A low profile MLCC trades some capacitance for height, so it fits under shields, beside dies and inside height-limited modules. Walsin’s TT series lists 56 of them, four at 0.3 mm in 0402 and up to 47 uF at 0.85 mm in 1206, for packaging and module builds in Kaohsiung, Taiwan. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for package, module and board engineers and for component buyers at packaging, substrate and test suppliers in Kaohsiung, southern Taiwan. Walsin Technology (Walsin) is the line we are authorised for. We counted the Low Profile (TT) series and its standard-height neighbours in our MLCC upload files, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx (23,360 distinct part numbers), on 16 November 2026, and checked them against our ready stock snapshot dated 9 November 2026.
What is being built for advanced packaging in Kaohsiung’s Nanzih park?
A joint advanced-packaging hub for AI chips. I-Connect007 reported on 8 May 2026 that ASE and WUS announced a strategic collaboration to build an advanced AI packaging hub in the Nanzih Technology Industrial Park, Kaohsiung, with a total investment of about 35 billion New Taiwan dollars, over 2,000 jobs and completion scheduled for September 2029.
The report said the hub will focus on FOCoS and flip-chip ball grid array (FCBGA) packaging, in a factory of more than 113,000 square metres with its own 161 kV substation. Those are the companies’ figures as reported, not ours. Advanced packaging pulls a cluster of work around it: substrate and module assembly, test boards, burn-in and handler electronics, and the engineering samples that come before volume. Many of those designs are short of height, which is where a thin capacitor earns its place. We make no statement about which suppliers either company uses.
Where does a low profile MLCC earn its place in packaging and module work?
Anywhere the vertical gap is fixed and smaller than a standard part. A standard 1 uF 0402 X5R MLCC from Walsin is 0.50 mm tall, and a standard 10 uF 0805 part is 1.25 mm; the TT versions are 0.30 mm and 0.85 mm, which can be the difference between fitting under a lid, shield or heat spreader and not fitting at all.
Typical positions include decoupling placed close to a die or package where a lid or stiffener sets the ceiling, capacitors on the underside of a module that must clear the motherboard, and parts under RF shields on compact boards. A thinner part also has a smaller body volume, so it usually gives up voltage or capacitance compared with its standard sibling. Check the thickness tolerance as well as the nominal: TT 0402 parts are specified at 0.30 mm plus or minus 0.03 mm. Our post on low profile MLCC and the TT series covers the range, and thickness and tolerance explains why cross tools ask for both fields.
How many low profile MLCC does Walsin list, and how thin are they?
- We counted 56 distinct TT part numbers in our export, 51 in X5R and 5 in X7R, from 220 nF to 47 uF; four 0402 parts are 0.30 mm thick, two 0603 parts are 0.50 mm, and most 0805 and 1206 parts are 0.85 mm.
| Case size | TT parts | Stated thickness | Standard-height sibling, for scale |
|---|---|---|---|
| 0402 | 4 | 0.30 mm | 0.50 mm for a 1 uF X5R part |
| 0603 | 2 | 0.50 mm | 0.80 mm class for standard 0603 |
| 0805 | 26 | 0.85 mm | 1.25 mm for a 10 uF X5R part |
| 1206 | 20 | 0.85 mm (17), 1.15 mm (3) | thicker standard parts at the same value |
| 1210 | 3 | see datasheet | thicker standard parts at the same value |
The four 0402 parts are TT15X105K6R3 and TT15X105M6R3 at 1 uF, 6.3 V, and TT15X224K250 and TT15X474K250 at 220 nF and 470 nF, 25 V. At the other end, TT31X476M6R3 carries 47 uF at 6.3 V in a 1206 body 0.85 mm tall. We have not seen this thickness split counted anywhere else.
Which Walsin parts answer a 1 uF, 0402, 0.33 mm brief?
One exact match at 10 percent. For 1 uF, X5R, 0402, 6.3 V, 10 percent and a 0.33 mm ceiling, TT15X105K6R3 matches at 0.30 mm; TT15X105M6R3 fits the height at 20 percent, and the standard 0402 parts at 1 uF fail only on height.
| Brief: 1 uF, X5R, 0402, 6.3 V, 10%, 0.33 mm max | Walsin part | Thickness | Match / mismatch | Your incumbent |
|---|---|---|---|---|
| Low profile, as briefed | TT15X105K6R3 |
0.30 mm | Match | |
| Low profile, wider tolerance | TT15X105M6R3 |
0.30 mm | Mismatch: 20 percent | |
| Standard X5R | 0402X105K6R3 |
0.50 mm | Mismatch: too tall | |
| Standard X7R | 0402B105K6R3 |
0.50 mm | Mismatch: too tall; X7R | |
| Standard X6S | 0402S105K6R3 |
0.50 mm | Mismatch: too tall; X6S | |
| Soft termination | SH15X105K6R3 |
0.50 mm | Mismatch: too tall |
The same pattern holds in 0805 at 10 uF: TT21X106K6R3 is 0.85 mm against 1.25 mm for the standard 0805X106K6R3. Leave the last column for your current part and check the DC bias curve, because a thin X5R part at 6.3 V can lose a large share of its value at its working voltage. See MLCC DC bias and voltage derating.
