An anti-sulfur resistor uses a termination that sulfur gas cannot turn into silver sulfide, the slow open-circuit failure of ordinary thick-film chips in heavy industry. Walsin lists 41,147 anti-sulfur chip resistors, 17,617 of them outside its automotive series. Venatech is the authorised Walsin distributor in Hong Kong, serving Kosice, Slovakia.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for engineers and buyers who design, build or repair control electronics for the steel and metals industry in Kosice and across eastern Slovakia. Walsin Technology (Walsin) is the line we are authorised for. On 16 November 2026 we read all of our chip resistor upload files, Venatech_ChipR_Upload_01.xlsx onwards (234,378 distinct part numbers), filtered them to the anti-sulfuration tag and split the result by series. Every count below is ours, and every part number is in Walsin’s export.
What is Nippon Steel building at the Kosice steelworks?
An electric arc furnace of about 1.6 million tonnes a year. Nippon Steel announced on 16 September 2026 an investment of about 0.9 billion euros in a new electric arc furnace and a new air separation unit at the Kosice steelworks, with the furnace due to start production in 2030 and the air separation unit in 2029.
The release says a grant agreement signed with the Slovak government on 15 September 2026 provides up to 350 million euros from the EU Modernisation Fund, 310 million for the furnace and 40 million for the air separation unit, and that the furnace will run alongside the existing blast furnaces. U. S. Steel Kosice becomes a direct Nippon Steel subsidiary from 1 October 2026, renamed Nippon Steel Slovakia. Those are the company’s figures. An arc furnace brings large power conversion, drives, metering and protection systems, and every one of them carries control boards that have to survive the plant’s air for years.
Why does steelworks electronics need an anti-sulfur resistor?
Because sulfur slowly eats the silver in a standard chip resistor’s inner termination. In a thick-film chip resistor, sulfur compounds in the air react with exposed silver at the edge of the termination to form silver sulfide, which does not conduct; the resistance creeps up over months and the part ends open circuit, often with no visible damage.
Steel plants, coke ovens, rubber and tyre works, paper mills and sites burning high-sulfur fuel all carry elevated sulfur in the air, and so do boards sealed in cabinets with sulfur-bearing gaskets or rubber. Conformal coating slows the attack but does not stop it where coverage is thin, which is usually at the resistor edge. An anti-sulfuration resistor changes the termination so that the silver is not exposed. Our posts on anti-sulfuration resistors: SF and SA arrays and anti-surge chip resistors cover the neighbouring families.
How many anti-sulfur chip resistors does Walsin list outside the automotive series?
17,617. We counted 41,147 Walsin chip resistors tagged anti-sulfuration: 23,530 sit in two automotive AEC-Q200 series and 17,617 sit outside them, in a high-power series, a high-precision series and four array series.
| Walsin anti-sulfur family, non-automotive | Parts | Sizes | Tolerance or power |
|---|---|---|---|
| Thick Film High Power Chip Resistor (Anti-Sulfuration) | 9,135 | 0402 to 2512 | 1/8 W to 2 W; 7,535 at 1 percent |
| High Precision Anti-Sulfuration Chip Resistor | 5,710 | 0402 to 1210 | 2,855 at 0.1 percent, 2,855 at 0.5 percent |
| Anti-sulfuration arrays, 0402 and 0603, two and four elements | 2,772 | 0402, 0603 | 1 percent or 5 percent |
| Total outside the automotive series | 17,617 |
The high-power series is the one for drive and power boards, since it reaches 2 W in 2512 with 1,661 parts in that size; the high-precision series suits measurement and metering front ends, and 5,700 of its 5,710 parts print a TCR of 100 ppm or better. The automotive pair, 10,659 general-purpose and 12,871 high-grade parts, is also open to an industrial design, and some buyers choose it for the AEC-Q200 paperwork. Walsin’s own datasheet for each family gives its full ratings; the chip resistor range page lists every series.
Which Walsin parts answer a 10 kilohm, 0603 anti-sulfur brief?
Eighteen, in six series. At 10 kilohm in 0603 with anti-sulfuration, we found 18 Walsin part numbers: 10 outside the automotive series, in high power, high precision and array form, and 8 in the two automotive series.
