NEWS

High Temperature MLCC for Memory Test Boards in South Korea’s Cheongju: 128 Walsin HT Parts Rated to 150 C

A high temperature MLCC is rated to 150 C rather than the 125 C of an X7R part, which matters on burn-in and hot-test boards. Walsin’s HT series lists 128 of them, 102 in X8G and 26 in X8R, from 0402 to 1210, for memory test work in Cheongju, South Korea. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for engineers and buyers at semiconductor test, burn-in board, probe card and equipment suppliers in Cheongju, North Chungcheong Province, South Korea. Walsin Technology (Walsin) is the line we are authorised for. We counted every part rated to 150 C in our MLCC upload files, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx (23,360 distinct part numbers), on 16 November 2026, and checked the result against our ready stock snapshot dated 9 November 2026.

What is SK hynix building in Cheongju?

A packaging and test fab for high-bandwidth memory, beside a new DRAM fab. The Korea Times reported on 13 January 2026 that SK hynix confirmed a 19 trillion won advanced packaging fab, P&T7, on a 230,000 square metre site in Cheongju, with construction from April 2026 and completion targeted for the end of 2027, to package and test HBM.

The same report said the 20 trillion won M15X fab in Cheongju, also for HBM, opened its cleanroom in October 2025 and is in the final stages of equipment installation, and that the city already hosts the M15, M11, M12 and P&T3 sites. Those are the company’s figures as reported, not ours. A packaging and test fab is where chips are stressed and screened, so it creates steady demand for test boards, burn-in boards, sockets and handler electronics, much of it built by local suppliers. We make no statement about which suppliers any memory maker uses.

Why do memory test and burn-in boards need a high temperature MLCC?

Because the board sits in the oven with the chips. Burn-in and hot-test boards hold devices at elevated temperature for hours, so capacitors near the sockets can run above the 125 C ceiling of X7R and X5R parts; an X8R or X8G part is characterised to 150 C, giving margin where the board, not just the device, is hot.

X8R is a Class II dielectric like X7R: capacitance can change by up to 15 percent across its range, and it loses some value under DC bias, but it holds that limit out to 150 C. X8G is a Class I dielectric, stable like C0G, and suits timing, filter and reference positions on a hot board. Above the rated temperature an MLCC’s insulation resistance falls and its life shortens, so the rating is a design limit, not a guideline. Our post on high temperature MLCC to 150 C explains the codes, and MLCC DC bias and voltage derating covers the bias loss.

How many high temperature MLCC does Walsin list?

235 parts rated to 150 C, 128 of them in the dedicated HT series. We counted 235 distinct Walsin MLCC rated to 150 C in our export: 128 in the High Temperature (HT) series, 104 in X8G within the RF microwave series and 3 in the AEC-Q200 MT series.

HT case size X8G parts X8R parts X8G capacitance span X8R capacitance span
0402 7 0 2.2 pF to 470 pF none
0603 23 8 1 pF to 3.3 nF 100 pF to 10 nF
0805 28 9 1 pF to 10 nF 100 pF to 47 nF
1206 24 9 1.5 pF to 10 nF 220 pF to 100 nF
1210 20 0 10 pF to 15 nF none

All 128 HT parts carry the minus 55 C to plus 150 C range in Walsin’s own export, 67 rated 100 V and 61 rated 50 V. The HT range reaches 100 nF in HT31R104K500, 1206 X8R at 50 V. Bulk decoupling above that is a job for a separate, cooler part of the board or for a higher-rated part checked against the oven profile.

Which Walsin parts answer a 10 nF, 0805, 50 V, 150 C brief?

Two exact HT matches in 0805. For 10 nF, 0805, 50 V, rated to 150 C, we found HT21R103K500 in X8R and HT21G103J500 in the more stable X8G, plus 10 nF HT options in 0603, 1206 and 1210; the X7R parts at the same value stop at 125 C.

