NEWS

BIS QCO for Electrical Appliances in India: IS 302 Dates Run to 1 April 2027, and 186 Walsin X1/Y2 Safety Disc Capacitors from Venatech, Authorised Walsin Distributor

India’s BIS QCO for electrical appliances covers more than 90 appliance categories under IS 302, effective 1 October 2026 for larger makers, 1 January 2027 for small and 1 April 2027 for micro units. For mains inputs, Walsin Technology (Walsin) lists 186 X1/Y2 safety disc capacitors. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited wrote this for design, compliance and component engineers, and the buyers who support them, at household, kitchen, personal-care and commercial appliance makers in India and the EMS plants that build their control boards. The BIS QCO for electrical appliances is a product-certification rule, not a component rule, and this is perspective rather than legal or certification advice: confirm with your compliance team and your certification body how it applies to each model. What a product certification does fix is the list of safety-relevant parts on the mains input, and those parts are worth settling before a model goes for testing. On 19 November 2026 we re-measured Walsin’s disc-capacitor export (Venatech_DiscCap_Upload_01.xlsx, 929 part numbers), varistor export (Venatech_MOV_Upload_01.xlsx, 379 part numbers) and our ready-stock snapshot dated 9 November 2026.

What does the BIS QCO for electrical appliances require?

BIS certification and the ISI mark for more than 90 appliance types. India Briefing wrote on 29 April 2026 that the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026, notified on 6 April 2026, covers more than 90 categories rated up to 250 V single-phase and 480 V otherwise, including DC and battery-operated devices.

According to the same India Briefing guide, the order applies IS 302 (Part 1): 2024, which is based on IEC 60335-1:2020, and requires BIS certification under Scheme I with the ISI mark on product and packaging, ongoing factory audits and surveillance testing, and, for foreign makers, the Foreign Manufacturer Certification Scheme or a local manufacturing route. The product clusters run from kitchen and food-processing equipment to cleaning, personal care, heating and commercial equipment. Separately, Outlook Business reported on 27 June 2026 that DPIIT notified a Transition Facilitation (Quality Control) Order, 2026, letting manufacturers source eligible products under ten QCOs from suppliers registered under BIS Scheme-II. Which route fits your products is a question for your compliance team.

When do the BIS QCO dates apply to large, small and micro makers?

From 1 October 2026 to 1 April 2027, depending on size. Agile Regulatory wrote on 31 October 2026 that the 2026 order (S.O. 1739(E)) replaced the 2025 edition and moved the dates: 1 October 2026 for general manufacturers, 1 January 2027 for small enterprises and 1 April 2027 for micro enterprises.

Enterprise category Date under the 2025 order Date under the 2026 order
General manufacturers (not micro or small) 19 March 2026 1 October 2026
Small enterprises 19 June 2026 1 January 2027
Micro enterprises 19 September 2026 1 April 2027

Source: Agile Regulatory, 31 October 2026. India Briefing recommends starting certification six to nine months before a deadline. For a small or micro appliance maker in Noida, Chennai or Pune, that window is already open, and a model whose mains input is still changing is harder to certify.

Which passive components on an appliance mains input deserve a second look?

The line-to-earth capacitors, the surge parts and anything listed as safety-critical. On a typical 230 V appliance control board, Y-class capacitors from line to earth, X-class capacitors across the line and a metal-oxide varistor ahead of the power supply are the passives whose ratings, approvals and part numbers a safety assessment under an IEC 60335-1 based standard tends to examine.

Three checks help. First, confirm that each safety capacitor is the class the design calls for (Y2 for most line-to-earth positions on basic-insulated mains products) and that its approval documents are current. Second, record the exact part number of each safety-relevant component on the certification file, so a later substitution is a deliberate change rather than a purchasing accident. Third, before you add a second source, ask your certification body whether swapping a safety capacitor or varistor needs a review. Our explainers on X1/Y1 vs X1/Y2 safety capacitors and how to choose an MOV varistor cover the selection.

How many Walsin X1/Y2 safety capacitors and 275 Vac varistors are there?

186 X1/Y2 disc parts and 17 varistors at 275 Vac. We parsed all 929 rows of Walsin’s disc-capacitor export and counted 367 safety-certified parts: 186 X1/Y2 and 181 X1/Y1. Each of the 186 X1/Y2 rows lists the same approval set, including UL file E146544, CSA, VDE/ENEC, CQC and KC.

The 186 X1/Y2 parts split by rating into 57 at X1 440 Vac / Y2 250 Vac, 57 at X1 440 Vac / Y2 300 Vac, 23 at Y2 300 Vac with a 1,500 Vdc rating and 49 at Y2 500 Vac. In Walsin’s varistor export we counted 17 parts with a 275 Vac maximum working voltage, from 5 mm to 53 mm discs, the usual rung for 230 V mains. The S2 series adds 160 surface-mount X1/Y2 MLCC in Walsin’s MLCC export. We have not seen this cut counted anywhere else.

