NEWS

Low Profile MLCC for Data Centre Storage Electronics in the Philippines: Toshiba Plans a Hard Disk Expansion, and 50 of 56 Walsin Low Profile Parts Have a Standard Twin That Is Thicker

A Philippine government statement of 25 October 2026 cited Toshiba’s planned three-year expansion of high-capacity hard disk drive output for data centres. Height-limited storage boards often need a low profile MLCC. Walsin lists 56 low profile parts; 50 have a standard twin that is thicker, by up to 1.65 mm, and none was on our shelf.

Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for a design, process or sourcing engineer at a Philippine storage-drive, EMS or electronics-assembly plant in Laguna, Batangas, Cavite, Cebu or Clark. Walsin Technology (Walsin) is the only line we are authorised for. The Walsin side is our own MLCC export file, 00_ALL_MLCC_parts_combined.xlsx, 24,026 rows and 23,601 distinct part numbers, re-measured on 11 November 2026. Every part number below is real and appears in that export.

What did the Philippine government report about electronics exports and Toshiba on 25 October 2026?

Record exports and a storage expansion. SunStar reported on 25 October 2026 that Philippine merchandise exports reached a record 64 billion US dollars in January to August 2026, electronics exports rose 26.2 percent to 37.1 billion US dollars, and Toshiba plans a multi-billion-peso, three-year expansion of high-capacity hard disk drive production for data centres, creating about 3,000 jobs.

The SunStar report, which we read on 11 November 2026, quotes Executive Secretary Ralph Recto, chair of the Semiconductor and Electronics Industry Advisory Council, and notes that SEIPI raised its 2026 electronics export growth forecast to 10 percent, about 54 billion US dollars. The Daily Tribune carried the same figures the same day. These are the government’s and SEIPI’s statements, not ours. We have no relationship with Toshiba and say nothing about what it buys.

Why does a storage or thin-module board care about MLCC height?

Because height is a mechanical constraint the schematic never shows. A capacitor’s value, voltage and dielectric fit the circuit, but its thickness has to fit the enclosure, a shield can or the gap under another part; in Walsin’s export a standard 1206 at 47 µF is 1.60 mm nominal while its low profile twin is 0.85 mm.

Storage-drive electronics, thin modules and boards mounted against a housing are typical places where a designer specifies a maximum component height. The trouble is that two parts with identical electrical fields can differ by twice the height, and a bill of materials that lists only value, voltage and size will not catch it. Our post on passive component case sizes covers the footprint side.

What is in Walsin’s low profile MLCC series?

Fifty-six part numbers, almost all X5R. We counted 57 rows and 56 distinct part numbers in Walsin’s Low Profile (TT) series, since TT31X106K100 appears twice; 51 are X5R and 5 are X7R, in 0402 (4), 0603 (2), 0805 (26), 1206 (21) and 1210 (3).

By nominal thickness in Walsin’s published export, 4 parts are 0.30 mm (all 0402), 2 are 0.50 mm (0603), 45 are 0.85 mm, 3 are 1.15 mm and 1 is 2.50 mm. One row, TT31X335K250, has no thickness at all. The largest value is 47 µF, TT31X476M6R3, at 6.3 V in 1206. The widest gap we measured is in 1210: TT32X106K250 is 0.85 mm nominal against 2.50 mm for its standard twin 1210X106K250, a difference of 1.65 mm.

How many low profile parts have a thicker standard twin?

Fifty-two of 56. We matched every TT part against Walsin’s General Purpose series on size, dielectric, value, rated voltage and tolerance: 52 of the 56 have a General Purpose twin with identical electrical fields; in 50 of those 52 the twin is thicker, in 1 it is the same height, and 1 TT row has no thickness to compare.

