NEWS

0402 MLCC for Storage and Computing Boards in Singapore: Electronics Exports Up 73.9 Percent in October and 60 Walsin Parts at 1 µF or More

For a high-capacitance 0402 MLCC on a storage or computing board in Singapore, Walsin Technology (Walsin) lists 60 parts at 1 µF or more, up to 22 µF, and 9 of them are on our shelf in Hong Kong (snapshot 9 Nov 2026). Venatech, Walsin’s authorised distributor in Hong Kong, crosses your capacitor and quotes the Walsin line.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for hardware and sourcing engineers in Singapore who build or support disk-media, storage, PC and semiconductor-related boards, where small cases and high capacitance meet. The news figures name their source and date. The counts are ours: we parsed Walsin’s MLCC exports, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx (23,360 distinct part numbers), and read each 0402 part against the datasheet it points to, mostly WTC_MLCC_General_Purpose.pdf.

What did Singapore’s October 2026 export figures show for electronics?

Strong growth again. Red Hot Singapore reported on 17 November 2026, citing Enterprise Singapore, that non-oil domestic exports rose 79.8 percent year on year in October, and that electronics exports rose 73.9 percent after a 107.6 percent rise in September.

Within electronics, the same report lists disk media products up 189.6 percent, personal computers up 81 percent and integrated circuits up 53.1 percent. Non-electronics exports rose 81.9 percent. The headline beat the 37.7 percent forecast in a Bloomberg poll. We add no forecast. For a hardware engineer in Singapore, the useful reading is the product mix: disk drives, PCs and the boards built around chips are where a 0402 MLCC at 1 µF or more does the decoupling work, and all three product lines grew in October.

Why do storage and computing boards in Singapore lean on high-capacitance 0402 MLCC?

Because board area is the constraint. An 0402 MLCC measures 1.0 by 0.5 mm, and Walsin fits up to 22 µF into that case at 4 V or 6.3 V; on a dense controller or drive board, that puts bulk decoupling right at the power pin.

A storage controller, a drive’s preamp and motor driver, or a PC’s processor rails all switch fast and draw current in short pulses. The capacitor that matters is the one closest to the pin, and close to the pin there is room only for 0402 or smaller. Engineers place several 1 µF to 10 µF parts in 0402 under or beside a BGA, rather than one larger part further away. Our guide to MLCC capacitance by case size shows where each case tops out, and the MLCC range lists every part.

How many Walsin 0402 MLCC reach 1 µF or more?

Sixty part numbers. We counted 60 distinct Walsin 0402 MLCC at 1 µF or more, out of 3,971 Walsin parts in 0402; 27 sit at 1 µF, 16 at 2.2 µF, 7 at 4.7 µF, 7 at 10 µF, 2 at 22 µF and 1 at 4.3 µF.

Capacitance 4 V 6.3 V 10 V 16 V 25 V 35 V Total
1 µF 0 11 6 4 4 2 27
2.2 µF 0 6 6 2 2 0 16
4.3 µF 1 0 0 0 0 0 1
4.7 µF 0 3 3 1 0 0 7
10 µF 3 3 1 0 0 0 7
22 µF 1 1 0 0 0 0 2
Total 5 24 16 7 6 2 60

By dielectric, 33 are X5R (to 85 °C), 20 are X6S (to 105 °C), 4 are X7S and 3 are X7R (to 125 °C). Fifty-five sit in General Purpose; the rest are two low-profile TT parts at 0.3 mm, two soft-termination SH parts and one feed-through FT part. The 4.3 µF part, FT15X435M4R0, is a three-terminal feed-through, a different job from a plain decoupler. We have not seen this 0402 slice laid out by value and voltage elsewhere.

Which Walsin 0402 MLCC fits a 2.2 µF, 10 V brief?

Four parts match exactly. For a brief of 2.2 µF, 0402, at least 10 V and X5R or better, 0402X225K100 (X5R, ±10%) matches with the tightest thickness tolerance, and 0402S225K100 (X6S) and 0402A225K100 (X7S) match with a wider temperature range.

Put your incumbent part in the last column and compare each field.

Walsin part Dielectric Voltage Tolerance Thickness Match / mismatch with 2.2 µF, 0402, 10 V or more, X5R or better Your incumbent
0402X225K100 X5R 10 V ±10% 0.50 ±0.05 mm Match
0402X225M100 X5R 10 V ±20% 0.50 ±0.05 mm Match, wider tolerance
0402S225K100 X6S 10 V ±10% 0.50 ±0.20 mm Match, to 105 °C; check height
0402A225K100 X7S 10 V ±10% 0.50 ±0.20 mm Match, to 125 °C; check height
0402X225K160 X5R 16 V ±10% 0.50 ±0.20 mm Match, more voltage headroom
0402X225K250 X5R 25 V ±10% 0.50 ±0.20 mm Match, most headroom
0402X225K6R3 X5R 6.3 V ±10% 0.50 ±0.05 mm Mismatch: voltage below 10 V
0402X225M6R3 X5R 6.3 V ±20% 0.50 ±0.05 mm Mismatch: voltage; on our shelf

Watch the thickness column. Of the 16 Walsin 2.2 µF 0402 parts, we found only four print the tight ±0.05 mm tolerance; the other twelve allow up to 0.70 mm. Under a heatsink, a shield can or a drive’s low-profile cover, that difference decides whether the part fits. Confirm against both datasheets and qualify in your own circuit.

