NEWS

Anti-Surge Chip Resistors for Industrial Control Boards in Tangier, Morocco: 68 Walsin 100-Ohm Surge Parts

An anti-surge chip resistor is built to absorb short high-energy pulses that would crack or drift a standard thick-film part. Walsin lists 17,180 surge-rated chip resistors, and 68 of them sit at 100 ohm, the common series value on protected I/O lines, from 0402 to 2512. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, the authorised Walsin distributor in Hong Kong, wrote this for industrial, power and data-centre hardware engineers and buyers in Tangier and the rest of Morocco. Walsin Technology (Walsin) is the line we are authorised for. On 17 November 2026 we parsed all 79 of our chip resistor upload files, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, and counted distinct part numbers in Walsin’s three surge-rated series groups by value, size, power and tolerance. Every part number below is real.

What is TE Connectivity doing with DIN rail production in Tangier?

Consolidating it there. Control Design reported on 6 May 2026 that TE Connectivity completed moving its DIN rail product line to its Tangier campus at the end of January, citing demand from data centres, and that the hub will support products for data centres, robotics, HVAC, megawatt charging and battery storage.

That is not the only non-vehicle line in the city. Bladi.net reported on 9 November 2026 that Fujikura adapted its Tangier plant, previously making automotive parts, to produce fibre-optic cable for data centres from August 2026, supplying Europe, the Middle East and Africa. Those are the publications’ figures, not ours, and we make no claim about what any named company buys. For a component buyer the signal is that Tangier is adding data-centre and industrial-control work, and the boards that go into DIN-rail cabinets and server rooms have to survive surges.

Where does an anti-surge chip resistor sit on an industrial control board?

In series with anything that leaves the box. On a 24 V digital input, an RS-485 line or a 4 to 20 mA loop, a 10 to 1,000 ohm resistor in series ahead of the TVS diode limits the surge current the protection has to clamp, and a standard thick-film chip at that position can crack or shift value under an IEC 61000-4-5 pulse.

Anti-surge parts are designed to spread pulse energy across the resistive element, so they hold their value through repeated hits. The same parts serve as inrush limiters, snubber resistors and gate resistors in DIN-rail power supplies and server power shelves. Whether a given size survives a given pulse is a datasheet question: Walsin publishes pulse curves per series. Our guide to anti-surge chip resistors explains the construction.

How many Walsin anti-surge chip resistors are there at 100 ohm?

  1. We counted 17,180 distinct Walsin surge-rated chip resistors in three groups, 8,340 in the commercial Anti-Surge series and 8,840 tagged AEC-Q200; 68 are at 100 ohm, 48 commercial and 20 AEC-Q200, from 0402 to 2512.
Walsin surge-rated resistors at 100 ohm 0402 0603 0805 1206 1210 2010 2512
Anti-Surge (WK and WF) none 6 9 9 6 9 9
Power Surge, AEC-Q200 (MK) none 3 3 none none none none
Triple Power Surge, AEC-Q200 (MF) 2 2 2 2 2 2 2

The commercial series runs from 1/10 W in 0603 to 1 W in 2512 at 100 ohm, and the Triple Power Surge series reaches 2 W in 2512. Across all three series our extract holds 731 distinct resistance steps. One surge-rated part, MF12E2200FTL at 220 ohm in 1206, is on our shelf in Hong Kong (snapshot 9 Nov 2026); the 100 ohm parts are to order through our authorised Walsin channel.

Which Walsin part crosses a 100 ohm, 0603, quarter-watt surge brief?

One commercial part matches directly, and three AEC-Q200 parts match with differences. For 100 ohm, 5 percent, 0603 and at least 1/4 W, WK06S101 JTL matches in the commercial Anti-Surge series; MK06S101 JTL and MF06E101 JTL match in the AEC-Q200 series, the latter at 1/3 W.

Brief: 100 ohm, 5%, 0603, 1/4 W or more, surge-rated Walsin part Power TCR Match / mismatch Your incumbent
Direct fit WK06S101 JTL 1/4 W 100 ppm Match
AEC-Q200 tagged MK06S101 JTL 1/4 W 100 ppm Match, Power Surge series
More power MF06E101 JTL 1/3 W 200 ppm Match on power; wider TCR
Tighter tolerance MK06S1000FTL 1/4 W 100 ppm Match, 1 percent
Lower power WF06S101 JTL 1/10 W 100 ppm Mismatch in power
Looser tolerance WK06S101 KTL 1/4 W 100 ppm Mismatch in tolerance (10 percent)

Leave the last column for your current part. Power rating is not pulse rating: two parts at 1/4 W can differ several-fold in the surge they survive, so read the pulse curve, not just the wattage. Note the space inside Walsin’s part number, as in WK06S101 JTL; keep it when you paste the number into a BOM. Our guide to chip resistor power rating by case size covers the steady-state side.

