NEWS

High-Q MLCC in Japan: October Exports Hit a Record 11.8 Trillion Yen on Chip and Chip-Equipment Demand, and 1,702 Walsin HH-Series Capacitors

Japan’s exports rose 20.5 percent in October 2026 to a record 11.8 trillion yen, Reuters reported on 18 November 2026, led by demand for chips and chipmaking equipment. RF stages in that equipment use high-Q capacitors: Walsin Technology (Walsin) lists 1,702 in its HH series. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for RF and power-electronics engineers in Japan, and the buyers who support them, at semiconductor-equipment, test-equipment and RF-module makers. Trade data is a macro story, not a capacitor story, and nothing here forecasts any company’s orders. What the October figures confirm is that Japanese equipment and component lines are running hard, and the RF sections of that equipment, from generators and matching networks to test fixtures, depend on low-loss C0G capacitors. On 19 November 2026 we re-measured Walsin’s MLCC export (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, 23,360 part numbers) against our ready-stock snapshot dated 9 November 2026.

What did Japan’s October 2026 trade data show?

A record month for exports. Reuters reported from Tokyo on 18 November 2026 that Japan’s exports rose 20.5 percent year on year in October to 11.8 trillion yen, the highest single-month total on record and the 14th straight monthly rise, beating a median forecast of 20 percent.

The same Reuters report says exports to the United States rose 23.9 percent and shipments to China rose 13.3 percent, and it attributes the strength to demand for semiconductors and chipmaking equipment. Imports rose 21.6 percent to 12.2 trillion yen, also a monthly record, driven by higher energy costs, leaving a trade deficit of 476.5 billion yen against a forecast of 956 billion yen. Reuters also notes that Japan’s economy shrank in the July to September quarter. We read the figures as a signal of activity on equipment and component lines, not as a forecast for any maker.

Why do chip-equipment exports matter to a high-Q MLCC buyer in Japan?

Because RF power and RF test both run on low-loss capacitors. Plasma etch and deposition tools are driven by RF generators and matching networks, and test and inspection systems carry RF front ends; in all of them a capacitor’s Q, or its ESR, turns directly into heat and lost signal.

A general-purpose C0G part is stable over temperature but is not specified for low loss at high frequency. Walsin’s HH series is: its datasheet (WTC_MLCC_HQ_Low_ESR_HH, September 2026) specifies Q of at least 1,000 for values of 30 pF and above, and at least 400 + 20C for smaller values, measured at 1 MHz. The datasheet lists mobile telecom, RF modules such as power amplifiers and VCOs, and tuners as applications; for RF power in equipment, qualify the part at your own frequency, voltage and current. Our guide to high-Q, low-ESR MLCC for RF explains how to read the ESR and Q curves.

How many Walsin high-Q MLCC are there, and how many reach 250 V?

One thousand seven hundred and two, with 159 at 250 V or more. We parsed all 23,360 rows of Walsin’s MLCC export and counted 1,702 distinct HH-series part numbers, all C0G/NP0, from 0.1 pF to 3,300 pF in 0201, 0402, 0603 and 0805; 159 of them, all 0805, are rated 250 V, 500 V or 630 V.

HH-series case Part numbers Rated voltages Of which 250 V or more
0201 217 10 V to 100 V 0
0402 508 10 V to 100 V 0
0603 514 10 V to 200 V 0
0805 463 50 V to 630 V 159 (66 at 250 V, 51 at 500 V, 42 at 630 V)
Total 1,702 159

We have not seen this cut counted anywhere else. The 0805 case is where Walsin’s high-Q range meets high voltage, which is what a matching-network node or a coupling position in an RF power path needs. The wider MLCC range holds the middle- and high-voltage C0G parts in larger cases if 630 V is not enough; our note on middle- and high-voltage MLCC from 200 V to 4 kV covers them.

Which 0805 high-Q MLCC fits a high-voltage RF matching node?

An HH21 part at 500 V or 630 V. For a brief of C0G, high Q, 0805, and a node that can see up to about 400 V peak, the 500 V and 630 V HH parts fit, the 250 V part needs a lower-voltage node, and an 0402 part is out of range.

