NEWS

Soft Termination MLCC for Marine Electronics in Greece: 1,653 Walsin Flex-Crack-Resistant Parts

A soft termination MLCC adds a flexible conductive polymer layer under its plated ends, so board bending and vibration are less likely to crack the ceramic. Walsin lists 1,653 soft termination MLCC in its SH, SG and ST series, and 29 are on our shelf in Hong Kong. Venatech is the authorised Walsin distributor in Hong Kong, serving Greece.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for hardware and reliability engineers, and their buyers, at marine electronics integrators, ship repair and retrofit suppliers in Piraeus and across Greece. Walsin Technology (Walsin) is the line we are authorised for. On 16 November 2026 we parsed all 23,360 part numbers in our MLCC upload files, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, selected the three soft termination series, and checked them against our ready stock snapshot dated 9 November 2026. Every part number below is real.

How many ships are on order for Greek owners?

1,003. Greek City Times reported on 5 October 2026, citing Xclusiv Shipbrokers, that 1,003 vessels are on order for Greek interests, about 16.7 percent of the global orderbook, with 408 new orders placed in 2026, about 21 percent of this year’s global activity.

By segment the report counts 463 tankers, 233 containerships, 209 bulk carriers and 98 gas carriers. Those are the brokers’ figures as reported, not ours, and the ships are built at yards abroad. The demand that stays in Greece is the electronics around them: bridge and engine-room systems specified by Greek technical managers, retrofit work, and the repair and spares work in Piraeus. Every one of those boards lives with vibration, thermal cycling and salt-laden humidity, which is where capacitor cracking starts.

Why do MLCC crack in marine electronics, and what does soft termination change?

Because ceramic does not bend. An MLCC soldered rigidly to a board takes the board’s flexure straight into its body, and a crack from the termination edge can turn into a leakage path or a short; soft termination puts a conductive polymer layer between the electrode and the plating, which absorbs part of that strain.

Marine boards see flexure from more than one source: depanelling and press-fit connectors at assembly, screw-down into enclosures, engine and propeller vibration in service, and repeated thermal cycles between a hot machinery space and air-conditioned control rooms. Large cases are the most exposed, because the strain across the body grows with its length, which is why 1206 and larger capacitors are the first to move to soft termination. A cracked MLCC can also pass a factory test and fail later, once humidity gets into the crack, so the fix is cheaper at design time than at sea. Our guide to soft termination MLCC: SH, SG, ST and VT covers the construction.

How many soft termination MLCC does Walsin list, and in which sizes?

1,653, in ten case sizes. We counted 1,653 distinct Walsin soft termination part numbers: 1,472 in the SH series with an Ag-polymer layer, 65 in the SG series with a Cu-polymer layer and 116 in the ST series qualified to AEC-Q200; 506 of them are 1206.

Case size SH (Ag-poly) SG (Cu-poly) ST (AEC-Q200) All soft termination
0402 81 0 1 82
0603 239 26 34 299
0805 319 15 24 358
1206 457 22 27 506
1210 150 0 22 172
1812 128 2 1 131
1808, 1825, 2220 and 2225 98 0 7 105

The range runs from 6.3 V to 3,000 V, with 1,180 X7R and 444 C0G parts. Of the 1,653, 29 are on our shelf in Hong Kong (snapshot 9 Nov 2026), 10 of them in 0805 and 10 in 1206. We have not seen this soft termination split counted anywhere else.

Which Walsin soft termination parts cross a 100 nF, 50 V X7R MLCC?

Eleven, from 0603 to 1206. At 100 nF, 50 V and X7R we found 11 Walsin soft termination part numbers, in the SH, SG and ST series; SH18B104K500 in 0603 is on our shelf in Hong Kong (snapshot 9 Nov 2026).

Incumbent: 100 nF, 50 V, X7R, 10 percent Walsin part Size Series Thickness in export Export file Match / mismatch
Standard part, for reference 0603B104K500 0603 General Purpose 0.80 +0.15/-0.10 mm Venatech_MLCC_Upload_04.xlsx Baseline; no soft termination
Same size, soft termination SH18B104K500 0603 SH, Ag-poly 0.80 mm, tolerance 0.30 Venatech_MLCC_Upload_08.xlsx Match, on our shelf; wider thickness tolerance
Same size, Cu-poly SG18B104K500 0603 SG, Cu-poly 0.80 mm, tolerance 0.30 Venatech_MLCC_Upload_08.xlsx Match
Same size, AEC-Q200 ST18B104K500 0603 ST, AEC-Q200 0.80 mm, tolerance 0.30 Venatech_MLCC_Upload_01.xlsx Match, adds AEC-Q200
Standard 0805 0805B104K500 0805 General Purpose 0.80 mm Venatech_MLCC_Upload_02.xlsx Baseline
0805 soft termination SH21B104K500 0805 SH, Ag-poly 1.25 mm Venatech_MLCC_Upload_08.xlsx Mismatch in thickness: 0.45 mm taller
1206 soft termination SH31B104K500 1206 SH, Ag-poly 1.25 mm Venatech_MLCC_Upload_08.xlsx Match if moving up a size

The thickness column is the one to check before a change: in Walsin’s export the soft termination 0805 parts at 100 nF are 1.25 mm, against 0.80 mm for the standard part, which matters under conformal-coat masks or a low enclosure. Our post on how to cross-reference an MLCC lists the other fields to compare. The MLCC range page shows every series.