Which related Walsin parts are on the Hong Kong shelf?
The standard-height siblings. The 56 TT lines are to order, so request a quote and we source them through our authorised Walsin channel; their standard-height siblings 0402X105K6R3, 0402B105K6R3, 0402S105K6R3 and 0805X106K6R3 are on our shelf in Hong Kong (snapshot 9 Nov 2026).
That split suits a common development path: a standard-height part from the shelf for a first board where height is not yet critical, and the TT part on order for the build that goes under the lid, planned and documented by your own engineering team. We checked all 56 TT part numbers against the snapshot dated 9 November 2026. The ready stock list is a dated snapshot and stock moves; we confirm availability, date code and lead time on each quote. The MLCC range page shows every Walsin series.
How Venatech helps
Find the thin part in one paste. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and its low profile filter narrows a list to parts like the 56 TT lines in this post.
Paste your capacitor lines into the cross-reference tool, set the special requirement to low profile, and every difference from your original is stated, thickness included. For a full module or test-board BOM, upload it at /bom/ and request a quote through the site. We serve Taiwan from Hong Kong in small lots, which suits engineering samples and pilot builds, and qualification stays with you.
The short version
- ASE and WUS plan an advanced AI packaging hub in Kaohsiung’s Nanzih park, about 35 billion New Taiwan dollars, due by September 2029 (I-Connect007, 8 May 2026).
- Walsin’s TT series lists 56 low profile MLCC, 51 X5R and 5 X7R, from 220 nF to 47 uF.
- Four 0402 TT parts are 0.30 mm thick;
TT15X105K6R3matches a 1 uF, 6.3 V, 0.33 mm brief. - Standard-height siblings such as
0402X105K6R3and0805X106K6R3are on our shelf in Hong Kong (snapshot 9 Nov 2026).
Send us the capacitor lines and the height limit from your Kaohsiung package, module or test board, and we will return the Walsin crosses with every difference stated. What is the tallest part your lid or shield will clear?
Related reading
- Low profile MLCC: the TT series
- Decoupling at the package: why case size beats capacitance
- Thickness and tolerance: the two fields every cross tool asks you to check
- Free cross-reference tool, BOM upload and ready stock snapshot
Last reviewed: 16 November 2026
Sources
Fetched 16 November 2026.
- I-Connect007, ASE and WUS announce strategic collaboration to build advanced AI packaging hub in Kaohsiung, 8 May 2026: https://iconnect007.com/article/149942/ase-wus-announce-strategic-collaboration-to-build-advanced-ai-packaging-hub-in-kaohsiung/149939/smt
- Venatech MLCC upload files Venatech_MLCC_Upload_01.xlsx to _08.xlsx and ready stock snapshot dated 9 November 2026, re-measured 16 November 2026.
Frequently asked questions
What is a low profile MLCC?
A ceramic capacitor built thinner than the standard part of the same case size, for height-limited positions. Walsin’s TT series lists 56 such parts in our count of 16 November 2026.
How thin are Walsin’s TT series 0402 capacitors?
0.30 mm, plus or minus 0.03 mm, across four parts: TT15X105K6R3 and TT15X105M6R3 at 1 uF, and TT15X224K250 and TT15X474K250 at 25 V.
Which Walsin part crosses a 1 uF, 0402, 6.3 V low profile capacitor?
TT15X105K6R3, X5R at 10 percent and 0.30 mm. Confirm thickness tolerance and the DC bias curve against both datasheets.
Does a low profile MLCC lose capacitance compared with a standard one?
At the same value, no, but the thinner body often limits the voltage rating, and X5R parts lose a share of their value under DC bias. Check the bias curve at your working voltage.
Does Venatech stock low profile MLCC in Hong Kong?
The TT lines are sourced on request through our authorised Walsin channel. Their standard-height siblings, such as 0402X105K6R3 and 0805X106K6R3, are on our ready stock snapshot dated 9 November 2026.
Can Venatech supply packaging and module makers in Kaohsiung, Taiwan?
Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots into Taiwan. Use the free cross-reference tool or upload a BOM; confirm import rules with your compliance team.