Urgent component sourcing for the Philippines starts with one clear request: Venatech Limited, an authorised Walsin distributor in Hong Kong, lists 148 Walsin middle to high voltage MLCC part numbers from 200 V to 3 kV as ready stock as at 9 November 2026, and sources other passive brands on request for a line-down spot buy.
This post is for the buyer, planner or production manager in the Philippines who has just been told a line will stop because one capacitor or resistor has not arrived. It sets out what to do in the first hour, how a spot buy through Venatech works, and which Walsin Technology (Walsin) high voltage MLCC we counted on our Hong Kong ready-stock list as at 9 November 2026. We matched each listed part to Walsin’s parametric data in our catalogue files (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx) and fetched the trade figure below on 13 November 2026.
Why does one short passive part matter so much to a Philippine electronics plant?
Because electronics carries the country’s export book. Context.ph reported on 22 October 2026 that electronics shipments of 6.20 billion US dollars made up 71.4 percent of Philippine merchandise exports, and that SEIPI said local manufacturers supply critical components to American companies.
At that weight, a board that cannot ship is a customer delivery missed, and a passive part costing a fraction of a cent can be the cause. Capacitors and resistors sit on every board in the hundreds, so a single missing value, a reel that failed incoming inspection or an allocation on one case size can hold up a whole build. The report covers the industry, not any one plant; we say nothing about any company’s supply position.
What should a buyer do in the first hour when a line is short of a passive part?
Pin down five facts before calling anyone. A spot buy moves fastest when the request names the exact part number, the manufacturer, the quantity needed to bridge the gap, the date your next scheduled delivery lands and whether the customer’s approved vendor list allows a cross to another brand.
- Part number and manufacturer. Copy them from the BOM, not from memory. One wrong letter changes voltage or tolerance.
- Bridge quantity. The quantity to cover the days until your contracted delivery, plus a margin for set-up loss, not a full year.
- Need-by date and delivery point. The plant, the zone and the forwarder you use.
- AVL status. Whether a Walsin cross can be used now, needs customer approval, or is not allowed. If the original brand is mandatory, say so.
- Documents. Certificate of conformance, date code limits and packaging (reel, cut tape) your incoming inspection requires.
Then send one request rather than ten calls. Our note on buffer stock that protects a BOM line through constraint covers how to avoid the next one.
How does urgent component sourcing work through Venatech for a plant in the Philippines?
Two routes, run in parallel from Hong Kong. For Walsin parts we check our Hong Kong ready-stock list and the authorised Walsin channel; for Murata, Samsung, TDK, Yageo, Vishay, KOA, Panasonic and other brands we search the stock we can access through our supplier network in Hong Kong, and we reply with what we can confirm.
Send the line through the request-a-quote form, or upload the whole shortage list at /bom/. Each quote states the manufacturer, the part number offered, the quantity, the date code and the lead time, and whether the part is a Walsin cross or the original brand. If the original brand is mandatory and a Walsin cross is not, say so and we search only for the original. We do not promise stock, price or delivery before the quote is issued, and we do not use urgency to sell: if we cannot confirm a source, we say that. For parts from the open network, plan the incoming inspection your quality system requires; that judgement is yours and your customer’s.
Which Walsin 200 V to 3 kV MLCC lines are on the Hong Kong list?
148 of them, in six case sizes. We counted 148 Walsin Middle to High Voltage Caps part numbers on our ready-stock list as at 9 November 2026: 8 in 0603, 35 in 0805, 46 in 1206, 17 in 1210, 12 in 1808 and 30 in 1812, of which 91 are X7R and 57 are C0G.
By rated voltage the 148 run from 200 V to 3,000 V, which covers the snubber, primary-side and LED-driver capacitors common on power boards built in Calabarzon and Cebu. Ten of the 148 are on our own Hong Kong shelf; the rest is Walsin stock we can access through our Hong Kong network, and each quote says which.
| Rated voltage | Walsin MLCC lines on the list |
|---|---|
| 200 V | 11 |
| 250 V | 32 |
| 450 V and 500 V | 19 |
| 630 V | 26 |
| 1,000 V | 34 |
| 1,500 V to 3,000 V | 26 |
Which stocked Walsin parts match common power-board capacitor briefs?
