NEWS

LED Driver Surge Protection in Noida, India: 24 Walsin MOV Varistors at 275 to 320 Vac for Lighting Boards

LED driver surge protection on a 230 V board usually starts with a metal oxide varistor across the mains input. Walsin lists 24 MOV varistors rated 275, 300 or 320 Vac in the 5 to 14 mm disc sizes that fit a driver, with peak currents from 400 A to 8,000 A. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, the authorised Walsin distributor in Hong Kong, wrote this for LED driver and luminaire engineers and buyers in Noida, Greater Noida and the rest of India. Walsin Technology (Walsin) is the line we are authorised for. On 17 November 2026 we parsed our varistor upload file, Venatech_MOV_Upload_01.xlsx, and counted distinct part numbers by working voltage, disc size and series. Every part number below is real and comes from that file.

What is Calcom Vision building at its Greater Noida lighting plant?

More lighting capacity, with outdoor products added. Electronics For You Business reported on 5 May 2026 that Greater Noida contract maker Calcom Vision runs 11 SMT lines and 10 assembly lines there, and is expanding the plant from 15,000 to 30,000 square metres as it moves into solar street lighting.

The same report says the company has made lighting since 2009 as an original design manufacturer, mainly LED lights for brand owners, and that the expansion allows 10,000 to 15,000 solar street lights a year, scaling with orders. Construction World reported on 20 May 2025 that Calcom’s investment commitment under India’s PLI scheme for white goods rose to 250 million rupees, covering LED drivers, modules and engines among other parts. Those are the publications’ figures, not ours.

Why does LED driver surge protection start with a mains varistor?

Because the varistor is the part that takes the first hit. A metal oxide varistor sits across live and neutral after the fuse, stays almost open at normal mains, and clamps when a surge pushes the voltage past its varistor voltage, so the bridge rectifier, bulk capacitor and switching stage behind it see a lower peak.

Indian mains is nominally 230 V, and drivers for it are commonly specified with a varistor of 275 Vac continuous rating or higher, so that grid swells do not keep the part conducting. Outdoor and street-lighting drivers often add a second stage, such as a gas discharge tube or a larger disc, because their cables pick up more surge energy than an indoor downlight. A solar street light is a different case: it runs from a panel and battery, so its surge question sits on the DC side. Our guide on how to choose an MOV varistor sets out the voltage and energy checks.

How many Walsin MOV varistors suit a 230 V LED driver?

24 in the driver-sized discs. We counted 379 Walsin MOV varistors in all, 51 of them at 275, 300 or 320 Vac; 24 of those 51 are 5, 7, 10 or 14 mm discs, the sizes that fit inside a driver can, spread over the Standard D, High Energy E and Super High Energy V series.

Walsin MOV at 275 to 320 Vac 5 mm 7 mm 10 mm 14 mm
Standard (D series) 3 parts, 400 A 3 parts, 1,200 A 3 parts, 2,500 A 3 parts, 4,500 A
High Energy (E series) 3 parts, 800 A 3 parts, 1,750 A none in this size none in this size
Super High Energy (V series) none in this size none in this size 3 parts, 4,000 A 3 parts, 8,000 A

Each cell holds one part, per Walsin’s catalogue file MOV_catalog.pdf and our Venatech_MOV_Upload_01.xlsx extract, at 275 Vac, one at 300 Vac and one at 320 Vac, with varistor voltages of 430, 470 and 510 V at plus or minus 10 percent. We checked all 24 against the series names in the file. The other 27 parts at these voltages are 18 to 53 mm discs and blocks for surge panels and industrial gear, up to 80,000 A.

Which Walsin varistor crosses a 300 Vac, 10 mm LED driver brief?

One matches outright and one more matches with headroom. At 300 Vac working voltage in a 10 mm disc, SR471K10D matches at 2,500 A peak current and SR471K10E in the Super High Energy series matches at 4,000 A; the 275 and 320 Vac neighbours and the 7 and 14 mm discs each miss on one field.

Brief: 300 Vac, 10 mm disc, 470 V varistor voltage Walsin part Series Peak current Match / mismatch Your incumbent
Direct fit SR471K10D Standard D 2,500 A Match
More surge headroom SR471K10E Super High Energy V 4,000 A Match, higher rating
Lower voltage SR431K10D Standard D 2,500 A Mismatch in voltage (275 Vac)
Higher voltage SR511K10D Standard D 2,500 A Mismatch in voltage (320 Vac); clamps higher
Smaller disc SR471K07D Standard D 1,200 A Mismatch in size and peak current
Larger disc SR471K14D Standard D 4,500 A Mismatch in size (14 mm)

Leave the last column for your current part. A higher-energy disc in the same size usually drops in, but check lead spacing and body thickness against the datasheet and your board, and keep the clamping voltage under what the bridge and bulk capacitor can survive. Our post on Walsin MOV series selection compares the series in more depth.

