Tesla’s Giga Berlin plant director said on 11 November 2026 that full battery cell production at Grünheide is targeted for mid-2027, with 18 GWh a year planned. Packs built from those cells need passive balancing, and Walsin Technology (Walsin) lists 69 AEC-Q200 resistors at 68 Ω and 0.5 W or more. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for battery-management and pack engineers, and the buyers who support them, at EV, battery-system, tier-1 and EMS makers in Germany. A cell-plant timeline is a business fact, not a component order, and we make no claim about Tesla’s suppliers, its BMS design or any bill of materials. What more European cell output does mean is more battery packs designed and built near the cells, and almost every pack’s BMS still uses resistors to bleed charge from its highest cells. On 18 November 2026 we re-measured Walsin’s chip resistor export (Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_11.xlsx, 234,378 rows) for AEC-Q200 parts at the common balancing values.
What did Tesla say about battery cells at Giga Berlin?
Full cell production by mid-2027. TeslaNorth reported on 12 November 2026 that Giga Berlin plant director André Thierig told the Automobilwoche Kongress on 11 November that Tesla aims for full battery cell production at the plant by mid-2027.
Today, the report says, Berlin makes electrodes and ships them to Texas to be made into cells, then receives the cells back. The battery investment announced in May 2026 is about 250 million US dollars, with 18 GWh of planned annual capacity and more than 1,500 additional jobs, aimed at 4680 cells. Thierig put vehicle output at 7,500 Model Y a week, TeslaNorth wrote, and a second factory hall is proposed but not yet approved. These are planned figures, not current cell output, and we treat them that way.
Why does more cell production in Germany raise a cell balancing resistor question?
Because every series string drifts. Cells in a series pack never age identically, so a passive-balancing BMS switches a resistor across each high cell to bleed it down; at 4.2 V a 68 Ω resistor draws about 62 mA and dissipates about 0.26 W.
That arithmetic sets the part. The resistor has to carry its dissipation with margin at the board’s temperature, survive years of thermal cycling and, on a vehicle pack, carry AEC-Q200 qualification. A pack with 100 or more cells in series multiplies one balancing position into hundreds of identical resistors per vehicle, which is why buyers want a second source on that line before production. Our overview of passives for a battery management system covers the other positions, and the note on Walsin automotive chip resistors MR, SR and the AEC-Q200 split explains how Walsin labels its automotive families.
How many Walsin AEC-Q200 resistors sit at 68 Ω and 0.5 W or more?
Sixty-nine. We parsed all 234,378 rows of Walsin’s chip resistor export, found 102,850 part numbers tagged AEC-Q200, and counted 69 distinct non-array parts at exactly 68 Ω rated 0.5 W or more, in six case sizes from 0805 to 2512.
| Case | Part numbers at 68 Ω, 0.5 W or more | Rated power range |
|---|---|---|
| 0805 | 4 | 0.5 W |
| 1206 | 8 | 0.5 W to 0.75 W |
| 1210 | 17 | 0.5 W to 0.75 W |
| 1218 | 2 | 1 W |
| 2010 | 19 | 0.5 W to 1.5 W |
| 2512 | 19 | 1 W to 3 W |
| Total | 69 |
By family, 26 are high-power thick film, 26 general-purpose automotive, 10 anti-surge, 6 high voltage and 1 high-precision part. The same count holds at 47, 51, 56, 75, 82 and 100 Ω, so moving your balancing value one step does not narrow the choice. Check the datasheet for each family’s derating curve; the export gives rated power at its reference temperature, and the datasheet gives the curve that sets the real margin on a warm BMS board. The chip resistor range page links them.
Which 68 Ω cell balancing resistor fits a 2512 or 2010 footprint?
Several, by power. For a 68 Ω, ±1 % balancing resistor at 0.26 W with at least two times power margin, Walsin’s MR25X68R0FTL in 2512 at 1 W and WF20P68R0FTLJ in 2010 at 1 W both fit; anti-sulfur SR25X68R0FTL suits packs exposed to sulphur.
