NEWS

Anti-Sulfur Resistor Array for Security Cameras in Hangzhou, China: 2,772 Walsin SA Arrays

An anti-sulfur resistor array puts two or four sulfur resistant resistors in one chip, which suits the crowded processor and sensor boards of an outdoor camera. Walsin lists 2,772 SA arrays in four layouts, 2,284 of them at 1 percent. Venatech is the authorised Walsin distributor in Hong Kong, serving Hangzhou, China.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for hardware and purchasing teams building security cameras and video equipment in Hangzhou. Walsin Technology (Walsin) is the line we are authorised for. On 17 November 2026 we parsed all 79 of our chip resistor upload files, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx (234,378 distinct part numbers), isolated the anti-sulfuration array group and checked it against our ready stock snapshot dated 9 November 2026. Every part number below is real and every count is ours.

Why does Hangzhou matter for security camera electronics?

Because the volume is there. Hikvision, which dates its results from Hangzhou, reported on 27 April 2026 revenue of 92.51 billion yuan for 2025, with overseas main business at 29.42 percent of the total, and first-quarter 2026 revenue up 11.78 percent to 20.72 billion yuan.

Those are the company’s own figures from its results release, not ours, and we make no claim about whose parts it uses. They show the scale of video equipment designed in the city, and much of it ends up outdoors: on poles, gantries, building fronts and car parks, in coastal air, near traffic and near industry. An outdoor camera is a sealed box of fine-pitch electronics that has to keep working for years in whatever air surrounds it, and the passives on the image processor, memory and sensor interfaces are part of that reliability budget.

Why do outdoor cameras need a sulfur resistant chip resistor?

Because sulfur in the air attacks the silver in a standard chip resistor. Passive Components Blog, in an article updated 18 August 2026, explains that silver in an Ag or AgPd termination reacts with sulfur to form silver sulfide, raising resistance until the part goes open, and it lists road lighting and traffic control among the outdoor uses at risk.

The same article names the sources: air-polluted industrial areas, rubber seals, gaskets and grommets, oils and fossil fuels. A camera housing combines several of those, a rubber gasket round the lens window and an outdoor site near roads. The failure is slow and hard to see in-circuit, which is why the article notes it may only show when a part goes fully open. An anti-sulfuration construction protects the inner silver from that reaction. The article also describes the two test approaches the industry uses, the ASTM B809 flowers-of-sulfur test and the ANSI/EIA-977 method, so ask any supplier which one stands behind its claim. Our explainer on anti-sulfuration resistors, SF thin film and SA arrays covers Walsin’s families.

How many anti-sulfur resistor arrays does Walsin list?

2,772, split evenly across four layouts. We counted 2,772 Walsin anti-sulfuration array part numbers: 693 each in 0402 four-element, 0402 two-element, 0603 four-element and 0603 two-element convex packages, with 2,284 at 1 percent, 484 at 5 percent and 4 jumpers.

Walsin SA layout Parts Rated power per element TCR in the export Values
0402, 4 elements, convex 693 1/16 W 300 ppm or better 10 ohm to 1 megohm
0402, 2 elements, convex 693 1/16 W 300 ppm or better 10 ohm to 1 megohm
0603, 4 elements, convex 693 1/10 W 200 ppm or better 10 ohm to 1 megohm
0603, 2 elements, convex 693 1/10 W 200 ppm or better 10 ohm to 1 megohm

The four layouts carry the same value ladder: we found 572 distinct resistance values, jumpers included, across the group. That makes the SA family a like-for-like path from a standard array to a sulfur resistant one at the same layout. One array replaces four discrete resistors, which saves placements and board area on a camera main board. The chip resistor range lists every family; chip resistor arrays explained covers the layouts. We have not seen this split counted anywhere else.

Which Walsin SA array crosses a 33 ohm 0402 4-element array?

Two at the same layout, plus a 0603 step. For a 33 ohm, 0402, four-element array, a common series-termination value on camera data lines, we found SA04X330 JTL at 5 percent and SA04X33R0FTL at 1 percent; the 0603 four-element parts SA06X330 JTL and SA06X33R0FTL follow at 1/10 W.

