NEWS

Y2 Safety Capacitor for Home Battery Inverters in Australia: 1.04 GWh Installed in October, and Walsin Lists 346 X1/Y2 Capacitors in Disc and Chip Form

For a Y2 safety capacitor in a hybrid battery inverter sold in Australia, Walsin Technology (Walsin) lists 346 X1/Y2 capacitors, 186 disc and 160 surface-mount, and a 2.2 nF, Y2 300 Vac brief returns four disc matches. Venatech, Walsin’s authorised distributor in Hong Kong, crosses your Y capacitor and quotes the Walsin line.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for an EMC or power engineer whose inverters and battery systems are going onto Australian homes at a steady pace. We parsed Walsin’s disc capacitor export, Venatech_DiscCap_Upload_01.xlsx (929 distinct part numbers), the X1/Y2 S2 series in Walsin’s MLCC export, and our Hong Kong stock snapshot dated 9 November 2026. Every part number is real, and the news facts name their source and date.

How many home batteries did Australia install in October 2026?

About 1.04 GWh. ESS News reported on 10 November 2026, citing analyst SunWiz, that Australia installed 1,043 MWh of small-scale battery storage in October, up 9.7 percent on September’s 966.5 MWh and about 18 percent above October 2025, with an average system size of 26.74 kWh.

The same report says the federal Cheaper Home Batteries Program has now passed 600,000 residential and business systems since 1 July 2025, close to 16.6 GWh. New South Wales led October with 356 MWh, ahead of Victoria at 227 MWh and Queensland at 217 MWh. We add no forecast. For an engineer, every one of those systems sits behind a hybrid or battery inverter, and every inverter carries an EMI filter on its AC side.

Where does a Y2 safety capacitor sit in a hybrid battery inverter?

Between line and earth, in the EMI filter. A Y2 safety capacitor shunts common-mode noise from the AC lines to protective earth, and because a failure there could expose a person to shock, it must be a safety-certified class Y part; Walsin’s AC series discs carry X1 440 Vac with Y2 250 Vac or 300 Vac ratings.

An X capacitor across the lines handles differential noise, and a failure there is a fire risk rather than a shock risk, so X1 and X2 ratings are lower-stakes. The Y capacitor is the one an approval body checks first. Total Y capacitance also sets the earth leakage current, so a designer cannot simply add more to pass an EMC scan. Our guide to X1/Y1 vs X1/Y2 safety capacitors explains the classes, and disc capacitor safety classes: AH, AC and AS covers Walsin’s families. The disc capacitor range lists every part.

What does Walsin cover in X1/Y2 safety capacitors?

346 part numbers in two forms. We counted 186 distinct X1/Y2 disc capacitors in Walsin’s AC series and 160 surface-mount X1/Y2 parts in the S2 MLCC series, 346 in all, from 10 pF to 10 nF in the discs.

Walsin X1/Y2 family Part numbers Rating in the export
AC series, small size disc 72 X1 440 Vac / Y2 250 or 300 Vac
AC series, standard disc 42 X1 440 Vac / Y2 250 or 300 Vac
AC series, 500 V small size disc 36 X1 500 Vac / Y2 500 Vac
AC series, automotive disc 23 X1 440 Vac / Y2 300 Vac
AC series, 500 V disc 13 X1 500 Vac / Y2 500 Vac
S2 series, surface-mount MLCC 160 X1/Y2, sizes 1808, 1812, 2211, 2220
Total 346

By dielectric, the 186 discs split into 63 SL (class I), 53 Y5P, 38 Y5U and 32 Y5V. That matters, because the class II dielectrics lose capacitance with temperature at different rates, and Y5V moves the most.

Which Walsin parts fit a 2.2 nF, Y2 300 Vac brief?

Four discs, plus four chips to check. We filtered the export to 2.2 nF and found 14 X1/Y2 parts, ten disc and four S2 chip; four discs fit a brief of 2.2 nF, Y2 300 Vac or more, Y5U dielectric: YU1AC222M070, YU1AC222M080, YU5AC222M080 and YU7AC222M080.

Put your incumbent part in the last column and compare each field.

Walsin part Form Rating Dielectric Match / mismatch with 2.2 nF, Y2 300 Vac or more, Y5U Your incumbent
YU1AC222M070 Small size disc X1 440 / Y2 300 Vac Y5U Match
YU1AC222M080 Standard disc X1 440 / Y2 300 Vac Y5U Match
YU5AC222M080 500 V small size disc X1 500 / Y2 500 Vac Y5U Match, more voltage margin
YU7AC222M080 Automotive disc X1 440 / Y2 300 Vac Y5U Match, automotive family
YU0AC222M070 Small size disc X1 440 / Y2 250 Vac Y5U Mismatch: Y2 rating below 300 Vac
YV1AC222M060 Standard disc X1 440 / Y2 300 Vac Y5V Mismatch: Y5V dielectric drifts more with temperature
S252B222K502 S2 chip, 2211 X1/Y2 X7R Check: surface-mount; confirm the Y2 voltage on the S2 datasheet

All ten discs in the 2.2 nF slice carry 20 percent tolerance and a minus 40 C to 125 C range. Confirm creepage, lead spacing and the certificate scope against both datasheets, and qualify in your own circuit.