This is a worked example, not a design rule. The match column assumes a 68 Ω, ±1 %, AEC-Q200 brief dissipating 0.26 W, with power rated at least 0.5 W.
| Walsin part | Case | Family | Power | TCR | Match / mismatch for the example brief | Your incumbent |
|---|---|---|---|---|---|---|
MR25X68R0FTL |
2512 | General purpose (automotive) | 1 W | ±100 ppm/°C | Match | |
WF20P68R0FTLJ |
2010 | High power (automotive) | 1 W | ±100 ppm/°C | Match, smaller footprint | |
SR25X68R0FTL |
2512 | Anti-sulfuration (automotive) | 1 W | ±100 ppm/°C | Match, sulphur-resistant | |
WF12A68R0FTLJ |
1206 | High power (automotive) | 0.75 W | ±100 ppm/°C | Match on power; check board temperature | |
MF12P68R0FTL |
1206 | High power (automotive) | 0.5 W | ±100 ppm/°C | Match at the margin limit | |
WR12X68R1FTL |
1206 | General purpose | 0.25 W | see datasheet | Mismatch: 68.1 Ω, 0.25 W and no AEC-Q200 tag; on our shelf |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
Put your incumbent part in the last column, compare both datasheets, and check the derating curve at your worst-case board temperature. Balancing resistors often sit side by side, so the heat of the whole row, not one part, sets the real margin.
Which balancing resistors are on the shelf in Hong Kong?
One close neighbour. We checked all 69 AEC-Q200 parts at 68 Ω and 0.5 W or more against our ready-stock snapshot dated 9 November 2026; they are supplied to order, and the nearest shelf line is WR12X68R1FTL, a 68.1 Ω general-purpose 1206.
That shelf part is fine for bench work on a balancing circuit but is not a production BMS part, because it lacks the power and the AEC-Q200 tag. For the 69, request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote. On our shelf in Hong Kong (snapshot 9 November 2026) means held on that date; it is not a promise of quantity or date code today.
How Venatech helps
How Venatech helps is a checked cross before the next pack build. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a BMS resistor list returns Walsin candidates with power, size and AEC-Q200 differences stated.
Paste your resistor part numbers into the cross-reference tool, or upload the BMS BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve buyers in Germany in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply. For the EU battery rules that apply to your packs, confirm with your compliance team.
The short version
Tesla’s Giga Berlin plant director said on 11 November 2026 that full cell production at Grünheide is targeted for mid-2027, with 18 GWh a year planned. Packs need passive balancing, and at 4.2 V a 68 Ω resistor dissipates about 0.26 W. Walsin lists 69 AEC-Q200 resistors at 68 Ω and 0.5 W or more, from MF08E68R0FTL in 0805 to MR25X68R0FTL in 2512.
Send us the balancing resistor from your current BMS, and we will return Walsin AEC-Q200 crosses with power and size stated. What does your balancing resistor dissipate at full bleed today?
Related reading
- Passives for a battery management system
- Walsin automotive chip resistors: MR, SR and the AEC-Q200 split
- AEC-Q200 qualification report: three documents for a German tier-1
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 18 November 2026
Sources
Fetched 18 November 2026.
- TeslaNorth, “Tesla Giga Berlin battery cell production targeted for mid-2027”, 12 November 2026: https://teslanorth.com/2026/11/12/tesla-giga-berlin-battery-cell-production-mid-2027/
- Walsin chip resistor export, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_11.xlsx, re-measured 18 November 2026; Venatech ready-stock snapshot dated 9 November 2026.
Frequently asked questions
When will Tesla make battery cells at Giga Berlin?
TeslaNorth reported on 12 November 2026 that the plant director targets full cell production in Grünheide by mid-2027, with 18 GWh of planned annual capacity. These are planned figures.
What value should a cell balancing resistor be?
It depends on the bleed current you want. At 4.2 V, 68 Ω gives about 62 mA and 0.26 W; 47 Ω or 33 Ω bleed faster and dissipate more. Choose power rating with margin at board temperature.
How many Walsin AEC-Q200 resistors are rated for passive balancing at 68 Ω?
We counted 69 distinct AEC-Q200 non-array parts at 68 Ω rated 0.5 W or more, from 0805 to 2512. The same count holds at 47 Ω to 100 Ω.
Is a 0.25 W 1206 resistor enough for passive cell balancing?
At 0.26 W of dissipation, no. Choose a part rated 0.5 W or more and check the derating curve at the BMS board’s worst-case temperature.
Can buyers in Germany get AEC-Q200 balancing resistors from Hong Kong?
Yes, to order through our authorised Walsin channel, in small lots. We confirm availability, date code and lead time on each quote.
Is Venatech an authorised Walsin distributor for buyers in Germany?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Germany in small lots. Stackpole and Viking are lines we supply, not authorised lines.