NEWS

AEC-Q200 High Voltage Resistors for San Luis Potosi, Mexico: 25 Walsin 1 Megohm Parts for EV Battery Builds

A high voltage resistor lets a battery management or isolation-monitoring circuit divide a pack voltage of several hundred volts down to something an ADC can read. Walsin lists 8,305 AEC-Q200 high voltage chip resistors, 25 of them at 1 megohm across five sizes from 0603 to 2512. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for BMS, power electronics and component engineers and buyers in San Luis Potosi, the wider Bajio and across Mexico, at battery, module and electronics suppliers. Walsin Technology (Walsin) is the line we are authorised for. We parsed all 79 chip resistor upload files, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, on 16 November 2026, kept the high voltage series tagged AEC-Q200 and counted distinct part numbers by size and value. Every part number below is real.

What is BMW building at San Luis Potosi?

A high-voltage battery assembly centre and production of its Neue Klasse electric cars. Electrive reported on 24 July 2026 that BMW is investing 800 million euros in its San Luis Potosi plant, more than 500 million euros of it in a battery assembly centre of over 80,000 square metres for sixth-generation packs, with the i3 and iX3 built there from 2027.

The report says the site will be one of five worldwide for these batteries and that the plant expansion covers more than 110,000 square metres, on schedule. Those are the publication’s figures, not ours. Battery assembly in San Luis Potosi brings battery management, contactor and high-voltage sensing electronics into the regional supply chain, and the suppliers who build and test those modules need high voltage passives with automotive documentation.

Where does a high voltage resistor sit in an EV battery pack?

In the dividers that measure pack and link voltage and in isolation-monitoring networks. A pack voltage of several hundred volts is divided by a string of high-value resistors, often around 1 megohm each, into a few volts for an ADC, and the same kind of string measures insulation resistance between the pack and the chassis.

Two limits decide the part. The first is working voltage: each resistor in the string must stay inside its rated voltage, so long strings spread the stress across several parts. The second is power and drift: high values keep the standing current and heat low, but a thick film resistor’s value can shift under sustained high field, which moves the reading. Chip size, creepage on the board and conformal coating all interact. Our guide to high voltage chip resistors and the limit nobody checks and the note on passives for a battery management system cover the method.

How many AEC-Q200 high voltage resistors does Walsin list?

8,305. We counted 8,305 Walsin high voltage chip resistors tagged AEC-Q200: 6,803 in the automotive WK high voltage series and 1,502 in the automotive version of the UL safety-certified WF series, spread across 0603, 0805, 1206, 2010 and 2512.

Size AEC-Q200 high voltage parts Of which at 1 megohm
0603 1,633 5
0805 1,650 5
1206 1,674 5
2010 1,674 5
2512 1,674 5

At 1 megohm each size carries five parts: three in WK (1, 2 and 5 percent) and two in WF (1 and 5 percent), so the 25 split into 10 at 1 percent, 5 at 2 percent and 10 at 5 percent. Across all values, 4,214 of the 8,305 are 1 percent. We have not seen the 1 megohm AEC-Q200 slice counted anywhere else.

What working voltage does each Walsin high voltage resistor size carry?

From 200 V in 0603 to 800 V in 2512, per Walsin’s WK datasheet. Walsin’s ASC_WKxxV datasheet, revision V07 of June 2024, lists maximum operating voltages of 200 V for 0603, 400 V for 0805, 500 V for 1206 and 2010, and 800 V for 2512, with overload ratings of twice those figures.

Size Max operating voltage Max overload voltage
0603 (WK06V) 200 V 400 V
0805 (WK08V) 400 V 800 V
1206 (WK12V) 500 V 1,000 V
2010 (WK20V) 500 V 1,000 V
2512 (WK25V) 800 V 1,600 V

So a divider that must withstand a few hundred volts can use one 2512 part or share the voltage across a string of 1206 parts, each kept well inside 500 V. The automotive J-suffix parts have their own datasheet, ASC_WKxxV_AUTO.pdf, and the UL WF parts ASC_WFxxN_J_AUTO.pdf, both named in the export.

Which Walsin parts cross a 1 megohm, 1206, 1 percent AEC-Q200 brief?

Two match, and four more miss on one field each. At 1 megohm, 1206, 1 percent and AEC-Q200, WK12V1004FTLJ and the UL-certified WF12N1004FTLJ match; the 2 percent part, the non-automotive part and other sizes do not.

