NEWS

MLCC DC Bias Derating for Server Power Boards in Spain: 62 Walsin 10 uF Parts Rated 25 V or More

MLCC DC bias derating means choosing a ceramic capacitor rated well above the rail, because Class II capacitance falls as DC voltage rises. Of 148 Walsin 10 uF Class II MLCC, we counted 62 rated 25 V or more and 7 rated 100 V. Venatech is the authorised Walsin distributor in Hong Kong, serving Spain.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for power and NPI engineers, and the buyers beside them, at server assembly, test and EMS suppliers in Aragón and across Spain. Walsin Technology (Walsin) is the line we are authorised for. On 16 November 2026 we parsed all 23,360 part numbers in our MLCC upload files, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, filtered them to 10 uF in Class II dielectrics, and checked the result against our ready stock snapshot dated 9 November 2026. Every part number below is real.

What is AWS building in Aragón, Spain?

Server assembly and test, alongside data centres. Invest in Spain reported on 18 May 2026 that AWS will add support facilities in Aragón, including a factory for the assembly and final testing of servers and a facility to manufacture and repair AI and machine learning servers, with about 1,800 jobs once fully operational.

The same report puts AWS’s total investment in Spain at 33.7 billion euros, a figure the Spanish government’s La Moncloa site also gave on 2 March 2026, with data centres across Teruel, Huesca and Zaragoza. Those are reported figures, not ours, and we make no claim about which components AWS or its suppliers use. The news means server power boards, test fixtures and repair spares now have a reason to be built and stocked in Spain, and each board carries bulk ceramic capacitors on 12 V and 48 V rails.

What is MLCC DC bias derating, and why does a 12 V rail need it?

Because a 10 uF Class II MLCC on a 12 V rail can deliver far less than 10 uF. X5R and X7R capacitors lose capacitance as the applied DC voltage rises, and the loss is steepest in small cases and at a high fraction of rated voltage, so a 10 uF part rated 16 V and run at 12 V is working at 75 percent of its rating.

Derating means leaving that margin on purpose: a higher voltage rating, a larger case, or both, with the bank sized from the DC bias curve rather than the nameplate. A common working rule in server power design is to keep a bulk Class II MLCC at or below about half its rated voltage, which on a 12 V rail points to 25 V parts and on a 48 V bus to 100 V parts. Treat that as a starting point. The DC bias curve in Walsin’s datasheet for the exact part is the figure that counts, and our MLCC DC bias and voltage derating guide explains how to read one.

How many Walsin 10 uF MLCC survive a derating filter at 25 V and above?

62 of 148. We counted 148 distinct Walsin 10 uF part numbers in X5R, X6S, X7R and X7S; 62 are rated 25 V or more, 31 at 25 V, 7 at 35 V, 17 at 50 V and 7 at 100 V, and the 25 V-plus parts start in 0603 and run to 2225.

Case size All 10 uF Class II Rated 25 V Rated 35 V Rated 50 V Rated 100 V
0603 12 1 0 0 0
0805 35 7 0 2 0
1206 42 11 3 2 0
1210 41 11 4 8 2
1812 1 0 0 1 0
2220 9 1 0 3 5
2225 1 0 0 1 0
0402 7 0 0 0 0

At 10 uF, 0402 stops at 10 V, 1206 and 1210 carry most of the 25 V to 50 V choice, and 100 V needs 1210 or 2220. Of the 148, 67 are X7R and 61 are X5R. We have not seen this 10 uF voltage split counted anywhere else.

Which Walsin parts cross a 10 uF bulk capacitor on a 12 V server rail?

Seven clear candidates at 25 V to 50 V. For a 10 uF, 10 percent bulk capacitor on a 12 V rail, we shortlisted Walsin parts from 0805 to 1210 at 25 V, 35 V and 50 V; four of them are on our shelf in Hong Kong (snapshot 9 Nov 2026): 0805X106K250, 0805X106K500, 1206X106K500 and 1210B106K250.

Brief: 10 uF, 10 percent, 12 V rail Walsin part Size Dielectric Rated V Export file Match / mismatch
Smallest body at 25 V 0805X106K250 0805 X5R 25 V Venatech_MLCC_Upload_03.xlsx Match; check the bias curve, 0805 loses the most
0805 at 50 V 0805X106K500 0805 X5R 50 V Venatech_MLCC_Upload_03.xlsx Match, more voltage margin in the same footprint
1206 at 50 V 1206X106K500 1206 X5R 50 V Venatech_MLCC_Upload_03.xlsx Match, larger body keeps more capacitance
1206, X7R for heat 1206B106K350 1206 X7R 35 V Venatech_MLCC_Upload_04.xlsx Match; X7R holds to 125 C, X5R to 85 C
1206 X7R, soft termination SH31B106K350 1206 X7R 35 V Venatech_MLCC_Upload_08.xlsx Match, adds flex margin on thick server boards
1210 X7R at 25 V 1210B106K250 1210 X7R 25 V Venatech_MLCC_Upload_03.xlsx Match; larger footprint
1210 X7R at 35 V 1210B106K350 1210 X7R 35 V Venatech_MLCC_Upload_03.xlsx Match; larger footprint
Incumbent is 10 uF, 16 V, 0805 0805X106K160 0805 X5R 16 V on the shelf Mismatch for derating: runs at 75 percent of rating on 12 V

