NEWS

Decoupling Capacitor Choices for India’s Dholera Chip-Fab Era: 336 Walsin 100 nF MLCC, 26 on the Hong Kong Shelf

The 100 nF decoupling capacitor sits beside every power pin of the microcontrollers and PMICs that India’s Dholera fab plans to make. We counted 336 Walsin MLCC at 100 nF, from 01005-class to 2225, 58 of them AEC-Q200, and 26 are on our shelf in Hong Kong. Venatech is the authorised Walsin distributor in Hong Kong, serving India.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for hardware engineers and buyers in Gujarat and across India who design boards around microcontrollers, power-management ICs and display drivers. Walsin Technology (Walsin) is the line we are authorised for. We filtered our MLCC upload files, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx (23,360 distinct part numbers), to a capacitance of exactly 100 nF on 16 November 2026, and checked the result against our ready stock snapshot dated 9 November 2026. Every part number below is real.

What will the Dholera fab make, and when?

Mature-node chips for cars, phones and communications, with commercial output now expected in 2028. Tom’s Hardware reported on 17 May 2026 that Tata Electronics’ Dholera fab is an 11 billion US dollar, 300 mm project targeting 50,000 wafers a month, aimed at power-management ICs, display drivers, microcontrollers and logic.

TrendForce, citing Bloomberg on 20 July 2026, reported that production will start mainly at 90 nm, that Tata describes a 28 nm to 110 nm range starting with 55 nm and 90 nm, and that India’s technology minister now expects commercial operations in mid-2028. Tata’s partner is Taiwan’s PSMC. Those are the publications’ figures, not ours. For a board designer the lesson is practical: the chips most likely to come from Dholera are exactly the parts that need a ring of 100 nF decoupling capacitors on every supply pin, and the boards that use them will be designed in India well before the first local wafers ship. We make no claim about any company’s suppliers.

How many 100 nF decoupling capacitors does Walsin list?

  1. We counted 336 Walsin MLCC at exactly 100 nF: 268 in X7R, 30 in X5R, 24 in C0G and 14 in X6S, X7S or X8R, from 4 V to 1.5 kV, and 58 in the AEC-Q200 MT and ST series.
Case size 100 nF parts Highest rated voltage
01R5 (01005 class) 5 10 V
0201 21 25 V
0402 51 50 V
0603 49 100 V
0805 44 200 V
1206 63 450 V
1210 40 630 V
1812 37 1 kV
1825, 2220, 2225 26 1.5 kV

The pattern is the one a designer expects but rarely sees counted: every step up in case size buys roughly double the voltage at the same 100 nF. In 0402, the usual decoupling size, 36 of the 51 parts are X7R, 13 are X5R and 2 are X6S, rated from 4 V to 50 V. We have not seen this 100 nF split counted anywhere else.

Which Walsin part crosses a 100 nF, 16 V, 0402 X7R decoupling capacitor?

Several, in four series. For 100 nF, 16 V, X7R, 10 percent in 0402 we found four direct Walsin answers, 0402B104K160, MT15B104K160, ST15B104K160 and SH15B104K160, plus nearby lines that differ in one field.

Brief: 100 nF, 16 V, X7R, 10 percent, 0402 Walsin part Series Match / mismatch Your incumbent
General purpose 0402B104K160 General purpose Match; on our shelf
Automotive MT15B104K160 MT, AEC-Q200 Match, adds AEC-Q200
Automotive, soft termination ST15B104K160 ST, AEC-Q200 Match, adds flexure margin; thickness tolerance wider
Soft termination SH15B104K160 SH, Ag-poly Match, adds flexure margin
More voltage margin 0402B104K500 General purpose Mismatch in voltage (50 V); better DC-bias margin; on our shelf
X5R dielectric 0402X104K160 General purpose Mismatch in dielectric (X5R, 85 C limit); on our shelf
Smaller body 0201X104K160 General purpose Mismatch in size (0201) and dielectric (X5R); on our shelf

Write your current part in the last column. Thickness is 0.50 mm plus or minus 0.05 mm for the general-purpose and MT parts and plus or minus 0.20 mm for the SH and ST parts, per Walsin’s datasheets WTC_MLCC_General_Purpose.pdf and WTC_MLCC_Automotive_MT.pdf linked in our export. Our post on how to cross-reference an MLCC lists the fields to check first.

Does a decoupling capacitor need X7R, X5R or AEC-Q200?

It depends on temperature and on the end market. X7R holds its rating to 125 C and X5R to 85 C, which is why 268 of the 336 Walsin 100 nF parts are X7R; AEC-Q200 is for boards that go into vehicles, and 58 of the 336 carry it.

