The 85/85 humidity test holds a powered part at 85 °C and 85 percent relative humidity, typically for 1,000 hours, and is the closest lab proxy for a damp engine room. Walsin lists 2,283 MLCC in its AEC-Q200 series and 41,147 anti-sulfur resistors. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for marine electronics engineers, equipment makers and retrofit workshops in Piraeus, Athens and the islands who build or repair the monitoring, navigation, ballast and engine-room electronics fitted to ships. Walsin Technology (Walsin) is the line we are authorised for. We parsed our MLCC and chip resistor upload files, Venatech_MLCC_Upload_01.xlsx to _08.xlsx and Venatech_ChipR_Upload_01.xlsx to _79.xlsx, on 19 November 2026 and counted distinct part numbers by series and tag, reading them against Walsin’s datasheets WTC_MLCC_Automotive_MT.pdf, ASC_SR.pdf and ASC_WR_V.pdf. Every part number below is real.
How many ships did Greek owners order in 2026?
408 by early October. Greek City Times reported on 4 October 2026, citing Xclusiv Shipbrokers, that Greek owners had placed 408 newbuilding orders in 2026, about 21 percent of global ordering activity, and held 1,003 vessels on order in all, about 16.7 percent of the world orderbook.
Tankers made up 463 of those 1,003 vessels, containerships 233, bulk carriers 209 and gas carriers 98, according to the same report. Each one is fitted with bridge, engine-room and cargo-handling electronics, and each will be repaired, retrofitted and upgraded through a service life of twenty years or more, much of it handled by Greek workshops. The question those workshops and their suppliers face is not how a part performs on day one, but how it performs after years of warm, wet, salty air.
What is the 85/85 humidity test?
A powered soak in hot, wet air. Murata’s FAQ on automotive and standard grade capacitors lists its automotive grade humidity load test at 85 °C, 85 percent relative humidity and rated voltage for 1,000 hours, against 40 °C, 90 to 95 percent humidity and rated voltage for 500 hours for its standard grade.
That contrast is the useful part. Both are humidity tests and both are called a pass, but the automotive condition puts twice the hours on the part at a temperature that drives moisture into the ceramic and terminations far faster. AEC-Q200, the automotive passive-component standard, includes a biased humidity test of this kind, which is why an automotive-qualified series is a reasonable proxy for marine duty when no marine-specific qualification exists. Our guide to what AEC-Q200 actually certifies sets out the full test list.
Check the datasheet. Humidity-load conditions differ by maker and by series. Compare the conditions printed in Walsin’s WTC_MLCC_Automotive_MT.pdf with those in WTC_MLCC_General_Purpose.pdf before you treat any series as qualified for your duty.
How do humidity and salt air make MLCCs and chip resistors fail?
Through moisture under bias and through sulfur. In an MLCC, moisture that reaches the electrodes under voltage lowers insulation resistance and can drive silver migration until the part leaks or shorts; in a thick film chip resistor, sulfur compounds attack the silver in the termination until the resistor drifts open.
A ship adds both. Engine rooms run warm and damp, condensation forms each time equipment cools, and salt mist settles on boards that are not fully sealed. Sulfur comes from fuel, exhaust, rubber seals and some cargoes. The capacitor failure is usually a leak that pulls a rail down; the resistor failure is a slow rise that ends in an open circuit, often in a sensor divider or pull-up, which shows up as an intermittent fault far from the part that caused it. Our guide to anti-sulfuration resistors explains why the resistor side needs its own construction.
Is a component that passed 85/85 ready for a ship?
It is a better start, not a finish line. A part from a series qualified to an 85 °C, 85 percent, 1,000 hour bias test has shown it survives sustained damp heat under voltage; it has not been tested against salt mist, condensation cycling or sulfur, which marine equipment standards and your own enclosure design have to cover.
So treat the component choice and the board protection as two separate layers. At the component layer, choose capacitors from an AEC-Q200 series and resistors that are both AEC-Q200 and anti-sulfur where the board is exposed. At the board layer, use conformal coating or potting, keep high-voltage nodes apart and give condensation a way to drain. Neither layer replaces the other. For boards that also flex, near cable entries or on vibrating mounts, the soft-termination series in our flex cracking guide adds a third layer.
How many Walsin capacitors and resistors carry the harsher qualification?
Tens of thousands. We counted 2,283 distinct MLCC in Walsin’s AEC-Q200 MT and ST series, and 41,147 distinct chip resistors tagged anti-sulfuration, 23,530 of which are also tagged AEC-Q200.
| Walsin range for damp, sulfur-bearing duty | Distinct parts |
|---|---|
| MLCC, AEC-Q200 MT series | 2,167 |
| MLCC, AEC-Q200 ST soft-termination series | 116 |
| Chip resistors tagged anti-sulfuration | 41,147 |
| of which also tagged AEC-Q200 | 23,530 |
We checked all 41,147 against the series names: they span several thick film anti-sulfuration series, including SR and the WR anti-sulfuration variants, plus anti-sulfur arrays. The capacitor range covers C0G and X7R from 0201 to 2220, which is enough to rebuild most of a marine controller’s passive list inside qualified series.
Which Walsin parts fit a marine sensor board’s 100 nF and 10 kilohm positions?