Brief: 1 megohm, 1206, 1%, AEC-Q200, high voltage Walsin part Series Match / mismatch Your incumbent
Direct fit WK12V1004FTLJ WK automotive Match
With UL safety certification WF12N1004FTLJ WF UL automotive Match, adds UL listing
Looser tolerance WK12V1004GTLJ WK automotive Mismatch in tolerance (2 percent)
Industrial version WK12V1004FTL WK Mismatch: no AEC-Q200 tag
Higher voltage, larger body WK25V1004FTLJ WK automotive Mismatch in size (2512, 800 V)
Smaller body WK08V1004FTLJ WK automotive Mismatch in size (0805, 400 V)

Leave the last column for your current part and confirm both datasheets; our post on cross-referencing chip resistors to Walsin lists the fields to check. The chip resistor range shows every high voltage series.

How Venatech helps: what can we cross for a San Luis Potosi battery or module team?

The high voltage, sense and general-purpose resistors on the BOM, in one pass. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, including all 8,305 AEC-Q200 high voltage parts in this post.

The AEC-Q200 high voltage parts are to order: request a quote and we source them through our authorised Walsin channel. Paste your divider and isolation-monitor resistors into the cross-reference tool, upload the BOM at /bom/, or check the dated ready stock list for other lines. We serve Mexico from Hong Kong in small lots, which suits samples and pre-series builds ahead of a 2027 start, and we quote fast. We confirm availability, date code and lead time on each quote and promise none in advance; PPAP and qualification stay with you, and import questions with your compliance team.

The short version

  • BMW is investing 800 million euros at San Luis Potosi, more than 500 million of it in a high-voltage battery assembly centre, with i3 and iX3 production from 2027 (Electrive, 24 July 2026).
  • Walsin lists 8,305 AEC-Q200 high voltage chip resistors from 0603 to 2512.
  • 25 of them are 1 megohm, five per size; WK12V1004FTLJ and WF12N1004FTLJ match a 1206, 1 percent brief.
  • Walsin’s WK datasheet rates 1206 at 500 V and 2512 at 800 V maximum operating voltage.

Send us the divider and isolation-monitor resistors from your BMS or module board and we will return the Walsin AEC-Q200 crosses with every difference stated. What voltage does each resistor in your string see?

Related reading

Last reviewed: 16 November 2026.

Sources

Fetched 16 November 2026.

  • Electrive, Production of BMW i3 and iX3 in Mexico remains on track for 2027, 24 July 2026: https://www.electrive.com/2026/07/24/production-of-bmw-i3-and-ix3-in-mexico-remains-on-track-for-2027/
  • Walsin ASC_WKxxV datasheet, V07, June 2024 (Mouser copy): https://www.mouser.com/datasheet/3/317/1/ASC_WKxxV.pdf
  • Venatech chip resistor upload files Venatech_ChipR_Upload_01.xlsx to _79.xlsx, with ASC_WKxxV_AUTO.pdf and ASC_WFxxN_J_AUTO.pdf as linked in the export, re-measured 16 November 2026; Venatech ready stock snapshot dated 9 November 2026.

Frequently asked questions

How many AEC-Q200 high voltage resistors does Walsin make?

8,305 in our count of 16 November 2026: 6,803 in the automotive WK high voltage series and 1,502 in the automotive UL safety-certified WF series, from 0603 to 2512.

Which Walsin part is a 1 megohm, 1206, 1 percent AEC-Q200 high voltage resistor?

WK12V1004FTLJ, or WF12N1004FTLJ if you want the UL safety-certified series. Confirm voltage rating and footprint against both datasheets.

What is the maximum working voltage of a Walsin 1206 high voltage resistor?

500 V maximum operating and 1,000 V overload for WK12V in Walsin’s WKxxV datasheet, V07 of June 2024. Check the automotive datasheet for the J-suffix parts.

How do you build a high voltage divider for an EV battery?

Use a string of high-value resistors so each part stays well inside its rated voltage, add creepage on the board, and qualify drift under sustained voltage in your own design.

Does Venatech stock AEC-Q200 high voltage resistors for Mexico?

We hold stock in Hong Kong. The AEC-Q200 high voltage parts are quoted through our authorised Walsin channel; see the dated ready stock list for lines on our shelf.

Can Venatech supply EV battery suppliers in San Luis Potosi, Mexico?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to Mexico. Use the cross-reference tool or upload a BOM; confirm import rules with your compliance team.


Share This, Choose Your Platform!