How much capacitance does a 0402 MLCC keep under DC bias?

Often well under half at rated voltage. A Class II 0402 MLCC loses capacitance as DC bias rises, and the loss is steepest in small cases with high values; a 2.2 µF part on a 3.3 V rail can deliver far less than 2.2 µF, so choose by effective capacitance, not the printed value.

This is why the 16 V and 25 V parts in the table are worth their place: a higher-rated part of the same value usually keeps more capacitance at your working voltage. Ageing adds a further slow loss over time for X5R and X6S. Our post on MLCC DC bias and voltage derating shows the method.

Which of these 0402 parts are on the Hong Kong shelf?

Nine of the 60. Nine Walsin 0402 MLCC at 1 µF or more are on our shelf in Hong Kong (snapshot 9 Nov 2026): 0402X105K100, 0402X105K250, 0402X105K6R3, 0402B105K6R3, 0402S105K6R3, 0402X225M6R3, 0402X475M100, 0402X475M6R3 and 0402X226M6R3.

That covers X5R at 1 µF (6.3 V, 10 V and 25 V), 2.2 µF (6.3 V), 4.7 µF (6.3 V and 10 V) and 22 µF (6.3 V), plus X7R and X6S options at 1 µF and 6.3 V. For the other 51, request a quote and we source them through our authorised Walsin channel. Each quote states availability, date code and lead time; we make no stock, price or lead-time promise. See the full dated list on ready stock.

How Venatech helps: what should a Singapore hardware team send us?

The decoupling parts from your BOM. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, stating every field where the Walsin part differs from your original.

Paste a capacitor code into the cross-reference tool, or upload the whole BOM and request a quote through the site. The ready-stock snapshot is dated 9 November 2026. We serve Woodlands, Ang Mo Kio and Jurong from Hong Kong, with fast quotes and small lots for NPI, repair and line-down cover. Walsin is the line we are authorised for; Stackpole and Viking are lines we supply.

The short version

Singapore’s electronics exports rose 73.9 percent in October, with disk media up 189.6 percent, PCs up 81 percent and chips up 53.1 percent, Red Hot Singapore reported on 17 November 2026, citing Enterprise Singapore. Those boards decouple their power pins with high-capacitance 0402 MLCC. Walsin covers that with 60 parts at 1 µF or more, up to 22 µF, 9 of them on our Hong Kong shelf, and 0402X225K100 meets a 2.2 µF, 10 V brief at 0.50 ±0.05 mm.

Send us the 0402 capacitors on your board and we will return Walsin crosses with every difference stated. Which of your parts sits under the lowest cover on the board?

Related reading

Last reviewed: 17 November 2026.

Sources

Fetched 17 November 2026.

  • Red Hot Singapore, report on Singapore’s October 2026 non-oil domestic exports (Enterprise Singapore data), 17 November 2026: https://www.redhot.sg/singapore-s-key-exports-surge-79-8-in-october-driven-by-non-electronics-740116.html
  • Walsin MLCC exports, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 17 November 2026; Walsin WTC_MLCC_General_Purpose.pdf, WTC_MLCC_Low_Profile_TT.pdf and WTC_MLCC_Soft_term_SH.pdf datasheets; Venatech Hong Kong stock snapshot dated 9 November 2026.

Frequently asked questions

How did Singapore’s electronics exports do in October 2026?

Red Hot Singapore reported on 17 November 2026, citing Enterprise Singapore, that electronics exports rose 73.9 percent year on year. Disk media rose 189.6 percent, PCs 81 percent and integrated circuits 53.1 percent.

What is the highest capacitance Walsin offers in an 0402 MLCC?

22 µF, in two X5R parts rated 4 V and 6.3 V. We counted 60 Walsin 0402 MLCC at 1 µF or more in all.

Which Walsin part crosses a 2.2 µF 0402 capacitor rated 10 V?

0402X225K100 matches 2.2 µF, 10 V and X5R at 0.50 ±0.05 mm. 0402S225K100 and 0402A225K100 match with a wider temperature range but a looser thickness tolerance.

Why does the thickness tolerance of an 0402 MLCC matter?

Twelve of Walsin’s 16 parts at 2.2 µF in 0402 allow up to 0.70 mm. Under a shield or a low cover, check the maximum height on the datasheet.

Are any Walsin 0402 MLCC at 1 µF or more in stock in Hong Kong?

Nine are on our shelf in Hong Kong (snapshot 9 Nov 2026), from 1 µF to 22 µF. Stock moves, so each quote confirms availability, date code and lead time.

Can Venatech supply Walsin 0402 MLCC to Singapore from Hong Kong?

Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong. Request a quote for any of the 60 parts and we source them through our authorised Walsin channel.


Share This, Choose Your Platform!