Compare thickness too: the 1210 X7R parts run from 2.00 mm to 2.50 mm in Walsin’s export, and a taller part can foul a heatsink. Our post on how to cross-reference an MLCC lists the fields to check first.

What about a 48 V bus: which 10 uF Walsin MLCC are rated 100 V?

Seven, in 1210 and 2220. We found 7 Walsin 10 uF X7R parts rated 100 V: two soft-termination SH parts in 1210, SH32B106K101 and SH32B106M101, and five in 2220, including 2220B106K101 in the Big Sizes series and ST55B106K101 in the AEC-Q200 ST soft-termination series.

On a 48 V bus, 100 V parts keep the same half-rating margin. The 2220 body gives more capacitance retention under bias than a 1210, and soft termination matters on large ceramic bodies because they are the most exposed to board flexure during press-fit, depanelling and rework. See soft termination MLCC for how the SH, SG and ST families differ. None of the seven is on the 9 November snapshot; request a quote and we source them through our authorised Walsin channel. The MLCC range page lists every series.

How Venatech helps: what can a Spanish server-board team send us?

A capacitor list, and we return the derated Walsin crosses. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch at /cross-reference/ decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and 12 of the 148 Walsin 10 uF Class II parts are on our shelf in Hong Kong (snapshot 9 Nov 2026).

Paste a capacitor line into the cross-reference tool, or upload the whole power-stage BOM at /bom/, and we return the Walsin options with rated voltage, size and thickness stated against your part. Check the dated ready stock list and request a quote through the site. We serve Spain from Hong Kong in small lots, which suits NPI builds, test fixtures and repair spares, and we confirm availability and date code on each quote. Qualification stays with your team.

The short version

  • Invest in Spain reported on 18 May 2026 that AWS will build server assembly, test and repair facilities in Aragón, with about 1,800 jobs.
  • MLCC DC bias derating: run a bulk Class II MLCC at about half its rating, so 25 V parts on a 12 V rail and 100 V parts on a 48 V bus, then confirm on the datasheet curve.
  • Walsin lists 148 distinct 10 uF Class II MLCC; 62 are rated 25 V or more and 7 reach 100 V.
  • 12 of the 148 are on our shelf in Hong Kong (snapshot 9 Nov 2026), 4 of them at 25 V or 50 V.

Send us the bulk-capacitor lines from your 12 V or 48 V stage and we will return the Walsin crosses with every difference stated. What fraction of rated voltage do your bulk MLCC see today?

Related reading

Last reviewed: 16 November 2026

Sources

Fetched 16 November 2026.

  • Invest in Spain, AWS to build Aragón data centre components factory, 18 May 2026: https://www.investinspain.org/en/news/2026/aws
  • La Moncloa, Government celebrates Amazon’s investment of 33.7 billion euros in data centres, 2 March 2026: https://www.lamoncloa.gob.es/lang/en/gobierno/news/Paginas/2026/20260302-wmc-amazon-investment.aspx
  • Venatech MLCC upload files Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx and ready stock snapshot dated 9 November 2026, re-measured 16 November 2026.

Frequently asked questions

What is MLCC DC bias derating?

Choosing a ceramic capacitor rated well above its working voltage because Class II capacitance falls as DC bias rises. A common starting rule is about half the rated voltage, confirmed on the part’s datasheet curve.

What voltage MLCC should I use on a 12 V rail?

For bulk Class II parts, 25 V is the usual starting point, with 35 V or 50 V where the board has room. Walsin lists 62 distinct 10 uF Class II parts rated 25 V or more.

Which Walsin 10 uF MLCC are rated 100 V for a 48 V bus?

Seven X7R parts: SH32B106K101 and SH32B106M101 in 1210, and five in 2220, including 2220B106K101 and ST55B106K101.

Does Venatech have 10 uF MLCC on the shelf in Hong Kong?

12 Walsin 10 uF Class II parts are on our shelf in Hong Kong (snapshot 9 Nov 2026), including 0805X106K250, 1206X106K500 and 1210B106K250. Stock moves; other lines are sourced on request.

Can Venatech supply server-board builders in Spain?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to Spain. Use the cross-reference tool or upload a BOM; confirm import rules with your compliance team.


Share This, Choose Your Platform!