What separates Walsin D, E and V series discs at the same voltage?

Surge rating per disc size. At 300 Vac, Venatech_MOV_Upload_01.xlsx lists 1,200 A for a 7 mm Standard D disc against 1,750 A for a 7 mm High Energy E disc, and 2,500 A for a 10 mm D disc against 4,000 A for a 10 mm Super High Energy V disc.

That lets a driver designer either shrink the disc or raise the surge margin without changing the footprint class. Walsin’s datasheet sets the energy and pulse-life curves that decide the final choice. Street-lighting drivers, which face longer cable runs, are the obvious case for the V series in 10 or 14 mm. Indoor drivers and lamps where 5 or 7 mm fits are where D and E sit. For the rest of the driver, our note on passives for an LED driver covers the input capacitor, sense resistor and Y capacitor that sit around the varistor. The full Walsin range is on our varistor product page. The varistors in this post are to order: request a quote and we source them through our authorised Walsin channel.

How Venatech helps: what can we supply to a Noida lighting team?

The varistor and the rest of the driver’s passives, crossed in one pass. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, across MLCC, chip resistors, varistors and the other Walsin lines.

Paste your current varistor and capacitor part numbers into the cross-reference tool, upload a full driver BOM at /bom/, or see the dated ready stock list. We serve India from Hong Kong in small lots, which suits samples, pilot builds and second-source trials, and we quote fast. We confirm availability, date code and lead time on each quote and promise none in advance. Surge testing and approvals stay with you, and import questions go to your compliance team.

The short version

  • Calcom Vision runs 11 SMT lines and 10 assembly lines in Greater Noida and is doubling the plant to 30,000 square metres (Electronics For You Business, 5 May 2026).
  • Walsin lists 379 MOV varistors; 51 are rated 275, 300 or 320 Vac, and 24 of those are 5 to 14 mm discs.
  • For 300 Vac in 10 mm, SR471K10D matches at 2,500 A and SR471K10E at 4,000 A.
  • E and V series discs carry more surge current than D series discs of the same size.

Send us the varistor and input-stage parts from your LED driver and we will return the Walsin crosses with every difference stated. What surge level does your luminaire have to pass?

Related reading

Last reviewed: 17 November 2026.

Sources

Fetched 17 November 2026.

  • Electronics For You Business, Calcom Vision enters solar street lighting, eyes one billion rupees by FY30, 5 May 2026: https://www.electronicsforyou.biz/?p=134387
  • Construction World, DPIIT grants PLI upgrade to Calcom; 250 million rupees invested in LED expansion, 20 May 2025: https://www.constructionworld.in/policy-updates-and-economic-news/dpiit-grants-pli-upgrade-to-calcom;-rs-250-mn-invested-in-led-expansion/73811
  • Venatech varistor upload file Venatech_MOV_Upload_01.xlsx and Walsin’s catalogue MOV_catalog.pdf as linked in the export, re-measured 17 November 2026.

Frequently asked questions

How many Walsin MOV varistors suit LED driver surge protection in India?

24 in our count of 17 November 2026: Walsin parts rated 275, 300 or 320 Vac in 5, 7, 10 or 14 mm discs, across the Standard D, High Energy E and Super High Energy V series, with peak currents from 400 A to 8,000 A.

Which Walsin varistor is a 300 Vac, 10 mm part?

SR471K10D in the Standard D series at 2,500 A, or SR471K10E in the Super High Energy series at 4,000 A. Both have a 470 V varistor voltage. Check lead spacing and clamping voltage against your board.

Is a 275 Vac varistor enough for a 230 V LED driver in India?

It is a common starting point, but many outdoor drivers choose 300 or 320 Vac to ride through grid swells. Take the rating from your surge specification; Walsin lists all three ratings in each driver-sized disc.

Does a solar street light need a mains varistor?

Not on a panel-and-battery design, because there is no mains input; its surge protection sits on the DC side. A grid-fed street light driver does need a mains-side varistor, often with a second protection stage.

Can Venatech supply Walsin varistors to Noida and Greater Noida?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to India. The varistors here are to order through our authorised Walsin channel; confirm import rules with your compliance team.

Can Venatech cross my current varistor to Walsin?

Paste the part number into our free cross-reference tool or upload the BOM. We return the Walsin match and state every difference in voltage, disc size and peak current; qualification stays with you.


Share This, Choose Your Platform!