Brief	Low profile part	Thickness	Standard twin	Twin thickness	Match / mismatch	Twin on our shelf
1 µF, 0402, 6.3 V, X5R	`TT15X105K6R3`	0.30 mm	`0402X105K6R3`	0.50 mm	Match on electrical fields; mismatch on height	Yes
1 µF, 0603, 16 V, X5R	`TT18X105K160`	0.50 mm	`0603X105K160`	0.80 mm	Match electrical; mismatch height	Yes
10 µF, 0805, 6.3 V, X5R	`TT21X106K6R3`	0.85 mm	`0805X106K6R3`	1.25 mm	Match electrical; mismatch height	Yes
47 µF, 1206, 6.3 V, X5R	`TT31X476M6R3`	0.85 mm	`1206X476M6R3`	1.60 mm	Match electrical; mismatch height	Yes
2.2 µF, 1210, 100 V, X7R	`TT32B225K101`	2.50 mm	`1210B225K101`	2.50 mm	Match on every field, height included	Yes

The last row is the finding we have not seen published: TT32B225K101 sits in the low profile series at the same 2.50 mm nominal thickness as its General Purpose twin. A buyer who filters on the series name alone would pick a “low profile” part that is no lower. We will not guess why; read the height field on Walsin’s datasheet, not the series label.

What does the Hong Kong shelf hold for a height-limited board?

No low profile parts, but 11 of their standard twins. We read the stock list as at 23 September 2026: none of its 1,125 part numbers is in the TT series, while 11 of the 52 General Purpose twins are on it, including 0402X105K6R3, 0805X106K6R3 and 1206X476M6R3.

The stock file we read is dated as at 23 September 2026 in its own second row. That means the shelf can serve a prototype where the standard height fits, and a TT part is a request through the site where it does not. The ready stock list is a dated snapshot, never live-synced, and we make no lead-time or availability promise. For mounting thin parts, see MLCC reflow profile and mounting.

How can Venatech help a Philippine storage or EMS team?

How Venatech helps starts with the free cross-reference tool, VenaMatch, which decodes 18 manufacturers’ part numbers, covers 800,000+ crossable parts, and has a low-profile filter among its special-requirement filters. Paste up to 500 part numbers or an Excel or CSV file, and each Walsin candidate comes back with every field marked match or mismatch. Upload a full BOM for review, and see the MLCC range.

We serve from Hong Kong and our Singapore location in small lots, and you request a quote through the site. We hold no office, entity or stock in the Philippines. We hold no ISO 9001 or IATF 16949 certificate and give no legal, customs or conformity advice. Qualification stays with you.

The short version

Philippine electronics exports rose 26.2 percent to 37.1 billion US dollars in January to August 2026, per SunStar on 25 October 2026, and Toshiba plans a hard disk expansion for data centres.
Walsin’s low profile TT series holds 56 part numbers, 51 of them X5R, from 0.30 to 2.50 mm thick.
52 have a General Purpose twin with identical electrical fields; 50 of those twins are thicker, 1 is the same height.
TT32B225K101 is no thinner than its twin.
No TT part, but 11 twins, were on our 23 September 2026 shelf.

Paste your height-limited parts into the free cross-reference tool, switch on the low-profile filter and read every field as match or mismatch. Qualification stays with you.

Frequently asked questions

What did the Philippines report about electronics exports in October 2026?

Per SunStar on 25 October 2026, merchandise exports hit a record 64 billion US dollars in January to August 2026 and electronics exports rose 26.2 percent to 37.1 billion US dollars. SEIPI raised its 2026 growth forecast to 10 percent.

What is a low profile MLCC?

A capacitor built thinner than the standard part of the same size and value. In Walsin’s TT series, 45 of 56 parts are 0.85 mm nominal, against 1.25 mm for a standard 0805 and 1.60 mm for many standard 1206 parts.

How many low profile MLCC does Walsin list?

We counted 56 distinct part numbers in Walsin’s Low Profile (TT) series, from 57 rows, re-measured on 11 November 2026: 51 X5R and 5 X7R, from 0402 to 1210, up to 47 microfarad.

Is every Walsin TT part thinner than its standard twin?

No. 52 of 56 have a General Purpose twin; in 50 the twin is thicker and one TT row has no thickness. TT32B225K101 is 2.50 mm nominal, the same as 1210B225K101. Check the height field, not the series name.

Are low profile parts on the Venatech shelf?

No TT part was in the stock list as at 23 September 2026. Eleven of their standard-height twins were, including 1206X476M6R3. Ask through the site for availability; we give no lead-time guarantee.

Does Venatech serve buyers in the Philippines?

Yes, from Hong Kong and our Singapore location, in small lots, with quotes requested through the site. We hold no office or stock in the Philippines and give no customs advice. Venatech is authorised for Walsin.