RoHS exemption 7(c)-I, for lead in glass or ceramic in electronic components, carries an expiry date of 30 June 2027 under the Pack 22 changes. For buyers in Italy, Walsin Technology (Walsin) states its RoHS position on two approval sheets covering 8,721 MR and WR thick-film resistors. Venatech, the authorised Walsin distributor in Hong Kong, supplies the paperwork.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for component and purchasing engineers in Italy who keep the RoHS file for appliance, automotive and automation boards. It is a perspective, not legal advice: whether an exemption applies to your product, and what happens if it is renewed or not, is a question for your compliance team. What we can show is exactly what Walsin’s own documents say, part family by part family. We read the two Walsin chip-resistor approval sheets we hold, re-measured Walsin’s chip-resistor export (Venatech_ChipR_Upload_01.xlsx onward, 234,378 distinct part numbers) and checked our stock list as at 9 November 2026, all on 16 November 2026.
What changed for RoHS exemption 7(c)-I, and when?
A dated expiry. EUR-Lex lists Commission Delegated Directive (EU) 2025/2363, adopted on 8 September 2025 and in force from 11 December 2025, on the RoHS exemption for lead in glass or ceramic components; Assent’s summary, fetched on 16 November 2026, gives 30 June 2027 as the expiry of exemption 7(c)-I.
Assent’s page on the Pack 22 lead exemptions lists the companion dates: 7(c)-II, for lead in dielectric ceramic in capacitors rated 125 V AC or 250 V DC or higher, expires on 31 December 2027, and two new entries, 7(c)-V for lead in glass or glass-matrix compounds and 7(c)-VI for lead in ceramics such as PZT or PTC, also run to 31 December 2027. Assent says renewal applications for the exemptions expiring on 30 June 2027 were due by 31 December 2025 and that an industry group, the Umbrella Project, would file them. Whether a renewal has been granted, and what that means for products already on the market, is for your compliance team to confirm against the Official Journal.
Why does RoHS exemption 7(c)-I matter to resistor buyers in Italy?
Because thick-film resistors are a glass-and-ceramic part. A thick-film chip resistor prints its resistive layer and protective coat on a ceramic substrate, and some manufacturers declare RoHS compliance with exemption 7(c)-I for it; an Italian buyer who files supplier declarations will see that exemption number on some sheets and not on others.
That difference is easy to miss across a 300-line BOM, and the 30 June 2027 date makes it worth finding now. It does not mean a part is non-compliant today, and we make no claim about any manufacturer’s renewal plans or materials. It means the declaration in your file names a dated exemption, and someone in your organisation needs to know which lines carry it. Our pillar on the Walsin general-purpose chip resistor range covers the WR family, and Walsin automotive chip resistors: MR, SR and the AEC-Q200 split covers MR. The chip resistor range lists every Walsin family.
What do Walsin’s MR and WR approval sheets say about RoHS?
Two different statements. We read both sheets: Walsin’s MR approval sheet (ASC_MR_V13, March 2024, sizes MR04 to MR12) states “RoHS 2 compliant with exemption 7C-I and Halogen free”, while the WR approval sheet we hold (ASC_WR_V24, September 2016, sizes WR04 to WR12) states RoHS 2 compliant and halogen free, with no exemption named.
| Walsin family | Approval sheet we hold | Sizes covered | Part numbers linked in the export | RoHS statement on the sheet |
|---|---|---|---|---|
| MR, thick film, automotive | ASC_MR_V13, Mar 2024 | 0402, 0603, 0805, 1206, 1210 | 4,845 | RoHS 2 compliant with exemption 7C-I |
| WR, thick film, general purpose | ASC_WR_V24, Sep 2016 | 0402, 0603, 0805, 1206 | 3,876 | RoHS 2 compliant, no exemption named |
| Total | 8,721 |
We counted the export rows that link to each sheet: 969 MR part numbers in each of five sizes, and 969 WR part numbers in each of four. The WR sheet we hold is dated 2016, so ask for the current revision before you rely on it. Both sheets state a lead-free tin outer termination, which is a separate question from glass or ceramic content.
Which Walsin 10 kilohm resistors fit an Italian board, and what does each sheet state?
Eight parts, four sizes. For a 10 kilohm, 1 percent position, Walsin offers MR04X1002FTL, MR06X1002FTL, MR08X1002FTL and MR12X1002FTL on the MR sheet and WR04X1002FTL, WR06X1002FTL, WR08X1002FTL and WR12X1002FTL on the WR sheet; three of the WR parts are on our shelf in Hong Kong (snapshot 9 Nov 2026).
Fill the last column with your incumbent and the exemption, if any, on its declaration.
| Walsin part | Case | Rated power | TCR (ppm/°C) | Sheet statement | Match / mismatch with a 10 kilohm, 1%, general-purpose position | Your incumbent and its declaration |
|---|---|---|---|---|---|---|
WR04X1002FTL |
0402 | 1/16 W | ±100 | RoHS 2, no exemption named | Match; on our shelf in Hong Kong | |
WR06X1002FTL |
0603 | 1/10 W | ±100 | RoHS 2, no exemption named | Match; on our shelf in Hong Kong | |
WR08X1002FTL |
0805 | 1/8 W | ±100 | RoHS 2, no exemption named | Match; on our shelf in Hong Kong | |
WR12X1002FTL |
1206 | 1/4 W | ±100 | RoHS 2, no exemption named | Match; to order | |
MR06X1002FTL |
0603 | 1/8 W | ±100 | RoHS 2 with exemption 7C-I | Match on value and more power; note the 7C-I statement | |
MR08X1002FTL |
0805 | 1/4 W | ±100 | RoHS 2 with exemption 7C-I | Match on value and more power; note the 7C-I statement |
The MR sheet also states AEC-Q200 compliance and anti-sulfur performance, which is why an automotive position in Turin may still choose it. For a white-goods board where neither is required, the WR rows fit with no exemption named on the sheet we hold. Confirm against both datasheets and qualify in your own circuit.
