A 0201 RF capacitor is a 0.6 by 0.3 mm C0G chip used for matching, DC blocking and peaking on high-speed and optical-module boards. Walsin’s UF ultra microwave series lists 206 parts in 0201, from 0.05 pF to 10 pF, 38 of them held to 0.03 pF or tighter. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for RF and photonics engineers and buyers in Dong Nai, around the Nhon Trach industrial parks and across southern Vietnam. Walsin Technology (Walsin) is the line we are authorised for. We parsed our MLCC upload files, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, on 17 November 2026, and counted distinct part numbers in 0201 across the three Walsin series built for RF work: UF (ultra microwave), RF (microwave) and HH (high Q, low ESR). All three are covered by Walsin’s datasheets WTC_MLCC_Microwave_RF.pdf and WTC_MLCC_HQ_Low_ESR_HH.pdf. Every part number below is real.
What is Coherent building in Nhon Trach, Dong Nai?
More factory space for a photonics and networking maker that already runs a plant there. Vietnam Investment Review reported on 25 June 2026 that Coherent leased about 30,000 square metres of ready-built factory space at KTG Industrial Nhon Trach 2 in Dong Nai, a deal Savills Vietnam announced on 24 June.
The same report says Coherent opened a Dong Nai plant at Nhon Trach Industrial Park in July 2025, an investment of 127 million US dollars, and describes the group’s work as advanced materials, networking and photonics for semiconductor, communications and industrial customers. The report does not say what the new space will make, so neither do we. What it does tell a component engineer is that Dong Nai now hosts high-frequency, high-speed optical and photonics assembly, with suppliers and EMS lines around it. Those boards use small-value RF capacitors in places where a fraction of a picofarad moves the result.
Why do photonics and optical module boards need a 0201 RF capacitor with a tight pF tolerance?
Because at 0.5 pF a tolerance of plus or minus 0.1 pF is a 20 percent spread. On a matching network, a laser-driver or TIA peaking position, or a short DC-block on a high-speed line, the capacitance sets where the response sits, and a 0201 part keeps the pad parasitics small enough for the tolerance to matter.
Below 10 pF, RF capacitors carry an absolute tolerance in picofarads, not a percentage. A plus or minus 0.25 pF part at 0.5 pF can sit anywhere from 0.25 to 0.75 pF, which on a tuned position is a different circuit. Tightening to plus or minus 0.02 pF holds the same value within 4 percent. Whether your design needs that is a question for your simulation and your bench, not for us; our guide to high Q, low ESR MLCC for RF covers the Q and ESR side, and Walsin’s UF ultra microwave series explains the family.
How many 0201 RF capacitors does Walsin list in its UF series?
- We counted 206 distinct UF-series part numbers in 0201 and 79 in 0402, 285 in all, every one C0G/NP0 and rated to 125 °C, spanning 0.05 pF to 10 pF at 25 V, 50 V and 100 V.
| UF series in 0201, by tolerance | Parts |
|---|---|
| Plus or minus 0.02 pF (code P) | 20 |
| Plus or minus 0.03 pF (code Q) | 18 |
| Plus or minus 0.05 pF (code A) | 79 |
| Plus or minus 0.1 pF (code B) | 73 |
| Plus or minus 0.25 pF (code C) | 7 |
| 1, 2 or 5 percent | 9 |
| Total | 206 |
By voltage, the 206 split 78 at 100 V, 76 at 50 V and 52 at 25 V. Across all three RF families our extract holds 1,186 distinct 0201 parts: 206 UF, 763 RF and 217 HH. The 38 parts at plus or minus 0.03 pF or tighter are all UF; in our count of 17 November 2026 the RF and HH series stop at plus or minus 0.05 pF in 0201. We have not seen the 0201 tolerance ladder counted across the three series anywhere else.
Which Walsin parts cross a 0.5 pF, 0201, 50 V brief at plus or minus 0.02 pF?
One matches exactly, and the others miss on one field each. For 0.5 pF, 0201, C0G, 50 V at plus or minus 0.02 pF, UF03N0R5P500 is the direct fit; the same value at 0.03 or 0.05 pF, in 0402, or in Walsin’s RF and HH series, misses the brief on tolerance or size.
| Brief: 0.5 pF, 0201, C0G, 50 V, ±0.02 pF | Walsin part | Series | Match / mismatch | Your incumbent |
|---|---|---|---|---|
| Direct fit | UF03N0R5P500 |
UF | Match | |
| One tolerance step looser | UF03N0R5Q500 |
UF | Mismatch in tolerance (±0.03 pF) | |
| Higher voltage, looser | UF03N0R5A101 |
UF | Mismatch in tolerance (±0.05 pF); 100 V | |
| Bigger case | UF15N0R5P500 |
UF | Mismatch in size (0402) | |
| Microwave series | RF03N0R5A500 |
RF | Mismatch in tolerance (±0.05 pF) | |
| High Q series | HH03N0R5A500 |
HH | Mismatch in tolerance (±0.05 pF) |
All six list a 0.30 ±0.03 mm thickness in 0201. Leave the last column for your current part and compare the Q and self-resonance curves in both datasheets before you swap. Our walk-through of how to read a Walsin MLCC part number shows where the tolerance letter sits.