An MCU on an industrial or automotive board can sit in a hot enclosure, so X7R is the safe default. X5R is fine on a phone or consumer board and reaches 100 nF in a smaller case. Placement matters as much as dielectric: the loop between the capacitor pads and the chip’s supply and ground pins sets the inductance, and a smaller case placed closer often decouples better than a larger value further away. Class II MLCC also lose capacitance under DC bias, so a 16 V part on a 5 V rail keeps more of its value than a 6.3 V part. Our posts on decoupling at the package and MLCC DC bias and voltage derating go further.

Which Walsin 100 nF MLCC are on the Hong Kong shelf?

Twenty-six lines. We checked all 336 parts against our ready stock snapshot dated 9 November 2026: 26 are on our shelf in Hong Kong (snapshot 9 Nov 2026), 7 in 0603, 6 in 0402, 4 in 1206, 3 each in 0201 and 0805, 2 in 1812 and 1 in 2220.

The 0402 lines are 0402B104K160, 0402B104K250, 0402B104K500, 0402B104J100, 0402X104K160 and 0402X104K250; the 0603 lines include 0603B104K160 and the soft-termination SH18B104K500; and the high-voltage end runs to 1812B104K631 at 630 V and 2220B104K102 at 1 kV. Lines not on the snapshot are to order: request a quote and we source them through our authorised Walsin channel. The ready stock list is a dated snapshot held in Hong Kong, and the MLCC range page shows every series. We confirm availability, date code and lead time on each quote.

How Venatech helps: how does an Indian design team source decoupling capacitors?

How Venatech helps: cross every decoupling line in one upload. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and 26 of the 336 parts in this post are on our Hong Kong shelf snapshot.

Paste an incumbent 100 nF part into the free cross-reference tool, or upload the BOM at /bom/ and request a quote through the site. We serve India from Hong Kong in small lots, which suits prototype and pilot builds, and we quote fast. Qualification stays with you.

The short version

  • Tata Electronics’ Dholera fab is an 11 billion US dollar, 50,000-wafer-a-month project aimed at PMICs, display drivers and MCUs (Tom’s Hardware, 17 May 2026); commercial operations are now expected in mid-2028 (TrendForce, 20 July 2026).
  • Walsin lists 336 MLCC at 100 nF: 268 X7R, 58 AEC-Q200, from 01005-class to 2225.
  • A 100 nF, 16 V, 0402 X7R brief has four direct Walsin answers.
  • 26 Walsin 100 nF lines are on our Hong Kong shelf snapshot dated 9 November 2026.

Send us the decoupling lines from your MCU or PMIC board and we will return the Walsin crosses with every difference stated. What rail voltage do your 100 nF parts sit on?

Related reading

Last reviewed: 16 November 2026.

Sources

Fetched 16 November 2026.

  • Tom’s Hardware, ASML to equip India’s first commercial chip fab, 17 May 2026: https://tomshardware.com/tech-industry/asml-partners-with-tata-electronics-to-equip-indias-first-commercial-semiconductor-fab
  • TrendForce, Tata’s India fab reportedly to launch at 90nm instead of 28nm, commercial production delayed to mid-2028, 20 July 2026: https://www.trendforce.com/news/2026/07/20/news-tatas-india-fab-reportedly-to-launch-at-90nm-instead-of-28nm-commercial-production-delayed-to-mid-2028/
  • Venatech MLCC upload files Venatech_MLCC_Upload_01.xlsx to _08.xlsx and ready stock snapshot dated 9 November 2026, re-measured 16 November 2026.

Frequently asked questions

How many 100nF decoupling capacitors does Walsin make?

336 MLCC at exactly 100 nF in our count of 16 November 2026: 268 X7R, 30 X5R, 24 C0G and 14 in X6S, X7S or X8R, from 4 V to 1.5 kV.

Which Walsin part crosses a 100 nF 16 V 0402 X7R capacitor?

0402B104K160 in the general-purpose series, MT15B104K160 with AEC-Q200, or SH15B104K160 and ST15B104K160 with soft termination. Confirm thickness and the bias curve against both datasheets.

Is there an AEC-Q200 100nF MLCC from Walsin?

Yes. We counted 58 AEC-Q200 parts at 100 nF in the MT and ST series, from 0402 to 1825, 13 of them in 0402.

What is the smallest Walsin 100 nF MLCC?

Five parts in the ultra-small 01R5 series, then 21 in 0201, all X5R, X6S or X7S. The 0201 parts reach 25 V.

Does Venatech stock 100 nF MLCC in Hong Kong?

26 Walsin 100 nF lines are on our ready stock snapshot dated 9 November 2026, including 0402B104K160 and 0603B104K160. Stock moves; other lines are sourced on request.

Can Venatech supply electronics makers in Gujarat and across India?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to India. Use the free cross-reference tool or upload a BOM; confirm import rules with your compliance team.


Share This, Choose Your Platform!