Disc or surface-mount: which Y2 safety capacitor suits an Australian inverter?

It depends on the line and the board. A leaded disc is the familiar choice for a through-hole EMI filter and gives large creepage by its lead spacing; an S2 chip in 2211 or 2220 lets a fully reflowed board drop its last hand-inserted parts, and Walsin offers 160 of them.

We checked the S2 sizes in the export: 57 parts in 2211, 49 in 1808, 34 in 1812 and 20 in 2220. For a high-volume inverter assembled on an SMT line, removing through-hole parts saves a wave or selective-solder step. For a retrofit of an existing filter, the disc keeps the footprint. Our field-by-field note on Y capacitor safety selection: disc vs chip S2 compares the two. Either way, the safety certificate belongs to the exact part number, so a cross must be re-approved in your product file.

Which X1/Y2 capacitors are on the Hong Kong shelf?

Two S2 lines. Our stock snapshot dated 9 November 2026 holds two Walsin S2 surface-mount X1/Y2 lines on our shelf in Hong Kong, including S252B222K502 at 2.2 nF in 2211, which suits EMC trials before a production order.

The disc parts in the table are to order: request a quote and we source them through our authorised Walsin channel. The ready-stock list is a dated snapshot, not a live feed, and we make no stock, price or lead-time promise.

How Venatech helps: what should an inverter team in Australia send us?

The EMI-filter lines from your BOM. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, stating every field where the Walsin part differs from your original.

Paste a Y capacitor code into the cross-reference tool, or upload the whole BOM and request a quote through the site. Check the ready-stock snapshot, dated 9 November 2026. We work from Hong Kong, in small lots, with fast quotes that state availability, date code and lead time. Walsin is the line we are authorised for; Stackpole and Viking are lines we supply. We give no advice on Australian approvals or standards; confirm that with your own compliance team.

The short version

Australia installed 1,043 MWh of home and small business batteries in October 2026, ESS News reported on 10 November, and the federal program has passed 600,000 systems. Each one runs behind an inverter whose EMI filter needs a Y2 safety capacitor. Walsin covers X1/Y2 with 346 parts, 186 disc and 160 chip, and a 2.2 nF, Y2 300 Vac brief returns four disc matches, with one S2 chip line on our shelf in Hong Kong.

Send us your Y capacitor lines and we will return Walsin crosses with every difference stated. Is your next inverter revision moving its EMI filter to surface-mount?

Related reading

Last reviewed: 16 November 2026.

Sources

Fetched 16 November 2026.

  • ESS News, “Australia installs 1.04 GWh of home batteries in October”, 10 November 2026: https://www.ess-news.com/2026/11/10/australia-installs-1-04-gwh-of-home-batteries-in-october/
  • Walsin disc capacitor export, Venatech_DiscCap_Upload_01.xlsx, and MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 16 November 2026; Walsin datasheets 0AC_1AC_X1Y2_normal.pdf and WTC_MLCC_Safety_Certified_S2.pdf; Venatech Hong Kong stock snapshot dated 9 November 2026.

Frequently asked questions

How many home batteries did Australia install in October 2026?

ESS News reported on 10 November 2026, citing SunWiz, that Australia installed 1,043 MWh of small-scale battery storage in October, with an average system size of 26.74 kWh. The federal program has passed 600,000 systems.

What is a Y2 safety capacitor used for?

A Y2 capacitor connects an AC line to protective earth in an EMI filter. Because its failure could create a shock hazard, it must be a certified class Y part, rated for the line voltage.

How many X1/Y2 capacitors does Walsin offer?

We counted 346: 186 AC series disc capacitors and 160 S2 surface-mount MLCC, all classed X1/Y2. Venatech crosses and quotes them for inverter makers serving Australia.

Which Walsin part crosses a 2.2 nF X1/Y2 capacitor rated Y2 300 Vac?

YU1AC222M070, YU1AC222M080, YU5AC222M080 and YU7AC222M080 all meet 2.2 nF, Y2 300 Vac or more, in Y5U. Confirm creepage, lead spacing and certificate scope against both datasheets.

Can a surface-mount Y2 capacitor replace a disc in an Australian inverter?

Often, but it is a design change. Check the Y2 voltage, creepage on your board and the certificate, then re-approve the product. Walsin’s S2 series offers 160 surface-mount X1/Y2 parts.

Is Venatech an authorised Walsin distributor?

Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong and serves engineers in Australia in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!