0201 Inductor Choices for Smart Ring Electronics in China (Shenzhen): Ninenovo Plans 1.2 Million Rings a Year, and 86 of 888 Walsin 0201 Inductors Self-Resonate Below 2.45 GHz

For a 0201 inductor in a Shenzhen smart ring’s 2.4 GHz radio, value decides whether the part is an inductor at all: 86 of the 888 Walsin Technology (Walsin) 0201 inductors list a minimum self-resonant frequency below 2,450 MHz, every one of them 15 nH or more. A 2.2 nH matching brief returns 17 part numbers in 3 data sets.

---

Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for an RF or hardware engineer in Shenzhen, China, who is laying out the Bluetooth Low Energy matching network of a ring, band or earbud and has room for nothing larger than an 0201. We parsed the Walsin inductor export, Walsin_Inductor_ALL.xlsx (5,411 rows, 5,410 real parts after one test row), and our stock list as at 23 September 2026. Every part number is real. The market statement names its source and the day we fetched it, 11 November 2026.

What did China Daily report about smart ring production in Shenzhen?

A new production base in Nanshan. According to China Daily on 2 November 2026, Shenzhen Ninenovo Technology, maker of the RingConn smart ring, plans new production lines and R&D in Shenzhen’s Nanshan district from the first quarter of next year, with possible annual capacity of 1.2 million units, against 500,000 a year at its Dongguan base.

The same report says the RingConn brand has 1 million users in more than 190 countries and regions. Those are the paper’s figures, not ours. The conclusion we draw is ours: a ring has the tightest board in consumer electronics, and its radio matching parts land in 0201 or smaller. We have no relationship with Ninenovo and say nothing about what it buys.

Which 0201 inductor values stop working at 2.4 GHz?

Everything from 15 nH up is at risk. We read the minimum SRF column of Walsin_Inductor_ALL.xlsx for all 888 Walsin 0201 inductors (WLCM 367, MCI 349, MCI-TM 172): 86 list a minimum below 2,450 MHz, the top of the 2.4 GHz band, and the lowest value among them is 15 nH; 669 list 5,000 MHz or more.

Above its self-resonant frequency an inductor behaves as a capacitor. So for a BLE matching network, a 22 nH 0201 such as WLCM0603Z0H22NTB (minimum SRF 2,000 MHz in the export) is the wrong tool, however good its Q looks on paper. Small values are safe: the 2.2 nH rows list 10,000 to 12,000 MHz. Our guide to inductor self-resonant frequency explains why the margin matters, and we have not seen the 86 counted anywhere.

Which Walsin 0201 inductors cross a 2.2 nH, plus or minus 0.1 nH, Q 12 brief?

Five match on every export field. We filtered the 0201 rows to 2.2 nH and found 17 part numbers; 7 are plus or minus 0.1 nH, and 5 of those list Q 12 or more, the brief we set for a BLE pi-match.

The table shows the five plus two near misses. Your incumbent goes in the last column.

Walsin part	Series	Tol.	Q min	SRF min (MHz)	RDC	Rated current	Match / mismatch with the brief	Your incumbent
WLCM0603TGB2N2TB	WLCM	0.1 nH	12	12,000	0.22 ohm	450 mA	Match
MCI0603TG2N2BHBP	MCI	0.1 nH	12	12,000	0.22 ohm	450 mA	Match, same data as the WLCM row above
WLCM0603TNB2N2TB	WLCM	0.1 nH	14	11,000	0.15 ohm	600 mA	Match, higher Q, lower SRF
MCI0603TN2N2BHBP	MCI	0.1 nH	14	11,000	0.15 ohm	600 mA	Match, same data as the row above
MCI0603TM2N2BHBP	MCI-TM	0.1 nH	14	11,000	0.15 (no unit)	0.6 A	Match, same data printed in other units
WLCM0603Z0B2N2TB	WLCM	0.1 nH	4	10,000	0.22 ohm	450 mA	Mismatch: Q 4 is below the brief
WLCM0603TNC2N2TB	WLCM	0.2 nH	14	11,000	0.15 ohm	600 mA	Mismatch: tolerance is wider

All are 0.3 mm thick in the export. A match here is a match on export fields, no more. Confirm against both datasheets and qualify in your own circuit, because Q is quoted at a test frequency the export does not state. Our guide to inductors for RF matching networks covers the layout side.

