Turkey set a target of 175 GW of wind and solar by 2040 on 5 November 2026, and Aselsan is now fitting its own PULSAR inverters to its solar plants. Inverters measure string voltage through high voltage chip resistors, and Walsin Technology (Walsin) lists 3,004 with UL safety certification. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for power-electronics engineers, and the buyers who support them, at solar inverter, storage and power-conversion makers and EMS lines in Turkey. A national energy target and a company’s solar plants are business facts, not component orders, and we make no claim about any maker’s suppliers or design. What they do mean is more inverters to design and build in Turkey, and every grid-tied inverter carries a chain of high voltage resistors that measures and discharges its DC side. On 18 November 2026 we re-measured Walsin’s chip resistor export (Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_11.xlsx, 234,378 rows) for its high voltage families.
What did Turkey announce for wind and solar in November 2026?
A fourfold build-out. Turkish Minute reported on 5 November 2026 that Energy Minister Alparslan Bayraktar set a target of 175 GW of combined wind and solar capacity by 2040, up from about 44 GW to 45 GW today, with investment of about 100 billion US dollars.
The same “National Energy 2040” strategy, the report says, aims for 281 GW of total generating capacity by 2040, up from 123 GW in 2025, with renewables at 77 percent of installed capacity. On 9 November 2026, Now.Solar, citing Türkiye Today, reported that defence company Aselsan had commissioned two solar plants to cover the energy used in its production, and that it is using its own PULSAR inverters, whose design and software it owns, in solar projects for the first time. None of this tells us which components any inverter uses, and we do not suggest it does.
Why does a solar inverter need a high voltage chip resistor?
To sense and discharge the DC side safely. A string inverter sees DC input voltages up to 1,000 V or 1,500 V, and it measures that voltage, monitors insulation and bleeds down its DC-link capacitors through chains of high-value resistors, often 1 MΩ to 10 MΩ per element.
A standard chip resistor is rated for a limited working voltage per element, so a divider at 1,500 V needs either many standard parts in series or fewer high voltage parts with a higher rating per element. That changes the parts count, the creepage on the board and the reliability case. For an inverter that will carry a safety approval, a resistor range with its own UL certification also shortens the documentation. Our guide to high voltage chip resistors and the limit nobody checks explains why working voltage, not power, usually sets the design, and passives for a solar string inverter walks through the rest of the board.
How many Walsin high voltage chip resistors carry UL safety certification?
Three thousand and four. We parsed all 234,378 rows of Walsin’s chip resistor export and counted 20,244 distinct high voltage part numbers, 3,004 of them in the UL safety-certified families: 1,502 standard and 1,502 automotive, from 100 kΩ to 100 MΩ.
| UL-certified high voltage family, by case | Part numbers | Rated power |
|---|---|---|
| 0603 | 572 | 0.1 W |
| 0805 | 572 | 0.125 W |
| 1206 | 620 | 0.25 W |
| 2010 | 620 | 0.5 W |
| 2512 | 620 | 1 W |
| Total | 3,004 | 253 resistance values, ±1 % and ±5 % |
The automotive half mirrors the standard half, part number for part number, with a J suffix: WF12N1004FTL and WF12N1004FTLJ, for example. Of the 3,004, 2,338 are ±1 % and 666 are ±5 %. Check the datasheet for the maximum working voltage and overload voltage of each case; the export gives value, tolerance, TCR and power, and the datasheet gives the voltage ratings and the UL file details. The chip resistor range page links the Walsin datasheets.
Which 1 megohm resistor fits a 1206 high-voltage divider chain?
WF12N1004FTL, or its automotive twin. For a 1 MΩ, ±1 % element in a 1206 footprint with UL certification, Walsin’s WF12N1004FTL fits, rated 0.25 W and TCR ±100 ppm/°C; WF12N1004FTLJ is the automotive version.
This is a worked example, not a design rule. The match column assumes a 1 MΩ, ±1 %, 1206 brief in a UL-certified high voltage family, with the number of elements set by the datasheet working voltage and your safety standard.
| Walsin part | Case | Tolerance | TCR | Power | Match / mismatch for the example brief | Your incumbent |
|---|---|---|---|---|---|---|
WF12N1004FTL |
1206 | ±1 % | ±100 ppm/°C | 0.25 W | Match | |
WF12N1004FTLJ |
1206 | ±1 % | ±100 ppm/°C | 0.25 W | Match, automotive version | |
WF12N105 JTL |
1206 | ±5 % | ±200 ppm/°C | 0.25 W | Mismatch on tolerance and TCR | |
WF20N1004FTL |
2010 | ±1 % | ±100 ppm/°C | 0.5 W | Mismatch on footprint; fewer elements may be needed | |
WF08N1004FTL |
0805 | ±1 % | ±100 ppm/°C | 0.125 W | Mismatch on footprint; more elements likely | |
WR08X1004FTL |
0805 | ±1 % | see datasheet | 0.125 W | Mismatch: general-purpose series, not high voltage; on our shelf |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
Put your incumbent part in the last column, compare both datasheets, and check creepage and clearance against the standard your inverter is approved to. Two resistors with the same value and size can carry very different voltage ratings.