Five fit. For a 100 nF, 0603, 50 V decoupling capacitor and a 10 kilohm, 0603, 1 percent divider resistor on an exposed board, MT18B104K500 and ST18B104K500 fit the capacitor, and SR06X1002FTL and WR06X1002FTLV fit the resistor with both AEC-Q200 and anti-sulfur; MR06X1002FTL fits but lacks the anti-sulfur tag.
| Brief: exposed marine board, AEC-Q200, anti-sulfur where resistive | Walsin part | Series | Match / mismatch | Your incumbent |
|---|---|---|---|---|
| 100 nF, 0603, 50 V, X7R | MT18B104K500 |
MT automotive | Match | |
| Same, soft termination | ST18B104K500 |
ST automotive | Match, flex-crack resistant | |
| Same value, on our shelf | 0603B104K500 |
General purpose | Mismatch: commercial humidity regime | |
| 10 kΩ, 0603, ±1% | SR06X1002FTL |
SR anti-sulfuration | Match, AEC-Q200 and anti-sulfur | |
| 10 kΩ, 0603, ±1% | WR06X1002FTLV |
WR anti-sulfuration | Match, AEC-Q200 and anti-sulfur | |
| 10 kΩ, 0603, ±1% | MR06X1002FTL |
MR automotive | Mismatch: AEC-Q200 but no anti-sulfur tag | |
| Same value, on our shelf | WR06X1002FTL |
WR general purpose | Mismatch: no AEC-Q200, no anti-sulfur tag |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
Leave the last column for your current part. The two shelf rows suit indoor equipment, bench repairs and prototypes; for anything in the engine room or on deck, use the matched rows.
How Venatech helps: what can we supply to a Greek marine electronics team?
The capacitor and resistor list for a controller, retrofit or spares kit, crossed in one pass. Venatech is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, with special-requirement filters for soft termination and high temperature and a grade filter for AEC-Q200.
0603B104K500 and WR06X1002FTL are on our shelf in Hong Kong (snapshot 9 Nov 2026); the AEC-Q200 and anti-sulfur parts above are to order, so request a quote and we source them through our authorised Walsin channel. Paste your parts list into the cross-reference tool, upload a BOM at /bom/, or see the dated ready stock list. The chip resistor range page and MLCC range page list every series. We serve Greece from Hong Kong in small lots, which suits repair kits and retrofit batches, and we quote fast. We confirm availability, date code and lead time on each quote and promise none in advance; qualification stays with your engineers, and import questions with your compliance team.
The short version
- Greek owners placed 408 newbuilding orders in 2026 and hold 1,003 ships on order (Greek City Times, 4 October 2026, citing Xclusiv Shipbrokers).
- 85/85 means 85 °C, 85 percent humidity, rated voltage, typically 1,000 hours; Murata’s standard grade test is 40 °C for 500 hours.
- Moisture under bias fails MLCCs; sulfur opens thick film resistors. Choose AEC-Q200 capacitors and AEC-Q200 anti-sulfur resistors, then coat the board.
- Walsin lists 2,283 AEC-Q200 MLCC and 23,530 chip resistors tagged both AEC-Q200 and anti-sulfuration.
Send us the parts list from the controller you repair most often and we will return the Walsin crosses in qualified series, with every difference stated. Which board on your ships comes back with green corrosion first?
Related reading
- What AEC-Q200 actually certifies
- Anti-sulfuration resistors: SF thin film and SA arrays
- Flex cracking and board bend: why soft termination exists
- Cross-reference tool, BOM upload and ready stock snapshot
Last reviewed: 19 November 2026.
Sources
Fetched 19 November 2026.
- Greek City Times, Greek shipping enters new era as ship orders surpass 1,000, 4 October 2026: https://greekcitytimes.com/2026/10/05/greek-shipping-enters-new-era-as-ship-orders-surpass-1000/
- Murata, FAQ: difference between automotive grade and standard grade capacitors (undated page): https://www.murata.com/en-global/support/faqs/capacitor/ceramiccapacitor/part/0013
- Venatech MLCC upload files Venatech_MLCC_Upload_01.xlsx to _08.xlsx, chip resistor upload files Venatech_ChipR_Upload_01.xlsx to _79.xlsx and Walsin’s WTC_MLCC_Automotive_MT.pdf, ASC_SR.pdf, ASC_WR_V.pdf and ASC_MR.pdf datasheets as linked in the export, re-measured 19 November 2026; Venatech ready stock snapshot dated 9 November 2026.
Frequently asked questions
What is the 85/85 humidity test?
A test that holds a powered component at 85 °C and 85 percent relative humidity, typically at rated voltage for 1,000 hours, then checks for drift and insulation loss.
Does AEC-Q200 include a humidity test?
Yes. AEC-Q200 includes a biased humidity test, which is one reason automotive-qualified passives are a sensible start for marine electronics.
Why do chip resistors fail on ships?
Sulfur from fuel, exhaust and seals attacks the silver in standard thick film terminations until the resistor drifts open. Anti-sulfur constructions resist it.
How many Walsin resistors are both AEC-Q200 and anti-sulfur?
23,530 in our count of 19 November 2026, out of 41,147 tagged anti-sulfuration.
Which Walsin parts suit a 10 kilohm, 0603 resistor on a marine board?
SR06X1002FTL or WR06X1002FTLV, both 1 percent and tagged AEC-Q200 and anti-sulfuration.
Can Venatech supply marine electronics makers and workshops in Greece?
Yes. Venatech is the authorised Walsin distributor in Hong Kong and quotes small lots to Greece. Use the cross-reference tool or upload a BOM; confirm import rules with your compliance team.