Jordan ICT and startup hardware from Hong Kong start with an honest MLCC cross. We resolved a Yageo CC1206KKX7R9BB475, a 4.7 microfarad, 10%, 50 V X7R 1206 capacitor, and found 3 Walsin Technology (Walsin) rows that match on value, dielectric, tolerance and voltage. 1, SH31B475K500, is on our shelf, and it is a soft-termination part.
Venatech Limited, an authorised Walsin distributor in Hong Kong, holds the Walsin MLCC export of 23,601 distinct part numbers, 28 Walsin datasheets (451 pages) and a stock list dated 23 September 2026. This post is for a design or procurement engineer at a Jordanian hardware startup or ICT equipment maker who has a Yageo 4.7 microfarad 1206 capacitor on a bill of materials and wants Walsin candidates in small lots from Hong Kong. Every Walsin part number is real, every count is ours, and the news statement names its source and the day we fetched it, 2 November 2026.
What did the February 2026 report say about Jordan’s ICT sector?
Petra, Jordan’s news agency, reported on 22 February 2026 that the ICT sector recorded significant growth in 2025, that Saudi Arabia was the top export destination for Jordanian tech companies, followed by Syria and Iraq, and that the Jordan Startups platform listed more than 500 startups.
The article, which we fetched on 2 November 2026, gives no revenue, growth percentage or headcount, and names no electronic component, so we draw no link between its statements and any capacitor. Our view, labelled as ours: a country with 500 startups includes hardware teams building prototypes and short runs, and those teams buy in dozens, not reels. That is the order size we are set up for. We have no relationship with any Jordanian startup or with Petra.
What does a Yageo CC1206KKX7R9BB475 say, field by field?
Yageo’s own specification page for CC1206KKX7R9BB475, resolved on 2 November 2026, shows a 4.7 microfarad, plus or minus 10% capacitor in X7R, rated 50 VDC, in 1206 (3216 metric), with a thickness of 1.6 mm, plus or minus 0.2 mm.
| Field | Yageo CC1206KKX7R9BB475 (page value) | Walsin 1206B475K500 (export) | Match / mismatch |
|---|---|---|---|
| Case | 1206 (3216 metric) | 1206 |
Match |
| Capacitance | 4.7 microfarad | 4700nF |
Match, the export writes it in nanofarad |
| Tolerance | plus or minus 10% | +-10% |
Match |
| Dielectric | X7R | X7R |
Match |
| Voltage | 50 VDC | 50Vdc |
Match |
| Thickness | 1.6 mm, plus or minus 0.2 mm | 1.60+0.30/-0.10 |
Mismatch: the band is plus 0.3 and minus 0.1, not symmetric |
| Termination | not stated on the page we read | no value in the export | Open: confirm on the datasheet |
The string CC1206KKX7R9BB475 is not in the Walsin export and is not a Walsin number. The Walsin sheet for the general purpose series is WTC_MLCC_General_Purpose.pdf, which we hold.
Which Walsin rows answer a 4.7 microfarad, X7R, 10%, 50 V, 1206 line?
We parsed the 3,348 Walsin 1206 MLCC rows and found 40 at 4.7 microfarad, 22 of them X7R, 10 of those at plus or minus 10%, and only 3 of those 10 rated 50 V: 1206B475K500, SH31B475K500 and ST31B475K500. We have not seen this counted anywhere.
| Walsin part | Series as exported | Thickness, voltage | On shelf 23 Sep 2026 | Match / mismatch against the Yageo line |
|---|---|---|---|---|
1206B475K500 |
General purpose | 1.60+0.30/-0.10 mm, 50 V | No | Match on the five electrical fields; mismatch: thickness band |
SH31B475K500 |
Soft termination SH (Ag-poly) | 1.60±0.50 mm, 50 V | Yes | Match on the electrical fields; mismatch: thickness band plus or minus 0.5; a soft-terminated part |
ST31B475K500 |
Automotive soft termination ST | 1.60±0.50 mm, 50 V | No | Match on the electrical fields; mismatch: thickness band; an AEC-Q200 compliant family |
1206B475K250 |
General purpose | 1.60+0.30/-0.10 mm, 25 V | No | Mismatch: voltage 25 V against 50 V |
1206B475K100 |
General purpose | 1.60+0.30/-0.10 mm, 10 V | Yes | Mismatch: voltage 10 V against 50 V |
No Walsin row matches the Yageo thickness band of plus or minus 0.2 mm exactly, so the board’s height or stack-up check is the field to confirm. Our post on how to cross-reference an MLCC gives the method, and our MLCC range lists the series.
What does a soft-termination part change for the buyer?
It changes the termination, which is built to tolerate board flex, and it changes the thickness band to plus or minus 0.5 mm; the SH family in the export holds 1,488 distinct part numbers and ST holds 118, and SH31B475K500 is the only 50 V candidate for this line that is on our shelf.
We will not tell you a soft-termination part is a better or a worse choice. We will show you where it differs: the electrical fields are the same, the termination is different and not stated in the export, and the height band is wider than the Yageo page allows. If your board flexes in a handheld or an enclosure, the difference may help; if your stack-up has no height margin, it may not. Walsin’s application guide covers mounting and reflow, and our post on MLCC DC bias and voltage derating covers the voltage side.
What does the Hong Kong shelf hold for this line?
As at 23 September 2026 our list holds 1,125 distinct part numbers, 102 of them in the 1206 MLCC export, and 1 of the 3 candidates for this line, SH31B475K500, is among them; the other 2 are factory orders.