| Brief: 10 kilohm, 0603, anti-sulfur | Walsin part | Series | Tolerance, TCR, power | Match / mismatch | Your incumbent |
|---|---|---|---|---|---|
| Industrial, 1 percent | SF06P1002FTP |
High Power (Anti-Sulfuration) | 1%, 100 ppm, 1/8 W | Match | |
| Industrial, 1 percent, second code | WF06P1002FTLV |
High Power (Anti-Sulfuration) | 1%, 100 ppm, 1/8 W | Match; packaging suffix differs | |
| Precision | SF06H1002BTL |
High Precision Anti-Sulfuration | 0.1%, 100 ppm, 1/10 W | Match, tighter tolerance | |
| Precision, 0.5 percent | SF06H1002DTL |
High Precision Anti-Sulfuration | 0.5%, 100 ppm, 1/10 W | Match | |
| Automotive, 1 percent | SR06X1002FTL |
High Grade Anti-Sulfuration (Automotive) | 1%, 100 ppm, 1/10 W | Match, adds AEC-Q200 | |
| Array, four elements | SA06X1002FTL |
Anti-sulfuration array 0603 x4 | 1%, 200 ppm, 1/10 W | Mismatch: four-resistor array footprint | |
| 5 percent | SF06P103 JTP |
High Power (Anti-Sulfuration) | 5%, 100 ppm, 1/8 W | Mismatch in tolerance |
Leave the last column for your current part. If the incumbent is a standard 1 percent 0603 thick-film resistor, the high-power rows add power rating as well as sulfur resistance, which helps on a drive board; the precision rows suit a sensing divider. Check termination finish, power derating and packaging against both datasheets. Our guide to resistor arrays versus discrete resistors covers when an array is worth the footprint change.
Is any Walsin anti-sulfur resistor on the Hong Kong shelf?
One line. We checked all 41,147 anti-sulfur part numbers against our snapshot of 9 November 2026: one is on it, the 1206 zero-ohm jumper SR12X000 PTL in the automotive high-grade anti-sulfuration series, on our shelf in Hong Kong (snapshot 9 Nov 2026).
Every other anti-sulfur line is to order: request a quote and we source it through our authorised Walsin channel, confirming date code and lead time on each quote. For a repair or retrofit programme, send us the failed part numbers with their size and value and we will return the anti-sulfur alternatives side by side. The ready stock list is a dated snapshot held in Hong Kong. We give no stock or lead-time promise.
How Venatech helps: what can we cross for a Kosice controls team?
Every thick-film resistor on the board, in one pass. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch at /cross-reference/ decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and we supply Slovakia from Hong Kong in small lots.
Paste the resistor lines into the cross-reference tool, or upload the full BOM at /bom/, and ask for anti-sulfur alternatives in the request for quote. Every difference from your original is stated, field by field: tolerance, TCR, power and footprint. We hold 28 Walsin datasheets, 451 pages, and send the one for your series on request. Qualification in your enclosure and your atmosphere stays with you.
The short version
- Nippon Steel will invest about 0.9 billion euros in an electric arc furnace of about 1.6 million tonnes a year at Kosice, starting in 2030 (Nippon Steel, 16 September 2026).
- Walsin lists 41,147 anti-sulfur chip resistors: 23,530 automotive and 17,617 outside the automotive series.
- The non-automotive set runs from 0402 to 2512 and up to 2 W, with 5,710 high-precision parts.
- A 10 kilohm 0603 anti-sulfur brief returns 18 Walsin parts in six series.
- One anti-sulfur line is on our shelf in Hong Kong (snapshot 9 Nov 2026).
We will not tell you a part is a drop-in match. We will show you where it differs. How many resistors on your Kosice cabinet boards have already drifted open?
Related reading
- Anti-sulfuration resistors: SF and SA arrays
- Walsin automotive chip resistors: MR, SR and the AEC-Q200 split
- Resistor arrays versus discrete
- Free cross-reference tool, BOM upload and ready stock snapshot
Last reviewed: 16 November 2026.
Sources
Fetched 16 November 2026.
- Nippon Steel, decision to build a new electric arc furnace at U. S. Steel Kosice, 16 September 2026: https://www.nipponsteel.com/en/newsroom/news/2026/20260916_100.html
- Venatech chip resistor upload files Venatech_ChipR_Upload_01.xlsx onwards and ready stock snapshot dated 9 November 2026, re-measured 16 November 2026.
Frequently asked questions
What is an anti-sulfur resistor?
A chip resistor whose termination is built so that sulfur in the air cannot reach the silver and form silver sulfide, the cause of slow open-circuit failures in industrial atmospheres.
How many anti-sulfur chip resistors does Walsin make?
41,147 in our count of 16 November 2026: 23,530 in two automotive series and 17,617 in a high-power series, a high-precision series and four array series.
Which Walsin part crosses a 10 kilohm 0603 anti-sulfur resistor?
SF06P1002FTP or WF06P1002FTLV at 1 percent and 1/8 W, SF06H1002BTL at 0.1 percent, or SR06X1002FTL in the automotive series. Compare TCR, power and packaging against both datasheets.
Can an industrial design in Slovakia use Walsin’s automotive anti-sulfur resistors?
Yes, nothing prevents it, and the AEC-Q200 qualification can help a supplier questionnaire. Check that the series’ power and tolerance options fit the board.
Does Venatech stock anti-sulfur resistors in Hong Kong?
One line, SR12X000 PTL, a 1206 jumper, is on our snapshot of 9 November 2026. Other anti-sulfur parts are sourced on request through our authorised Walsin channel.
Can Venatech supply steelworks and industrial electronics makers in Kosice, Slovakia?
Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to Slovakia. Use the free cross-reference tool or upload a BOM; confirm import rules with your compliance team.