When should a Dong Nai team pick UF over Walsin’s RF or HH series?
When the tolerance in picofarads is the deciding field. Choose UF for 0.05 to 10 pF positions that need plus or minus 0.02 or 0.03 pF; RF covers a far wider value range in 0201, 0.1 pF up to 18 nF across 763 parts, and HH is the high Q, low ESR family with 217 parts.
A practical rule from the counts: if your incumbent is a sub-picofarad part with a P or Q-class tolerance, start in UF; if it is a few picofarads at plus or minus 0.1 pF or a percentage tolerance, RF or HH will usually hold a cross too. For bench and prototype work, 27 RF-series 0201 lines, including RF03N0R4B500 and RF03N3R9C500, and one UF line, UF03N3R9B101, are on our shelf in Hong Kong (snapshot 9 Nov 2026). The rest are to order: request a quote and we source them through our authorised Walsin channel. The MLCC range page lists every series.
How Venatech helps: what can we supply to a Dong Nai photonics line?
The whole capacitor and resistor list, crossed in one pass. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, including all 1,186 Walsin RF-class MLCC in 0201.
Paste your small-value RF lines into the cross-reference tool, upload the full BOM at /bom/, or check the dated ready stock list. We serve Vietnam from Hong Kong in small lots, which suits engineering builds and pilot runs, and we quote fast. We confirm availability, date code and lead time on each quote and promise none in advance; qualification stays with your engineers, and import questions with your compliance team.
The short version
- Coherent leased about 30,000 square metres at KTG Industrial Nhon Trach 2, Dong Nai, after opening a 127 million US dollar plant at Nhon Trach in July 2025 (Vietnam Investment Review, 25 June 2026).
- Walsin’s UF series lists 206 parts in 0201, 0.05 pF to 10 pF, all C0G.
- 38 of them are held to plus or minus 0.03 pF or tighter; in 0201 that tolerance is found only in UF.
- For 0.5 pF, 0201, 50 V at plus or minus 0.02 pF, UF03N0R5P500 matches.
Send us the sub-10 pF capacitors from your optical or RF board and we will return the Walsin crosses with every difference stated. How tight does your tightest matching capacitor really need to be?
Related reading
- Walsin’s UF ultra microwave MLCC series
- High Q, low ESR MLCC for RF
- How to read a Walsin MLCC part number
- Cross-reference tool, BOM upload and ready stock snapshot
Last reviewed: 17 November 2026.
Sources
Fetched 17 November 2026.
- Vietnam Investment Review, US giant Coherent expands business in Vietnam, 25 June 2026: https://vir.com.vn/us-giant-coherent-expands-business-in-vietnam-155424.html
- Venatech MLCC upload files Venatech_MLCC_Upload_01.xlsx to _08.xlsx and Walsin’s WTC_MLCC_Microwave_RF.pdf and WTC_MLCC_HQ_Low_ESR_HH.pdf datasheets as linked in the export, re-measured 17 November 2026; Venatech ready stock snapshot dated 9 November 2026.
Frequently asked questions
How many 0201 RF capacitors does Walsin make in its UF series?
206 in our count of 17 November 2026, from 0.05 pF to 10 pF at 25, 50 and 100 V, all C0G/NP0. The UF series has 79 more parts in 0402.
Which Walsin part is a 0.5 pF, 0201, 50 V capacitor at plus or minus 0.02 pF?
UF03N0R5P500. UF03N0R5Q500 is the same value at plus or minus 0.03 pF. Confirm Q and self-resonance against both datasheets.
What is the tightest tolerance on a Walsin 0201 RF capacitor?
Plus or minus 0.02 pF, on 20 UF-series parts. In 0201, Walsin’s RF and HH series start at plus or minus 0.05 pF.
What is the difference between Walsin’s UF, RF and HH MLCC series?
UF is ultra microwave with the tightest picofarad tolerances, RF is the wide-range microwave series (763 parts in 0201), and HH is the high Q, low ESR family (217 parts in 0201).
Does Venatech stock 0201 RF capacitors for Vietnam?
We hold stock in Hong Kong: 27 RF-series 0201 lines and one UF line are on our shelf in Hong Kong (snapshot 9 Nov 2026). Other UF parts are quoted through our authorised Walsin channel.
Can Venatech supply photonics and EMS makers in Dong Nai, Vietnam?
Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to Vietnam. Use the cross-reference tool or upload a BOM; confirm import rules with your compliance team.