What separates Walsin’s WK, WF, MK and MF surge resistors?

Power per size and qualification. At 100 ohm in 0603, Walsin’s WF part is rated 1/10 W, the WK and MK parts 1/4 W and the MF part 1/3 W; WK and WF are commercial, while MK and MF carry the AEC-Q200 tag in our export.

For a DIN-rail I/O module or a server power board, the commercial WK series usually covers it, and its 0805 and 1206 parts step up to 1/4 W and 1/3 W at 100 ohm. If a customer asks for AEC-Q200 as a stress baseline, or one board design serves both industrial and vehicle markets, MK and MF give the same values with the tag. Our explainer on what AEC-Q200 actually certifies says what the tag covers, and the chip resistor range page lists every Walsin series.

How Venatech helps: what can we supply to a Tangier electronics team?

The surge resistors and the rest of the board’s passives, crossed in one pass. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, including the 17,180 Walsin surge-rated chip resistors counted here.

Paste your current resistor part numbers into the cross-reference tool, upload the board BOM at /bom/, or check the dated ready stock list. We serve Morocco from Hong Kong in small lots, which suits prototypes and second-source approval builds, and we quote fast. We confirm availability, date code and lead time on each quote and promise none in advance. Surge testing and qualification stay with you, and import questions go to your compliance team.

The short version

  • TE Connectivity consolidated its DIN rail product line in Tangier at the end of January 2026, citing data-centre demand (Control Design, 6 May 2026).
  • Walsin lists 17,180 surge-rated chip resistors; 68 are at 100 ohm, 48 commercial and 20 AEC-Q200.
  • For 100 ohm, 5 percent, 0603, 1/4 W, WK06S101 JTL matches, with MK06S101 JTL as the AEC-Q200 option.
  • Wattage is not pulse rating: check Walsin’s pulse curves for each size.

Send us the series and input-protection resistors from your control or power board and we will return the Walsin crosses with every difference stated. Which IEC 61000-4-5 level does your product have to pass?

Related reading

Last reviewed: 17 November 2026.

Sources

Fetched 17 November 2026.

  • Control Design, TE Connectivity centralizes DIN rail product line operations in Tangier, Morocco, 6 May 2026: https://www.controldesign.com/industry-news/news/55375727/te-connectivity-centralizes-din-rail-product-line-operations-in-tangier-morocco
  • Bladi.net, Fujikura’s Tangier plant moves into data-centre cables, 9 November 2026: https://www.bladi.net/fabriquait-automobile-tanger-usine-japonaise-lance-cables-centres-donnees,124880.html
  • Venatech chip resistor upload files Venatech_ChipR_Upload_01.xlsx to _79.xlsx and the Walsin datasheets linked in them, re-measured 17 November 2026; Venatech ready stock snapshot dated 9 November 2026.

Frequently asked questions

How many anti-surge chip resistors does Walsin make?

17,180 surge-rated chip resistors in our count of 17 November 2026: 8,340 in the commercial Anti-Surge series and 8,840 in the AEC-Q200 Power Surge and Triple Power Surge series, from 0402 to 2512.

Which Walsin part is a 100 ohm, 0603 anti-surge resistor?

WK06S101 JTL at 5 percent and 1/4 W in the commercial series, or MK06S101 JTL with the AEC-Q200 tag. Keep the space in the part number when you paste it into a BOM.

Is an anti-surge resistor needed on a 24 V industrial input?

Often, where the input must pass an IEC 61000-4-5 surge test. A series resistor ahead of the TVS limits clamp current, and a surge-rated part holds its value through repeated pulses. Check Walsin’s pulse curves.

Do Walsin anti-surge resistors come in AEC-Q200 versions?

Yes. The MK Power Surge and MF Triple Power Surge series carry the AEC-Q200 tag in our export; at 100 ohm there are 20 such parts from 0402 to 2512.

Can Venatech supply surge resistors to Tangier, Morocco?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to Morocco through our authorised Walsin channel. Confirm import rules with your compliance team.

Can Venatech cross my current surge resistor to Walsin?

Paste the part number into our free cross-reference tool or upload the BOM. We return the Walsin match and state every difference in power, tolerance and TCR; pulse qualification stays with you.


Share This, Choose Your Platform!