NEWS

FCC Test Lab Rule and Vietnam: The 1 December 2028 Cut-Off, RF Re-Testing, and 908 Walsin 0402 RF Capacitors from Venatech, Authorised Walsin Distributor

Under the new FCC test lab rule, from 1 December 2028 only labs in the USA or in reciprocal economies can test RF devices for new FCC applications. For device makers in Vietnam planning re-tests, Walsin Technology (Walsin) lists 908 RF-series capacitors in 0402. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited wrote this for RF, hardware and compliance engineers, and the buyers who support them, at phone, IoT, networking and consumer-device makers in Vietnam. The FCC test lab rule is about where a radio device is tested, not about which capacitor sits on the board, and this post is perspective rather than legal or regulatory advice: confirm with your compliance team and your test lab how it applies to your products. What the rule does create is a wave of planned re-testing, and a re-test is the moment to look hard at the passive parts that set an antenna’s match. On 19 November 2026 we re-measured Walsin’s MLCC export (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, 23,360 part numbers) against our ready-stock snapshot dated 9 November 2026.

What does the FCC test lab rule say?

Only US or reciprocal-economy labs from 1 December 2028. DLA Piper wrote on 21 October 2026 that the FCC draft order ends recognition of RF device test labs in countries without a reciprocal agreement with the USA, after a transition period ending 1 December 2028; applications received on or after that date must rely on compliant testing.

DLA Piper also wrote that certifications granted before 1 December 2028 would stay valid, and that roughly five of every six RF devices are currently tested in non-reciprocal economies. GovInfoSecurity reported on 29 October 2026 that the commissioners voted for the rule, and that FCC Chair Brendan Carr said China handles 82.3 percent of testing for devices seeking FCC approval. Global Sanctions wrote on 2 November 2026 that the FCC adopted the final rule and that existing certifications are unaffected. How each of your filings is affected is a question for your compliance team.

Why does the FCC test lab rule matter to device makers in Vietnam?

Because Vietnam ships a great many radios to the USA. VOV reported on 9 November 2026 that Vietnam’s electronics exports reached 207 billion US dollars in January to October 2026, including 149.4 billion US dollars of computers, electronic products and components and 57.6 billion US dollars of phones and components.

The STR Trade Report listed 62 economies on 5 November 2026 that currently give US labs reciprocal recognition, and Vietnam is among them, alongside Japan, South Korea, Taiwan and Hong Kong; STR notes that the list reflects current status and may change. For a Vietnamese brand or EMS customer whose FCC testing has been done elsewhere, the practical effect is planning: which new models need applications after 1 December 2028, which lab will test them, and whether any board revision is due before that test. Our guide on choosing an RF chip filter by band covers the filter side of the same boards.

Which passives should be locked before an FCC re-test?

The parts that set the RF match and the emissions. On a typical 2.4 GHz or sub-6 GHz radio, the 0402 and 0201 C0G capacitors and chip inductors in the antenna matching network move the tuned frequency by a measurable amount when their value or tolerance changes by a few tenths of a picofarad.

Three checks are worth doing before a board goes to the lab. First, tolerance: a matching capacitor at ±0.05 pF and one at ±0.25 pF are not interchangeable, even at the same nominal value. Second, series: Walsin’s Microwave (RF) and High Q (HH) series are specified for RF use, while a general-purpose C0G part of the same value is built to a different brief. Third, a second source: if you intend to qualify an alternative capacitor later, ask your test lab now whether that change would need a permissive change filing or a new test. Our notes on high-Q, low-ESR MLCC for RF and inductors for RF matching networks cover the selection detail.

How many Walsin RF capacitors fit an 0402 matching network?

908 in the RF series alone. We parsed all 23,360 rows of Walsin’s MLCC export and counted 3,615 distinct part numbers in the Microwave Caps (RF series), of which 908 are 0402, 781 are 0603 and 763 are 0201; the High Q & Low ESR (HH) series adds 508 more in 0402.

Walsin series 0201 0402 0603 0805 Other cases Total part numbers
Microwave Caps (RF series) 763 908 781 626 537 3,615
High Q & Low ESR Caps (HH series) 217 508 514 463 0 1,702

The RF series also runs into 01R5, 0505 and 1111 cases for tight or high-power layouts. In Venatech_MLCC_Upload_01.xlsx to _08, 3,511 of the 3,615 RF-series parts are C0G/NP0 and 104 are X8G, and the 0402 parts that list a thickness give 0.50 ±0.05 mm. We have not seen this series split counted anywhere else. Browse the full MLCC range by series. Take final Q, ESR and self-resonance figures from Walsin’s RF and HH datasheets, not from the export alone.

Which Walsin RF capacitors are on the shelf in Hong Kong?

Six RF-series parts. We checked the RF and HH series against our ready-stock snapshot dated 9 November 2026: six RF-series capacitors are on our shelf in Hong Kong, five in 0402 and one in 0201, all C0G/NP0, from 0.8 pF to 4.7 pF.