Brief: 10 nF, 0805, 50 V, 150 C Walsin part Dielectric Match / mismatch Your incumbent
Class II, as briefed HT21R103K500 X8R, 10% Match
Class I, tighter HT21G103J500 X8G, 5% Match; more stable with bias
Smaller body HT18R103K500 X8R, 10% Match in 0603
Higher rating HT31G103J101 X8G, 5% Match in 1206 at 100 V; larger footprint
General purpose X7R 0805B103K500 X7R, 10% Mismatch: 125 C
Automotive X7R MT21B103K500 X7R, 10% Mismatch: 125 C, though AEC-Q200

Leave the last column for your current part and compare temperature characteristic and thickness against both datasheets. Our guide on how to cross-reference an MLCC lists the fields in the order to check them.

Which Walsin high temperature MLCC are on the Hong Kong shelf?

Two HT lines. We checked all 128 HT part numbers against our ready stock snapshot dated 9 November 2026: HT21G331K500 at 330 pF and HT21G472K500 at 4.7 nF, both 0805 X8G at 50 V, are on our shelf in Hong Kong (snapshot 9 Nov 2026).

The other HT lines, including the two 10 nF matches above, are to order: request a quote and we source them through our authorised Walsin channel. For the cooler parts of the same board, the general purpose 0805B103K500 and 0805B103J500 at 10 nF are also on the snapshot. The ready stock list is a dated snapshot and stock moves; we confirm availability, date code and lead time on each quote. The MLCC range page shows every Walsin series.

How Venatech helps

Cross the hot-zone capacitors on a test board in one paste. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and its high temperature filter narrows a list to parts like the 128 HT lines in this post.

Paste the capacitor lines from your burn-in or test board into the cross-reference tool, set the special requirement to high temperature, and every difference from your original is stated. For a full board, upload the BOM at /bom/ and request a quote through the site. We serve South Korea from Hong Kong in small lots, which suits test-board builds that run in tens rather than thousands, and the design decisions stay with you.

The short version

  • SK hynix confirmed a 19 trillion won HBM packaging and test fab, P&T7, in Cheongju, due for completion at the end of 2027 (The Korea Times, 13 January 2026).
  • Walsin lists 235 MLCC rated to 150 C, 128 of them in the HT series: 102 X8G and 26 X8R, from 0402 to 1210.
  • A 10 nF, 0805, 50 V, 150 C brief returns HT21R103K500 and HT21G103J500.
  • Two HT lines are on our shelf in Hong Kong (snapshot 9 Nov 2026), HT21G331K500 and HT21G472K500.

Send us the capacitor lines from your Cheongju burn-in or test board and we will return the Walsin crosses with every difference stated. What is the hottest point your board sees in the oven?

Related reading

Last reviewed: 16 November 2026

Sources

Fetched 16 November 2026.

  • The Korea Times, SK hynix confirms packaging fab construction in Cheongju, 13 January 2026: https://www.koreatimes.co.kr/business/tech-science/20260113/sk-hynix-confirms-13-bil-packaging-fab-construction-in-cheongju
  • Venatech MLCC upload files Venatech_MLCC_Upload_01.xlsx to _08.xlsx and ready stock snapshot dated 9 November 2026, re-measured 16 November 2026.

Frequently asked questions

What is a high temperature MLCC?

A ceramic capacitor characterised to work above the usual 125 C, typically to 150 C with an X8R or X8G code. Walsin’s HT series lists 128 such parts in our count of 16 November 2026.

What is the difference between X8R and X8G?

X8R is Class II, like X7R, with up to 15 percent capacitance change to 150 C. X8G is Class I, stable like C0G, and suits timing and filter positions.

Which Walsin part crosses a 10 nF, 0805, 50 V, 150 C capacitor?

HT21R103K500 in X8R, or HT21G103J500 in X8G at 5 percent. Confirm thickness and the temperature characteristic against both datasheets.

How high does Walsin’s HT series go in capacitance?

100 nF, as HT31R104K500 in 1206 X8R at 50 V. Larger values on a hot board need a separate check against the oven profile.

Does Venatech stock high temperature MLCC in Hong Kong?

Two HT lines, HT21G331K500 and HT21G472K500, are on our ready stock snapshot dated 9 November 2026. Other HT lines are sourced on request through our authorised Walsin channel.

Can Venatech supply test-board makers in Cheongju, South Korea?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots into South Korea. Use the free cross-reference tool or upload a BOM; confirm import rules with your compliance team.


Share This, Choose Your Platform!