Seven of eight briefs match a listed part. We checked eight common power-board briefs against the ready-stock list as at 9 November 2026; seven matched a Walsin part on every field we compared, and one matched on value but sits one voltage step below the brief, with a larger stocked option.
| Brief | Walsin part on the list | Size | Dielectric | Value | Tol. | Rated voltage | Held | Match / mismatch with the brief |
|---|---|---|---|---|---|---|---|---|
| 100 nF, X7R, 1206, 250 V | 1206B104K251 |
1206 | X7R | 100 nF | 10% | 250 V | Network stock | Match |
| 10 nF, X7R, 1206, 1 kV | 1206B103K102 |
1206 | X7R | 10 nF | 10% | 1,000 V | Network stock | Match |
| 1 nF, X7R, 0805, 1 kV | 0805B102K102 |
0805 | X7R | 1,000 pF | 10% | 1,000 V | Network stock | Match |
| 10 nF, X7R, 0805, 250 V | 0805B103K251 |
0805 | X7R | 10 nF | 10% | 250 V | Network stock | Match |
| 4.7 nF, X7R, 1206, 250 V | 1206B472K251 |
1206 | X7R | 4,700 pF | 10% | 250 V | Venatech shelf | Match |
| 220 nF, X7R, 1210, 250 V | 1210B224K251 |
1210 | X7R | 220 nF | 10% | 250 V | Network stock | Match |
| 100 nF, X7R, 1812, 630 V | 1812B104K631 |
1812 | X7R | 100 nF | 10% | 630 V | Network stock | Match |
| 100 nF, X7R, 0805, 250 V | 0805B104K201 |
0805 | X7R | 100 nF | 10% | 200 V | Network stock | Mismatch: 200 V, one step below; 1206B104K251 is the 250 V option on the list |
High voltage X7R loses capacitance under DC bias, so check Walsin’s datasheet curve at your working voltage, and confirm creepage and safety approvals separately: a general MLCC is not a safety-certified X or Y capacitor. Qualify any cross in your application before production.
How does Venatech help a Philippine plant with a line-down part?
How Venatech helps: one request, two routes, a straight answer. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes 18 manufacturers’ part numbers and crosses 800,000+ parts to Walsin, and our supplier network in Hong Kong sources other passive brands on request.
Cross the short line in the cross-reference tool, upload the shortage list at /bom/, check the ready-stock list and browse the MLCC range. We quote small lots for a bridge quantity, serve from Hong Kong and confirm availability, date code and lead time on each quote. Customs and zone documentation are for your broker and compliance team to confirm. See also crossing a whole BOM when the shortage is more than one line.
The short version
Context.ph reported on 22 October 2026 that electronics made up 71.4 percent of Philippine merchandise exports in the figures it cited. When one passive part stops a line, send the part number, manufacturer, bridge quantity, need-by date and AVL status in one request. Our Hong Kong list as at 9 November 2026 holds 148 Walsin 200 V to 3 kV MLCC lines, and we source other brands on request.
Send us the short line now, with the quantity and need-by date, and we will reply with what we can confirm.
Related reading
- Building a BOM that survives a shortage
- Cross straight into Hong Kong ready stock
- When not to cross: cases where you keep the original
- Free cross-reference tool and ready-stock list
Last reviewed 13 Nov 2026.
Sources
Fetched 13 November 2026.
- Context.ph, “Philippine electronics exports strengthen US supply chains amid weak peso”, 22 October 2026: https://context.ph/2026/10/22/philippine-electronics-exports-strengthen-us-supply-chains-amid-weak-peso/
- Venatech ready-stock list as at 9 November 2026, matched to Walsin’s parametric data in Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx.
- Walsin Middle to High Voltage MLCC datasheet, passivecomponent.com.
Frequently asked questions
Can Venatech help with urgent component sourcing in the Philippines?
Yes. Send the part number, manufacturer, quantity and need-by date through the request-a-quote form or /bom/. We check Walsin stock through our authorised channel and other brands through our supplier network in Hong Kong, and reply with what we can confirm.
Which brands can you source for a line-down spot buy?
Walsin through our authorised channel, and on request most passive-component brands, including Murata, Samsung, TDK, Yageo, Vishay, KOA and Panasonic. Walsin is the line we are authorised for.
How many Walsin high voltage MLCC lines are on the list?
We counted 148 Walsin Middle to High Voltage Caps part numbers, 200 V to 3,000 V, on our Hong Kong ready-stock list as at 9 November 2026.
Do you have a 100 nF 250 V 1206 X7R capacitor?
1206B104K251, a Walsin 1206 X7R 100 nF 10 percent 250 V MLCC, is on the list as at 9 November 2026. We confirm quantity and date code on the quote.
Can you guarantee delivery to stop a line-down?
No. We confirm availability, date code and lead time on each quote and make no promise before then. If we cannot confirm a source, we tell you.
Can I use a Walsin cross if my customer has an approved vendor list?
Only if your customer approves it. VenaMatch shows each field match or mismatch for the approval file; if the original brand is mandatory, ask us to source the original.