Which soft termination family suits a marine board: SH, SG or ST?

SH for breadth, ST where an AEC-Q200 record helps, SG where Cu-polymer is specified. The SH series carries 1,472 of the 1,653 Walsin soft termination parts and the full voltage range; the ST series adds AEC-Q200 qualification across 116 parts; the SG series offers 65 parts with a copper-polymer layer in 0603 to 1812.

Marine electronics has no single capacitor standard, but integrators often prefer parts with an automotive qualification record because it documents temperature cycling and humidity testing they would otherwise repeat. That is the case for ST on engine-room controllers. SH is the default where the value or voltage you need is only there, for example high-voltage snubbers on shore-power converters. Whichever you choose, keep the rest of the design honest: place large MLCC away from board edges, screw bosses and connectors, and orient them parallel to the likely bend line. Request a quote for any line not on the snapshot and we source it through our authorised Walsin channel. See also MLCC DC bias and voltage derating.

How Venatech helps: what can a Greek marine electronics team send us?

Your capacitor list, and we return the soft termination crosses with thickness stated. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch at /cross-reference/ decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and 29 of the 1,653 soft termination parts counted here are on our shelf in Hong Kong (snapshot 9 Nov 2026).

Paste a capacitor into the cross-reference tool, filtering for soft termination, or upload the BOM at /bom/. Check the dated ready stock list and request a quote through the site. We serve Greece from Hong Kong in small lots, which suits retrofit kits, repair spares and pilot builds, and we confirm availability and date code on each quote. Qualification and type approval stay with your team.

The short version

  • Greek City Times reported on 5 October 2026, citing Xclusiv Shipbrokers, that 1,003 vessels are on order for Greek interests, about 16.7 percent of the global orderbook.
  • A soft termination MLCC absorbs part of the board strain that cracks rigid ceramic capacitors under vibration and flexure.
  • Walsin lists 1,653 soft termination MLCC: 1,472 SH, 65 SG and 116 ST, from 0402 to 2225.
  • At 100 nF, 50 V, X7R there are 11, and SH18B104K500 is on our shelf in Hong Kong (snapshot 9 Nov 2026).

Send us the large-case capacitor lines from your marine board and we will return the soft termination crosses with every difference stated. Where on the board have you seen cracked capacitors before?

Related reading

Last reviewed: 16 November 2026

Sources

Fetched 16 November 2026.

  • Greek City Times, Greek shipping enters new era as ship orders surpass 1,000, 5 October 2026: https://greekcitytimes.com/2026/10/05/greek-shipping-enters-new-era-as-ship-orders-surpass-1000/
  • Venatech MLCC upload files Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx and ready stock snapshot dated 9 November 2026, re-measured 16 November 2026.

Frequently asked questions

What is a soft termination MLCC?

An MLCC with a flexible conductive polymer layer between its electrode and its plated ends, which absorbs part of the board strain that would otherwise crack the ceramic. Walsin lists 1,653 of them.

Do I need soft termination capacitors for marine electronics?

Often, for 1206 and larger parts and anywhere near board edges, connectors or screw points, because vibration and flexure are constant at sea. Confirm against your reliability and type-approval requirements.

Which Walsin soft termination MLCC crosses a 100 nF, 50 V X7R 0603 part?

SH18B104K500, SG18B104K500 or the AEC-Q200 ST18B104K500, all 10 percent. Check thickness: the soft termination 0603 parts carry a 0.30 mm tolerance.

Is a soft termination MLCC taller than a standard one?

Sometimes. At 100 nF, 50 V in 0805, Walsin’s soft termination parts are 1.25 mm against 0.80 mm for the general purpose part.

Does Venatech stock soft termination MLCC in Hong Kong?

29 Walsin soft termination parts are on our shelf in Hong Kong (snapshot 9 Nov 2026), including SH18B104K500. Stock moves; other lines are sourced on request.

Can Venatech supply marine electronics makers in Greece?

Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to Greece. Use the cross-reference tool or upload a BOM; confirm import rules with your compliance team.


Share This, Choose Your Platform!