Which high-ohm resistors are on the shelf in Hong Kong?
Twenty-six lines at 100 kΩ or more. We checked our ready-stock snapshot dated 9 November 2026: 26 chip resistor part numbers at 100 kΩ or more are on our shelf in Hong Kong, and 15 of them have a UL-certified high voltage twin with the same size, value and tolerance.
The shelf lines are general-purpose parts, such as WR08X1004FTL (1 MΩ, 0805) and WR12X1003FTL (100 kΩ, 1206), whose twins are WF08N1004FTL and WF12N1003FTL. Use them for bench and prototype work where your process allows. The 3,004 UL-certified high voltage parts are supplied to order: request a quote and we source them through our authorised Walsin channel. On our shelf in Hong Kong (snapshot 9 November 2026) means held on that date, not a promise of quantity or date code today; we confirm availability, date code and lead time on each quote.
How Venatech helps
How Venatech helps is a checked cross before the build. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so an inverter’s resistor list returns Walsin candidates with size, tolerance and family differences stated.
Paste your resistor part numbers into the cross-reference tool, or upload the inverter BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve buyers in Turkey in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply. For safety approvals and import rules, confirm with your compliance team.
The short version
Turkey set a 175 GW wind and solar target for 2040 on 5 November 2026, and Aselsan is fitting its own PULSAR inverters to its new solar plants. Inverters sense and discharge their DC side through high voltage resistor chains. Walsin lists 20,244 high voltage chip resistors, 3,004 with UL safety certification; for a 1 MΩ ±1 % element in 1206, WF12N1004FTL fits.
Send us the resistor chain from your inverter’s DC side, and we will return Walsin crosses with every difference stated. How many elements does your 1,500 V divider use today?
Related reading
- High voltage chip resistors and the limit nobody checks
- Passives for a solar string inverter
- Solar inverter passive components in Spain: the temperature gate
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 18 November 2026
Sources
Fetched 18 November 2026.
- Turkish Minute, “Turkey sets 100 bln wind and solar expansion target for 2040”, 5 November 2026: https://www.turkishminute.com/2026/11/05/turkey-sets-100-bln-wind-and-solar-expansion-target-for-2040/
- Now.Solar (from Türkiye Today), “Turkish defense giant Aselsan to run entirely on solar power with two new plants”, 9 November 2026: https://now.solar/2026/11/09/turkish-defense-giant-aselsan-to-run-entirely-on-solar-power-with-two-new-plants-turkiye-today/
- Walsin chip resistor export, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_11.xlsx, re-measured 18 November 2026; Venatech ready-stock snapshot dated 9 November 2026.
Frequently asked questions
What is Turkey’s wind and solar target for 2040?
Turkish Minute reported on 5 November 2026 that the target is 175 GW of combined wind and solar by 2040, up from about 44 GW to 45 GW, with about 100 billion US dollars of investment.
What is a high voltage chip resistor used for in a solar inverter?
Mainly for DC-input voltage sensing, insulation monitoring and bleeding down DC-link capacitors, where chains of high-value elements see up to 1,000 V or 1,500 V.
How many UL-certified high voltage resistors does Walsin list?
We counted 3,004 distinct part numbers in Walsin’s UL safety-certified high voltage families, 1,502 standard and 1,502 automotive, from 0603 to 2512 and 100 kΩ to 100 MΩ.
Can I use a standard 1 MΩ chip resistor in a 1,500 V divider?
Only with enough elements in series to stay within each part’s working voltage, which the datasheet states. A high voltage family usually needs fewer elements. Check creepage against your safety standard.
Which high voltage resistors can buyers in Turkey get from Hong Kong?
All 3,004 UL-certified parts can be quoted to order through our authorised Walsin channel, and 15 general-purpose shelf lines in Hong Kong (snapshot 9 November 2026) have a UL-certified twin.
Is Venatech an authorised Walsin distributor for buyers in Turkey?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Turkey in small lots. Stackpole and Viking are lines we supply, not authorised lines.