Why do 17 part numbers at 2.2 nH collapse to 3 data sets?

Because the series repeat each other. We grouped the 17 rows at 2.2 nH by Q, SRF, RDC and current: they form 3 electrical profiles, Q 4 at 10,000 MHz, Q 12 at 12,000 MHz and Q 14 at 11,000 MHz, each printed in up to three series.

Across the whole 0201 file, 349 of the 367 WLCM rows have an MCI or MCI-TM row with the same inductance, tolerance, Q, SRF, resistance and current; the wider 430-data-set finding is ours and already published. The practical effect for a Shenzhen buyer is a second source inside one maker: two part numbers with the same data, either of which you can list on the drawing. The 172 MCI-TM rows also print resistance without an ohm sign and current in amperes, so a BOM tool that sorts on text will mis-order them. We counted that ourselves.

What does the Hong Kong shelf hold in 0201 inductors?

None. Of the 1,125 distinct part numbers on our stock list as at 23 September 2026, 0 are among the 888 Walsin 0201 inductors, and only 2 are among the 5,410 inductors in the whole range.

Every part in this post is therefore a to-order enquiry against the stock list as at 23 September 2026. The ready-stock list is a dated snapshot, never live-synced, and the inductor range lists the families. We give no lead time and no stock promise.

What will we not tell you about smart ring design in China?

Anything about your antenna, your enclosure or your certification. Our count covers catalogue coverage only: 888 part numbers, 86 below 2,450 MHz, 0 on the shelf; none of it says a part suits your ring.

The finger, the battery and a metal shell all detune a ring’s antenna, and the matching values come from your own network analyser, not from us. We hold no office or entity in mainland China outside Shenzhen, where we have a location; our other locations are Hong Kong, Singapore and Jiangmen, with Chengdu in preparation. We hold no ISO 9001 or IATF 16949 certificate and give no legal, customs or radio-approval advice; confirm with your compliance team.

How can Venatech help a Shenzhen wearables maker?

How Venatech helps starts with a free paste box. Venatech Limited is a Hong Kong-based authorised Walsin distributor, and our VenaMatch tool decodes 18 manufacturers’ part numbers and covers 800,000+ crossable parts, with each field marked match or mismatch.

Paste up to 500 part numbers into the cross-reference tool, or load a whole BOM. The ready-stock list is a Hong Kong snapshot dated 23 September 2026. Worked example from our own export: the 2.2 nH, plus or minus 0.1 nH, Q 12 brief returned 5 matches in 3 series and 2 data sets, none stocked. Walsin is the only line we are authorised for; Stackpole and Viking are lines we supply. We serve from Hong Kong in small lots, we help cross-reference, and you request a quote through the site.

The short version

For a Shenzhen smart ring, an 0201 inductor in the 2.4 GHz path is safe at a few nanohenries and risky from 15 nH up: 86 of 888 Walsin 0201 parts resonate below 2,450 MHz. At 2.2 nH, 17 part numbers reduce to 3 data sets, and same-data pairs give you a second source inside one maker.

Send us the matching-network lines from your BOM with the value, tolerance and Q you need, and we will return the Walsin parts with every difference stated. Is any inductor in your 2.4 GHz path 15 nH or more?

Related reading

• Inductor self-resonant frequency
• Inductors for RF matching networks
• The smallest Walsin inductors: 0201 and 0402
• Free cross-reference tool and ready-stock snapshot

Last reviewed 11 Nov 2026.

Sources

Fetched 11 November 2026.

• China Daily (Hong Kong edition), “Wearable devices becoming smaller, more intelligent”, 2 November 2026: https://www.chinadailyhk.com/article/642099

---

Frequently asked questions

---