Walsin part Case Capacitance Tolerance Rated V Match / mismatch for an 0805 high-Q node up to 400 V peak Your incumbent
HH21N4R7B631 0805 4.7 pF ±0.1 pF 630 V Match
HH21N220F501 0805 22 pF ±1 % 500 V Match, tight tolerance for tuning
HH21N101J631 0805 100 pF ±5 % 630 V Match, Q of 1,000 or more class
HH21N470J631 0805 47 pF ±5 % 630 V Match
HH21N4R7B251 0805 4.7 pF ±0.1 pF 250 V Mismatch at 400 V; match on a lower-voltage node; on our shelf
HH15N2R4B500 0402 2.4 pF ±0.1 pF 50 V Mismatch for a power node; match for a small-signal RF stage

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

Put your incumbent in the last column and confirm Q, ESR and voltage against both datasheets, then qualify at your operating frequency and RF current. Voltage derating on C0G is gentler than on X7R, as our NP0 vs X7R vs X5R note explains, but RF heating is not.

Which high-Q capacitors are on the shelf in Hong Kong?

Twenty-one HH-series lines. We checked all 1,702 HH-series part numbers against our ready-stock snapshot dated 9 November 2026: 21 were on our shelf in Hong Kong, across 0201, 0402, 0603 and 0805, including one 0805 part rated 250 V.

They include HH21N4R7B251 (0805, 4.7 pF, 250 V), HH21N330J500 (0805, 33 pF, 50 V), HH18N0R5B101 and HH18N6R2C101 (0603, 100 V), HH15N2R4B500 and HH15N360G500 (0402, 50 V), and HH03N0R4B500 (0201, 50 V). On our shelf in Hong Kong (snapshot 9 November 2026) means held on that date, not a promise of quantity or date code today. The 500 V and 630 V parts are to order: request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote.

How Venatech helps

How Venatech helps is a checked cross before the RF board is frozen. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a list of incumbent high-Q capacitors returns HH-series candidates with voltage and tolerance stated.

Paste your capacitor part numbers into the cross-reference tool, or upload the RF board BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve design and purchasing teams in Japan in small lots for prototypes and spares, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply.

The short version

Japan’s exports hit a record 11.8 trillion yen in October 2026, up 20.5 percent, on demand for chips and chipmaking equipment, Reuters reported on 18 November 2026. RF stages in that equipment use high-Q, low-ESR capacitors. Walsin lists 1,702 HH-series high-Q MLCC, 159 of them 0805 parts rated 250 V to 630 V, and 21 HH lines were on our shelf in Hong Kong on 9 November 2026.

Send us the capacitor list from your RF generator, matching network or test fixture and we will return HH-series crosses with Q class and voltage stated. Which capacitor in that path runs warmest today?

Related reading

Last reviewed: 19 November 2026

Sources

Fetched 19 November 2026.

  • Reuters (republished by 102.7 WBOW), “Japan exports set record in October on strong chip-related demand”, 18 November 2026: https://1027wbow.com/2026/11/17/japan-exports-set-record-in-october-on-strong-chip-related-demand/
  • Walsin HH-series datasheet, WTC_MLCC_HQ_Low_ESR_HH (10_High_Q_Low_ESR_HH.pdf), September 2026.
  • Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 19 November 2026; Venatech ready-stock snapshot dated 9 November 2026.

Frequently asked questions

How much did Japan’s exports rise in October 2026?

By 20.5 percent year on year to a record 11.8 trillion yen, Reuters reported on 18 November 2026, on demand for semiconductors and chipmaking equipment. It was the 14th straight monthly rise.

What is a high-Q MLCC?

A C0G capacitor built for low loss at high frequency. Walsin’s HH-series datasheet specifies Q of at least 1,000 at 30 pF and above, measured at 1 MHz.

How many Walsin high-Q MLCC are there?

We counted 1,702 distinct HH-series part numbers, all C0G/NP0, from 0.1 pF to 3,300 pF in 0201 to 0805, rated 10 V to 630 V.

Does Walsin make a high-Q MLCC rated 630 V?

Yes. We counted 42 HH-series parts at 630 V, all in 0805, plus 51 at 500 V and 66 at 250 V. Confirm voltage and RF current on the datasheet.

Which Walsin high-Q capacitors are in stock in Hong Kong for buyers in Japan?

Twenty-one HH-series lines were on our shelf in Hong Kong in the snapshot dated 9 November 2026, including HH21N4R7B251. Availability moves, so we confirm it on each quote.

Is Venatech an authorised Walsin distributor for buyers in Japan?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Japan in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!