Matching-network brief Walsin part Case Capacitance Tolerance Rated V Match / mismatch with the brief
0.8 pF, ±0.05 pF, 0402 RF15N0R8A500 0402 0.8 pF ±0.05 pF 50 V Match
0.8 pF, ±0.05 pF, 0402 RF15N0R8B500 0402 0.8 pF ±0.1 pF 50 V Mismatch: looser tolerance; use the A-code part
1.1 pF, ±0.1 pF, 0402 RF15N1R1B500 0402 1.1 pF ±0.1 pF 50 V Match
1.2 pF, ±0.1 pF, 0402 RF15N1R2B500 0402 1.2 pF ±0.1 pF 50 V Match
3.0 pF, ±0.1 pF, 0402 RF15N3R0B500 0402 3.0 pF ±0.1 pF 50 V Match
4.7 pF, ±0.1 pF, 0201, 50 V RF03N4R7B250 0201 4.7 pF ±0.1 pF 25 V Mismatch: 25 V rating; check it against your rail
2.4 pF, ±0.05 pF, 0402, high Q HH15N2R4A500 0402 2.4 pF ±0.05 pF 50 V Match; to order through our authorised Walsin channel

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

“On our shelf in Hong Kong (snapshot 9 November 2026)” means held on that date, not a promise of quantity or date code today. Everything else in the RF and HH series is to order: request a quote and we source it through our authorised Walsin channel, confirming availability, date code and lead time on each quote.

Check the datasheet. The export lists value, tolerance, voltage and thickness, not Q or self-resonant frequency. Compare those on Walsin’s RF and HH datasheets with your incumbent part before the board goes to the lab.

How Venatech helps

How Venatech helps is a checked bill of RF passives before the test slot. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so an incumbent matching capacitor returns Walsin RF or HH candidates with every field difference stated.

Paste your RF capacitors and inductors into the cross-reference tool, or upload the radio board’s BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve Bac Ninh, Bac Giang, Thai Nguyen, Hai Phong and Ho Chi Minh City in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line. For anything about FCC filings, test labs or permissive changes, confirm with your compliance team.

The short version

The FCC test lab rule means that from 1 December 2028, new FCC applications must rely on testing at labs in the USA or in a reciprocal economy, with existing certifications left valid, according to DLA Piper and Global Sanctions. Vietnam is on the reciprocal list STR published on 5 November 2026. Before a re-test, lock the matching-network passives: Walsin lists 908 RF-series capacitors in 0402, and six RF-series parts were on our shelf in Hong Kong on 9 November 2026.

Send us the RF section of your BOM, and we will return Walsin RF and HH candidates with tolerance and voltage stated. Which matching capacitor would you most like a second source for before your next lab slot?

Related reading

Last reviewed: 19 November 2026

Sources

Fetched 19 November 2026.

  • DLA Piper, “FCC to vote on limiting equipment authorization testing”, 21 October 2026: https://www.dlapiper.com/en/insights/publications/2026/10/fcc-to-vote-on-limiting-equipment-authorization-testing
  • GovInfoSecurity, “US FCC votes to cut off device testing in China by 2028”, 29 October 2026: https://www.govinfosecurity.com/us-fcc-votes-to-cut-off-device-testing-in-china-by-2028-a-33251
  • Global Sanctions, “US adopts rule restricting imports of electronic devices tested outside the USA”, 2 November 2026: https://globalsanctions.com/2026/11/us-adopts-rule-restricting-imports-of-electronic-devices-tested-outside-the-usa/
  • STR Trade Report, “FCC limits foreign testing of electronic devices”, 5 November 2026: https://www.strtrade.com/trade-news-resources/str-trade-report/november/fcc-limits-foreign-testing-of-electronic-devices
  • VOV, report on electronics exports in the first 10 months of 2026, 9 November 2026: https://english.vov.vn/en/economy/electronics-exports-hit-us207-billion-in-first-10-months-post1348639.vov
  • Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 19 November 2026; Venatech ready-stock snapshot dated 9 November 2026.

Frequently asked questions

When does the FCC test lab rule take effect for Vietnam device makers?

DLA Piper reported that non-reciprocal labs stay recognised until 1 December 2028, and that applications received on or after that date must rely on testing at US or reciprocal-economy labs. Confirm your own filings with your compliance team.

Is Vietnam a reciprocal economy under the FCC test lab rule?

The STR Trade Report’s list of 62 reciprocal economies, published on 5 November 2026, includes Vietnam, and STR notes the list may change. Check the FCC’s current list before you book a lab.

Do existing FCC certifications stay valid?

According to DLA Piper and Global Sanctions, certifications granted before 1 December 2028 remain valid. New applications after that date are the ones affected.

Does changing a matching capacitor need a new FCC test?

That depends on the change and the device; ask your test lab or certification body whether it needs a permissive change. Lock the RF passives, including tolerance, before the test to keep the question simple.

How many Walsin RF capacitors are available in 0402?

We counted 908 Walsin RF-series MLCC in 0402 in the export, plus 508 High Q (HH) series parts. Six RF-series parts were on our shelf in Hong Kong on 9 November 2026.

Is Venatech an authorised Walsin distributor for buyers in Vietnam?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Vietnam in small lots. Walsin is the line we are authorised for; other brands we source on request.


Share This, Choose Your Platform!