Appliance mains brief Walsin part Type Value / voltage Rating or class Match / mismatch with the brief
Y2 line-to-earth, 2.2 nF, 250 Vac mains YU0AC222M080 Disc, X1/Y2 2.2 nF ±20% X1 440 Vac / Y2 250 Vac Match
Y2 line-to-earth, 2.2 nF, extra voltage margin YU1AC222M080 Disc, X1/Y2 2.2 nF ±20% X1 440 Vac / Y2 300 Vac Match
Y2, 4.7 nF YU1AC472M120 Disc, X1/Y2 4.7 nF ±20% X1 440 Vac / Y2 300 Vac Match
Y2, 1 nF, ±10% YP1AC102K080 Disc, X1/Y2 1 nF ±10% X1 440 Vac / Y2 300 Vac Match
Y2, 2.2 nF, surface mount S252B222K502 MLCC, S2 series, 2211 2.2 nF ±10% X1/Y2 (S2 series) Match on class and value; on our shelf
MOV, 230 V mains, at least 4,500 A SR431K14D 14 mm disc 430 Vdc varistor voltage 275 Vac, 4,500 A Match
MOV, 230 V mains, at least 4,500 A SR431K10D 10 mm disc 430 Vdc varistor voltage 275 Vac, 2,500 A Mismatch: peak current below brief

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

Check the datasheet. Take the AC ratings, lead pitch and body size from Walsin’s safety-capacitor and varistor datasheets, and compare them with your certified part before any change.

What is on the shelf in Hong Kong for an appliance mains input?

One safety capacitor, plus the decoupling and resistor lines around it. We checked the 367 safety disc capacitors, 160 S2 safety MLCC and 379 varistors against our ready-stock snapshot dated 9 November 2026: one, the S2 series S252B222K502, is on our shelf in Hong Kong.

The same snapshot holds 245 Walsin MLCC and 191 Walsin chip resistors on our shelf in Hong Kong, which cover much of the low-voltage side of an appliance control board. The disc safety capacitors and varistors in the table are to order: request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote. “On our shelf in Hong Kong (snapshot 9 November 2026)” means held on that date, not a promise of quantity today.

How Venatech helps

How Venatech helps is a mains-input BOM with the safety parts named. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so an incumbent Y2 capacitor or varistor returns Walsin candidates with class, value and rating differences stated.

Paste your safety capacitors and varistors into the cross-reference tool, or upload the appliance board BOM and request a quote through the site. Browse the disc capacitor range and the MOV range. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve appliance makers in Noida, Chennai, Sri City, Pune and Bengaluru in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line. For anything about BIS certification, QCO scope or dates, confirm with your compliance team.

The short version

The BIS QCO for electrical appliances, notified on 6 April 2026, puts more than 90 appliance categories under IS 302 with the ISI mark, from 1 October 2026 for larger makers, 1 January 2027 for small and 1 April 2027 for micro enterprises, according to India Briefing and Agile Regulatory. Settle the safety parts on the mains input before testing: Walsin lists 186 X1/Y2 disc capacitors and 17 varistors at 275 Vac.

Send us the mains-input section of your appliance BOM, and we will return Walsin safety capacitors and varistors with every rating difference marked. Which safety part on that board has the fewest qualified sources today?

Related reading

Last reviewed: 19 November 2026

Sources

Fetched 19 November 2026.

  • India Briefing, “India Electrical Appliances QCO 2026: BIS Certification Guide for Foreign Manufacturers”, 29 April 2026: https://www.india-briefing.com/news/india-electrical-appliances-qco-2026-bis-certification-guide-for-foreign-manufacturers-44541.html
  • Agile Regulatory, “BIS revises QCO 2026 date: key update for manufacturers”, 31 October 2026: https://www.agileregulatory.com/latest-updates/bis-revises-qco-2026-date-key-update-for-manufacturers
  • Outlook Business, “Will India’s New Quality Control Reform Ease Imports or Create Fresh Hurdles?”, 27 June 2026: https://www.outlookbusiness.com/economy-and-policy/will-indias-new-quality-control-reform-ease-imports-or-create-fresh-hurdles
  • Walsin exports Venatech_DiscCap_Upload_01.xlsx, Venatech_MOV_Upload_01.xlsx and Venatech_MLCC_Upload_01.xlsx to _08, re-measured 19 November 2026; Walsin S2 safety MLCC datasheet (WTC_MLCC_Safety_Certified_S2.pdf); Venatech ready-stock snapshot dated 9 November 2026.

Frequently asked questions

When does the BIS QCO for electrical appliances apply in India?

Agile Regulatory reports 1 October 2026 for general manufacturers, 1 January 2027 for small enterprises and 1 April 2027 for micro enterprises under the 2026 order. Confirm the date for your business with your compliance team.

Which standard does the appliance QCO use?

India Briefing says the order applies IS 302 (Part 1): 2024, based on IEC 60335-1:2020, with BIS certification under Scheme I and the ISI mark.

Do capacitors and varistors need their own BIS certificate under this QCO?

The order certifies appliances, not components. Your certification body decides what evidence it wants for safety-critical parts, so ask it which component approvals it accepts.

How many Walsin Y2 safety capacitors are there?

We counted 186 Walsin X1/Y2 disc capacitors in the export, from 10 pF to 10 nF, plus 160 surface-mount X1/Y2 MLCC in the S2 series. Each X1/Y2 disc row lists UL, CSA, VDE/ENEC, CQC and KC approvals.

Which Walsin varistor suits 230 V mains in India?

Walsin lists 17 varistors with a 275 Vac maximum working voltage, from 5 mm to 53 mm. Choose the disc size by the surge current your design and standard call for, and confirm against the datasheet.

Is Venatech an authorised Walsin distributor for appliance makers in India?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves appliance makers in India in small lots. Walsin is the line we are authorised for; other brands we source on request.


Share This, Choose Your Platform!