The ready stock list is a dated snapshot, never live-synced, and we quote part-number counts, never piece counts. Our post on Walsin passive components in Hong Kong stock explains how to read it. A 10 V general purpose part, 1206B475K100, is also on the list, but it differs on voltage.
What will we not tell you about Jordan’s technology sector?
We searched the text of all 28 Walsin datasheets we hold, 451 pages, for Jordan, Amman, startup and Middle East, and found 0 matches. We therefore say nothing about Jordanian standards, import rules or the tech sector, and we give no legal, customs or conformity advice; confirm with your compliance team.
We hold no office, entity or stock in Jordan; our locations are Hong Kong, Shenzhen, Singapore and Jiangmen, with Chengdu in preparation. The export carries no termination, lifecycle or measured bias-curve field for these parts, and qualification stays with you.
Why do buyers in Jordan choose Venatech?
Because the cross is honest, small-lot friendly and made in Hong Kong. Venatech Limited is an authorised Walsin distributor, and Walsin is the one line we call authorised; Stackpole and Viking are lines we supply.
- A tool that shows the mismatches. Paste the Yageo number into VenaMatch, which decodes 18 manufacturers’ part numbers across 800,000+ crossable parts. Here you see 3 candidates and 2 near-misses, each with its differences stated, including the thickness band no row matches.
- Range you can count. Walsin’s MLCC export lists 23,601 distinct part numbers, 3,348 of them in 1206, and 40 of those at 4.7 microfarad. A Jordanian buyer sees the whole ladder of voltage, dielectric and series at one capacitance.
- A Hong Kong shelf and small lots. A dated ready-stock list, snapshot 23 September 2026, not live, and small lots welcome, which is the right size for a startup prototype run.
- Honest about gaps. We tell you that no Walsin row matches the thickness band, and that the shelf part is soft-terminated. That honesty is part of the service.
How can Venatech help a Jordanian buyer cross a Yageo part?
By showing the differences instead of hiding them, in small lots. Venatech Limited is an authorised Walsin distributor in Hong Kong.
- Cross-reference. Paste your Yageo number into the free cross-reference tool, which decodes 18 manufacturers’ part numbers across 800,000+ crossable parts, and read the Walsin candidates with each field marked match or mismatch.
- BOM check. Upload the prototype’s bill of materials to /bom/, up to 500 part numbers or an Excel or CSV file.
- Ready stock. The ready-stock list is a Hong Kong snapshot dated 23 September 2026, not live.
- Service. Hong Kong-based, small lots, help with cross-referencing by hand when the tool returns no clean candidate, and a quote requested through the site.
Worked example from our own export: a Yageo 4.7 microfarad, 10%, X7R, 50 V, 1206 line maps to 1206B475K500 on five fields with a different thickness band, and to the shelf part SH31B475K500 if you accept soft termination and a wider thickness band. Confirm against both datasheets and qualify in your own circuit.
The short version
For a Jordanian buyer, a Yageo CC1206KKX7R9BB475 line finds 3 Walsin 1206 rows at 4.7 microfarad, X7R, 10% and 50 V, none matching the thickness band exactly, and the 1 on the Hong Kong shelf is a soft-termination part.
Send us one capacitor from a Jordanian prototype bill of materials and we will return the Walsin candidates with every difference stated and the stock position named. If your stack-up has 0.2 mm of height margin, does a plus or minus 0.5 mm band end the conversation?
Sources
Fetched on 2 November 2026 with WebFetch; the pages below are the only sources for news and product statements in this post.
- Petra (Jordan News Agency), “Jordan’s ICT sector records growth in 2025 driven by economic modernisation vision”, 22 February 2026: https://www.petra.gov.jo/en/news/jordans-ict-sector-records-growth-in-2025-driven-by-economic-modernisation-vision-intj
- Yageo specification page for CC1206KKX7R9BB475, resolved on 2 November 2026: https://www.yageogroup.com/download/specsheet/CC1206KKX7R9BB475
Frequently asked questions
What did Petra report on Jordan’s ICT sector in February 2026?
On 22 February 2026 it reported significant growth in 2025, Saudi Arabia as the top export destination, and more than 500 startups on the Jordan Startups platform. It gives no figures and names no component. Confirm anything you reuse with the ministry.
What is a Yageo CC1206KKX7R9BB475?
Yageo’s specification page, resolved on 2 November 2026, shows a 4.7 microfarad, plus or minus 10 percent, X7R, 50 VDC capacitor in 1206 with 1.6 mm thickness. It is not a Walsin number. Confirm against Yageo’s own datasheet.
How many Walsin rows match 4.7 microfarad, X7R, 10 percent, 50 V and 1206?
We counted 3 in the 23,601-part MLCC export: one general purpose, one soft termination SH and one automotive soft termination ST. None matches the plus or minus 0.2 mm thickness band exactly.
Is any candidate on the Hong Kong shelf?
Yes, one. As at 23 September 2026 SH31B475K500 is on our stock list, and it is soft-terminated. The other 2 candidates are not and would be quoted through the site. The list is a dated snapshot, never live-synced.
Is a soft-termination capacitor a drop-in replacement?
We do not call any part a drop-in. The electrical fields match, but the termination differs and the thickness band is wider than the Yageo page allows. Check both datasheets and qualify in your own board.
Can Venatech advise on Jordanian import rules?
No. None of the 28 Walsin datasheets we hold, 451 pages, mentions Jordan, and we give no legal, customs or conformity advice. We hold no office, entity or stock in Jordan. Qualification stays with you.