
How many high voltage MLCC does Walsin make?
1,800 rated 1 kV or more in our count of 16 November 2026: 942 C0G and 858 X7R, from 1 kV to 6 kV, with 752 at 1 kV and 450 at 2 kV.
What is the highest-value 1kV MLCC from Walsin?
220 nF in X7R and 22 nF in C0G at 1 kV in our upload files. At 2 kV the X7R ceiling falls to 56 nF, and at 3 kV to 18 nF.
Which Walsin part crosses a 4.7 nF, 1000 V X7R 1206 MLCC?
1206B472K102 in the Middle to High Voltage series, or ST31B472K102 if you need AEC-Q200 and soft termination. Confirm thickness and the bias curve against both datasheets.
Does Walsin make an AEC-Q200 high voltage capacitor?
Yes. We counted 36 AEC-Q200 parts at 1 kV or more in the MT and ST series, for example MT32B472K102 at 4.7 nF in 1210.
Does Venatech stock high voltage MLCC for Malaysia?
61 Walsin MLCC at 1 kV or more are on our ready stock snapshot dated 9 November 2026, including 1206B472K102 and 2220B104K102. Stock moves; other lines are sourced on request.
Can Venatech supply electronics makers in Kuching, Malaysia?
Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to Malaysia. Use the free cross-reference tool or upload a BOM; confirm import rules with your compliance team.