NEWS

0603 Chip Resistor Supply for ECMS Board Makers in India: 12 More Approvals Take the Scheme to 118 Projects, and Walsin Lists 7,876 Parts at 1 Percent

For a 0603 chip resistor on a board built under India’s ECMS push, Walsin Technology (Walsin) lists 7,876 thick-film parts at 1 percent, 3,082 of them anti-sulfur, and 83 such lines sit on our shelf in Hong Kong (snapshot 9 Nov 2026). Venatech, Walsin’s authorised distributor in Hong Kong, crosses and quotes them.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for an NPI or sourcing engineer in India whose plant, or whose customer’s plant, is moving component and board work onshore. We parsed Walsin’s thick-film general-purpose 1 percent exports, Thick_Film_General_Purpose_1_1_10W.xlsx and Thick_Film_General_Purpose_1_1_8W.xlsx, and our Hong Kong stock snapshot dated 9 November 2026. Every part number is real; the news facts name their source and date.

What did India approve under ECMS in November 2026?

Twelve more projects. IBEF reported on 9 November 2026 that India’s Ministry of Electronics and IT cleared a new tranche of 12 applications under the Electronics Components Manufacturing Scheme (ECMS), worth over 7,500 crore rupees, about 792 million US dollars, covering materials and capital goods as well as components.

A Drishti IAS summary dated 11 November 2026 adds that the round targets multilayer PCBs, relays, heat sinks and specialty ceramics among components, copper foil and polypropylene film among supply-chain products, and that ECMS approvals now total 118 projects across 16 states, nearly half of them MSMEs. Neither source lists capacitor or resistor plants in this tranche, and we add no forecast. The point for a board engineer is that more of the bare board, the relay and the film material is being made in India, so more final assembly follows it, and every assembled board carries chip resistors.

What does a new multilayer PCB or relay plant in India mean for the BOM?

More local assembly, and a BOM that must be sourced twice. A board made onshore still needs hundreds of chip resistors, and 0603 remains the default size for logic pull-ups, relay-drive bias and LED current setting; Walsin’s 1 percent exports alone hold 7,876 distinct 0603 thick-film part numbers.

When an EMS line in Noida or Chennai picks up a relay board or an industrial controller, the buyer usually inherits a BOM written around one resistor brand. The practical engineering question is whether every resistor line has a second source that matches value, tolerance, TCR, power and, for relay and power boards in polluted or humid sites, sulfur resistance. Our guide to cross-referencing chip resistors to Walsin shows the method, and MLCC and chip resistor supply for India covers the wider picture. The chip resistor range lists every Walsin family.

How many 0603 chip resistor parts does Walsin list at 1 percent?

7,876, in six series. We counted 7,876 distinct 0603 part numbers at 1 percent tolerance in Walsin’s thick-film general-purpose exports, split across six series, with 7,077 rated 1/10 W and 799 rated 1/8 W; 3,082 of them belong to the two anti-sulfuration series.

0603, 1 percent, Walsin thick-film series Part numbers
General purpose (automotive) 2,397
General purpose anti-sulfuration (automotive) 1,598
High-grade anti-sulfuration (automotive) 1,484
General purpose 799
General purpose LF 100 ppm 799
General purpose LF 100 ppm (automotive) 799
Total 7,876

By temperature coefficient, 5,927 of the 7,876 carry 100 ppm per degree or better; the rest are low-ohm and high-ohm values with wider bands. We have not seen the 0603, 1 percent slice counted this way anywhere else. For a reader in India, it means a single 0603 value usually has several Walsin options, and the choice is about grade and sulfur resistance, not about whether a part exists.

Which Walsin 10 kilohm, 0603 parts fit an anti-sulfur relay-board brief?

Four of ten. We filtered the exports to 10 kilohm, 0603, 1 percent and found ten Walsin part numbers; four are anti-sulfuration types that fit a relay or power board in a sulfur-bearing atmosphere: WR06X1002FTLV, WR06X1002FTLZ, SR06X1002FTL and SR06X1002FTLW.

Put your incumbent, for example a Yageo RC0603 or a KOA RK73 line, in the last column.