Brief: 33 ohm, 0402, 4 elements Walsin part Tolerance TCR in the export Match / mismatch Your incumbent
Standard array on our shelf WA04X330 JTL 5 percent 200 ppm Mismatch: not anti-sulfuration
Anti-sulfur, same tolerance SA04X330 JTL 5 percent 300 ppm Match on layout and value; TCR wider
Anti-sulfur, tighter SA04X33R0FTL 1 percent 300 ppm Match, tighter tolerance
Anti-sulfur, two elements SA04Y330 JTL 5 percent 300 ppm Mismatch on element count
Anti-sulfur, larger body SA06X330 JTL 5 percent 200 ppm Mismatch on footprint: 0603

The TCR column is the one to check: in Walsin’s export the 0402 SA arrays are listed at 300 ppm or better, against 200 ppm for the standard 0402 WA array, so a precision divider may want the 0603 SA part instead. Note the space inside many Walsin array codes, as in SA04X330 JTL; keep it when you paste the code into a BOM. Compare pad layout and convex terminal form against Walsin’s ASC_SAxxX.pdf datasheet. For the case for and against arrays, see resistor arrays versus discrete resistors.

Which Walsin resistor arrays are on the Hong Kong shelf?

Three standard arrays. We checked all 2,772 SA arrays and the standard WA arrays against our snapshot of 9 November 2026: WA04X330 JTL at 33 ohm, WA04X300 JTL at 30 ohm and WA06X221 JTL at 220 ohm are on our shelf in Hong Kong (snapshot 9 Nov 2026).

Those three are standard thick film arrays, suited to indoor recorders and cameras where sulfur exposure is not a concern. For outdoor builds, request a quote for the SA twin and we source it through our authorised Walsin channel, confirming date code and lead time on each quote. The ready stock list is a dated snapshot. We give no stock or lead-time promise.

How Venatech helps: what can we cross for a Hangzhou camera board?

Every resistor and array, with the anti-sulfur option beside it. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch at /cross-reference/ decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and we quote small lots to Hangzhou from Hong Kong.

Paste your array and chip resistor lines into the cross-reference tool, or upload the whole camera BOM at /bom/, and request a quote through the site. Each result states what differs from your original: layout, tolerance, TCR and sulfur resistance. Hong Kong-based service keeps one contact for the Walsin lines and the rest of the passive list.

The short version

  • Hikvision reported 92.51 billion yuan of 2025 revenue and 11.78 percent first-quarter 2026 growth (results release dated Hangzhou, 27 April 2026).
  • Sulfur in outdoor and industrial air forms silver sulfide in standard resistors (Passive Components Blog, updated 18 August 2026).
  • Walsin lists 2,772 anti-sulfuration arrays: 693 in each of four layouts, 2,284 at 1 percent.
  • A 33 ohm 0402 four-element brief returns SA04X330 JTL and SA04X33R0FTL.
  • Three standard Walsin arrays are on our shelf in Hong Kong (snapshot 9 Nov 2026).

We will not call a part a drop-in match. We will show you where it differs. Which of your camera boards will live outdoors, and which stay inside?

Related reading

Last reviewed: 17 November 2026.

Sources

Fetched 17 November 2026.

  • Hikvision, 2025 full-year and 2026 first-quarter financial results, Hangzhou, 27 April 2026 (via AAP): https://www.aap.com.au/aapreleases/cision20260427ae44031/
  • Passive Components Blog, Sulphur resistant film resistors, updated 18 August 2026: https://passive-components.eu/sulphur-resistant-film-resistors/
  • Venatech chip resistor upload files Venatech_ChipR_Upload_01.xlsx to _79.xlsx, Walsin datasheets ASC_SAxxX.pdf and ASC_SAxxY.pdf, and ready stock snapshot dated 9 November 2026, re-measured 17 November 2026.

Frequently asked questions

What is an anti-sulfur resistor array?

It is a chip with two or four thick film resistors whose terminations are built to resist silver sulfide formation, so the array keeps its value in sulfur-bearing air.

Do outdoor security cameras need sulfur resistant chip resistors?

Often, when they sit near traffic, industry or rubber gaskets. The need depends on the site, the enclosure and your reliability target; confirm the test method with your reliability team.

How many anti-sulfur resistor arrays does Walsin make?

2,772 in our count of 17 November 2026: 693 each in 0402 and 0603, two-element and four-element layouts, from 10 ohm to 1 megohm.

Which Walsin part crosses a 33 ohm 0402 four-element array?

SA04X330 JTL at 5 percent or SA04X33R0FTL at 1 percent, both anti-sulfuration. Check TCR, which Walsin lists at 300 ppm for these 0402 parts, and pad layout.

Does Venatech stock Walsin resistor arrays in Hong Kong?

Three standard arrays are on our snapshot of 9 November 2026: WA04X330 JTL, WA04X300 JTL and WA06X221 JTL. SA anti-sulfur arrays are sourced on request through our authorised Walsin channel.

Can Venatech supply camera makers in Hangzhou, China?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to Hangzhou. Use the free cross-reference tool or upload a BOM; confirm import rules with your compliance team.


Share This, Choose Your Platform!