What should an Italian buyer ask for before 30 June 2027?
Three documents per line. Before 30 June 2027, ask for the current RoHS declaration for each exact part number, naming any exemption it relies on; the current revision of the approval sheet; and, for lines that name 7(c)-I, the manufacturer’s statement on renewal or substitution, then let your compliance team decide what the file needs.
The work is mostly sorting. Pull every thick-film resistor from the BOM, group by family, and mark which declarations name 7(c)-I, 7(c)-II or the new 7(c)-V and 7(c)-VI entries. Our note on anti-sulfuration resistors covers the sulfur question that often travels with automotive resistors. We supply original sealed Walsin packaging, lot and date code on each shipment and a certificate of conformity on request, and we pass Walsin’s declarations through as issued. We do not interpret them.
How Venatech helps
How Venatech helps is a resistor cross with the sheet named. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a BOM of thick-film resistors returns Walsin candidates you can sort by family and declaration.
Paste your resistor codes into the cross-reference tool, or upload the whole BOM and request a quote and the declarations. Our stock list as at 9 November 2026 holds 249 WR lines in 0402 to 1206 from the WR sheet; see the ready-stock snapshot. We serve Italian design teams and EMS buyers from Hong Kong, in small lots with fast quotes. Walsin is our authorised line; Stackpole and Viking are lines we supply. We give no legal or compliance advice on RoHS; confirm with your compliance team.
The short version
Delegated Directive (EU) 2025/2363 has been in force since 11 December 2025, and Assent lists 30 June 2027 as the expiry of RoHS exemption 7(c)-I unless it is renewed. Italian buyers should know which resistor declarations name it. Walsin states its position on 8,721 thick-film resistors across two sheets: MR names 7C-I, the WR sheet we hold names no exemption.
Send us your thick-film resistor list, and we will return Walsin crosses with the approval sheet and RoHS statement for each. How many lines in your RoHS file name an exemption that carries a 2027 date?
Related reading
- Walsin general-purpose chip resistor range
- Walsin automotive chip resistors: MR, SR and the AEC-Q200 split
- Anti-sulfuration resistors: SF thin film and SA arrays
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 16 November 2026
Sources
Fetched 16 November 2026.
- EUR-Lex, Commission Delegated Directive (EU) 2025/2363, adopted 8 September 2025, in force 11 December 2025: https://eur-lex.europa.eu/eli/dir_del/2025/2363/oj/eng
- Assent, “Final Delegated Directives for Key RoHS Lead Exemptions Adopted”, 19 September 2025, page modified 5 February 2026: https://www.assent.com/blog/draft-expiry-dates-for-key-rohs-lead-exemptions-published
- Assent, “The upcoming RoHS exemption expirations you need to know about”, undated: https://www.assent.com/blog/the-upcoming-rohs-exemption-expirations-you-need-to-know-about/
- Walsin approval sheets Walsin_MR_Automotive_Thick_Film_Chip_Resistor.pdf (ASC_MR_V13) and Walsin_WR_General_Purpose_Chip_Resistor.pdf (ASC_WR_V24); Walsin chip-resistor export, Venatech_ChipR_Upload_01.xlsx onward, re-measured 16 November 2026; Venatech stock list as at 9 November 2026.
Frequently asked questions
When does RoHS exemption 7(c)-I expire?
Assent lists 30 June 2027 as the expiry of exemption 7(c)-I under the Pack 22 changes, with renewal applications due by 31 December 2025. Confirm the current status in the Official Journal with your compliance team.
What does RoHS exemption 7(c)-I cover?
Assent describes it as lead in glass or ceramic in electrical and electronic components, other than dielectric ceramic in capacitors, for example in piezoelectric devices or in a glass or ceramic matrix compound.
Do Walsin chip resistors use RoHS exemption 7(c)-I?
Walsin’s MR approval sheet (ASC_MR_V13, March 2024) states RoHS 2 compliant with exemption 7C-I. The WR approval sheet we hold (ASC_WR_V24, 2016) states RoHS 2 compliant with no exemption named. Ask for the current declaration per part number.
How many Walsin resistors do those two approval sheets cover?
We counted 8,721 part numbers in the export linked to the two sheets: 4,845 MR parts in five sizes and 3,876 WR parts in four sizes, 969 per size.
Does this matter for appliance and automotive makers in Italy?
It matters to anyone in Italy who keeps a RoHS file with supplier declarations, because a declaration that names 7(c)-I names a dated exemption. What your file needs is for your compliance team to decide.
Is Venatech an authorised Walsin distributor for buyers in Italy?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Italy in small lots. Stackpole and Viking are lines we supply, not authorised lines.