Walsin part Series Rated power TCR Match / mismatch with 10 kilohm, 1%, 0603, anti-sulfur Your incumbent
SR06X1002FTL High-grade anti-sulfuration (automotive) 1/10 W 100 ppm Match
SR06X1002FTLW High-grade anti-sulfuration (automotive) 1/10 W 100 ppm Match
WR06X1002FTLV General purpose anti-sulfuration (automotive) 1/10 W 100 ppm Match
WR06X1002FTLZ General purpose anti-sulfuration (automotive) 1/10 W 100 ppm Match
WR06X1002FTL General purpose 1/10 W 100 ppm Mismatch: no anti-sulfur termination; fits a clean indoor board
WR06X1002FTR General purpose LF 100 ppm 1/10 W 100 ppm Mismatch: no anti-sulfur termination
MR06X1002FTL General purpose (automotive) 1/8 W 100 ppm Mismatch: no anti-sulfur termination; more power

Sulfur attacks the silver in a standard thick-film termination and can open a resistor after months in the field near rubber, diesel exhaust or some industrial processes. If your relay board ships into such a site, the anti-sulfur rows are the place to start. Confirm against both datasheets and qualify in your own circuit; our note on Walsin automotive chip resistors: MR, SR and the AEC-Q200 split explains the prefixes.

Which 0603 chip resistors are on the Hong Kong shelf?

Eighty-three lines. Our stock snapshot dated 9 November 2026 holds 83 Walsin 0603, 1 percent general-purpose lines on our shelf in Hong Kong, including WR06X1002FTL at 10 kilohm, WR06X1001FTL at 1 kilohm, WR06X4701FTL at 4.7 kilohm and WR06X1003FTL at 100 kilohm.

They cover the common E24 and E96 values an NPI build needs for first articles and line-down cover. The anti-sulfur rows in the table are to order: request a quote and we source them through our authorised Walsin channel. The ready-stock list is a dated snapshot, not a live feed, and we make no stock, price or lead-time promise.

How Venatech helps: what should an Indian NPI team send us?

The resistor lines from the BOM. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, listing every field where the Walsin part differs from your original.

Paste a resistor code into the cross-reference tool, or upload the whole BOM and request a quote through the site; we return the Walsin cross, the anti-sulfur option where it exists, and the shelf lines from the ready-stock snapshot, dated 9 November 2026. We work from Hong Kong, in small lots, with fast quotes that state availability, date code and lead time per line. Walsin is the line we are authorised for; Stackpole and Viking are lines we supply. We give no advice on ECMS eligibility, customs or duty; confirm that with your own team.

The short version

India cleared 12 more ECMS projects worth over 7,500 crore rupees, IBEF reported on 9 November 2026, taking the scheme to 118 approvals across 16 states with multilayer PCBs and relays in the latest round. Boards built onshore still run on 0603 chip resistors. Walsin covers 0603 at 1 percent with 7,876 parts, 3,082 of them anti-sulfur, a 10 kilohm brief returns ten options, and 83 lines are on our shelf in Hong Kong.

Send us your resistor lines and we will return Walsin crosses with every difference stated. Which of your boards ships into a site with sulfur in the air?

Related reading

Last reviewed: 16 November 2026.

Sources

Fetched 16 November 2026.

  • IBEF, “Government clears 12 electronics component manufacturing proposals worth over US 791.89 million under ECMS”, 9 November 2026: https://www.ibef.org/news/government-clears-12-electronics-component-manufacturing-proposals-worth-over-us-791-89-million-under-ecms
  • Drishti IAS, “Semicon 2.0 Web Application Portal and ECMS Approvals”, 11 November 2026: https://www.drishtiias.com/daily-updates/daily-news-analysis/semicon-2-0-web-application-portal-ecms-approvals/print_manually
  • Walsin thick-film exports, Thick_Film_General_Purpose_1_1_10W.xlsx and Thick_Film_General_Purpose_1_1_8W.xlsx, re-measured 16 November 2026; Venatech Hong Kong stock snapshot dated 9 November 2026.

Frequently asked questions

What is ECMS in India?

The Electronics Components Manufacturing Scheme supports component, material and capital-goods plants in India. IBEF reported on 9 November 2026 that 12 more proposals worth over 7,500 crore rupees were cleared, and approvals now total 118 projects across 16 states.

How many 0603 chip resistors does Walsin offer at 1 percent?

We counted 7,876 distinct 0603 thick-film part numbers at 1 percent in Walsin’s general-purpose exports, in six series. 3,082 are anti-sulfuration types.

Which Walsin part crosses a 10k 0603 1% resistor?

WR06X1002FTL is the general-purpose 10 kilohm, 0603, 1 percent part, and it is on our shelf in Hong Kong. For a sulfur-bearing site, SR06X1002FTL, SR06X1002FTLW, WR06X1002FTLV and WR06X1002FTLZ are the anti-sulfur options.

Can Walsin replace a Yageo RC0603 resistor on a board built in India?

Usually, field by field. Match value, tolerance, TCR, power and termination type, then qualify the Walsin part in your own circuit. VenaMatch states every difference from your original.

Does Venatech advise on ECMS eligibility?

No. We cross and quote parts. Confirm scheme, customs and duty questions with your own team.

Is Venatech an authorised Walsin distributor?

Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong and serves engineers in India in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!