NEWS

Chip Resistor Array for Memory and Computer Boards in Brazil: Abisemi Sees 14 Billion Reais of Chip Revenue in 2026, and 3,054 Walsin 0402 Quad Arrays

Brazil’s semiconductor industry expects 14 billion reais of revenue in 2026, its association Abisemi said on 17 November 2026, with locally packaged memory in about 90 percent of computers made in Brazil. Memory boards lean on chip resistor arrays: Walsin Technology (Walsin) lists 3,054 in the 0402 quad layout. Venatech is the authorised Walsin distributor in Hong Kong.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for hardware engineers and component buyers in Brazil at memory-module, PC, notebook and smartphone makers in Manaus, Sao Paulo, Campinas and Rio Grande do Sul. An industry forecast is not a component forecast, and this is perspective rather than tax or customs advice. What the Abisemi figures show is that memory is packaged in Brazil at real scale, and memory modules and the motherboards they plug into use resistor arrays by the reel. On 19 November 2026 we re-measured Walsin’s chip-resistor export (Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx) and checked every array against our ready-stock snapshot dated 9 November 2026.

What did Abisemi say about Brazil’s semiconductor industry?

Fourteen billion reais of revenue this year. TeleSíntese reported on 17 November 2026 that Abisemi, Brazil’s semiconductor industry association, told a Chamber of Deputies hearing that the national semiconductor sector will invoice 14 billion reais in 2026.

According to the same report, Abisemi’s president also projected 500 million reais of research and development, 500 million reais of investment in machinery and equipment, and 200 million reais of exports by the end of 2026. He said locally developed and packaged memory chips and other semiconductor components are in about 90 percent of computers made in Brazil and in at least half of the smartphones made in the country. The hearing marked 35 years of the Lei de TICs, whose current incentives run to the end of 2029; Abisemi wants them extended to 2073. TeleSíntese notes that these are sector estimates, not consolidated results, and that the percentages refer to equipment made in Brazil.

Why does Brazilian memory packaging matter to a chip resistor array buyer?

Because memory buses are terminated in arrays. A memory module or the motherboard around it typically uses chip resistor arrays for series termination on data and address lines, and for pull-ups and pull-downs, because one 0402 quad array replaces four discrete resistors in less board area.

If about 90 percent of computers made in Brazil carry locally packaged memory, as Abisemi says, the module and PC lines in Manaus and Sao Paulo are continuous users of these parts. We make no forecast about any Brazilian packager, module house or PC maker. The practical questions for a local buyer are a second source for each array, the convex or concave terminal style the footprint was drawn for, and whether an anti-sulfuration grade is needed for boards that will live in polluted or humid air. Our guide to chip resistor arrays explained covers the layouts, and resistor arrays vs discrete covers when an array is the right call.

How many Walsin chip resistor arrays come in the 0402 quad layout?

Three thousand and fifty-four part numbers. We parsed the full chip-resistor export and counted 10,022 distinct chip resistor arrays; 3,054 of them are four-element arrays on 0402 elements, across five catalogue series including automotive and anti-sulfuration grades.

Walsin 0402 × 4 array series Part numbers Terminal style Element rating
Thick Film Chip Resistor Array, Convex type (two catalogue listings) 1,399 Convex 1/16 W
Thick Film Chip Resistor Array, Concave type 269 Concave 1/16 W
Thick Film Chip Resistor Array, Convex Type (Automotive) 693 Convex 1/16 W (one part at 1/10 W)
Anti-Sulfuration Thick Film Chip Resistor Array, Convex Type 693 Convex 1/16 W
Total 3,054

For the two values memory buses use most, 22 Ω and 33 Ω, the export holds 10 part numbers each. We have not seen this cut counted anywhere else. Some Walsin array part numbers carry an embedded space, so type them exactly as the export spells them; the full chip resistor range shows the 0603 quad and 0201 layouts as well. Take element ratings and tolerances from Walsin’s datasheet for the array family, not from the export alone.

Which 0402 quad array fits a 33 Ω memory-bus termination?

A ±1 percent convex array is the usual start. For a brief of 33 Ω, 0402 × 4, convex footprint, on a PC or memory board built in Manaus, four Walsin ±1 percent parts fit directly and one changes the footprint; the sixth row shows a common mix-up.

Walsin part Series Resistance Tolerance Terminal Match / mismatch for a 33 Ω 0402 × 4 convex memory-bus termination Your incumbent
WA04X33R0FTL Array, Convex 33 Ω ±1 % Convex Match
WA04X33R0FTLJ Array, Convex 33 Ω ±1 % Convex Match, alternative listing
SA04X33R0FTL Anti-Sulfuration Array 33 Ω ±1 % Convex Match, for humid or sulphur-bearing air
MA04X33R0FTL Array, Automotive 33 Ω ±1 % Convex Match, AEC-Q200 tagged
WA04T33R0FTL Array, Concave 33 Ω ±1 % Concave Mismatch on a convex footprint; match on concave
WA04X1002FTL Array, Convex 10 kΩ ±1 % Convex Mismatch: a pull-up value, not a termination

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

Put your incumbent in the last column and confirm element power, tolerance and land pattern against both datasheets; Walsin’s array datasheet gives the recommended land pattern for convex and concave parts. If your data lines use 22 Ω, WA04X22R0FTL is the same family at that value. Our note on anti-sulfuration resistors and SA arrays explains when the anti-sulfuration grade earns its place.

Which resistor arrays are on the shelf in Hong Kong?

Three arrays. We checked all 10,022 Walsin arrays against our ready-stock snapshot dated 9 November 2026: three were on our shelf in Hong Kong, two of them 0402 quad parts at 30 Ω and 33 Ω, both ±5 percent.

The three are WA04X330 JTL (33 Ω ±5 %, 0402 × 4 convex), WA04X300 JTL (30 Ω ±5 %, 0402 × 4 convex) and WA06X221 JTL (220 Ω ±5 %, 0603 × 4 convex); each carries a space inside the part number in Walsin’s export. The 33 Ω ±5 percent part fits a termination brief where ±1 percent is not required. On our shelf in Hong Kong (snapshot 9 November 2026) means held on that date, not a promise of quantity today. The ±1 percent and anti-sulfuration parts are to order: request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote.

How Venatech helps

How Venatech helps is a checked cross before the next build. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a list of incumbent resistor arrays returns Walsin candidates with value, tolerance and terminal style stated.

Paste your array part numbers into the cross-reference tool, or upload the whole module or motherboard BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, serve buyers in Manaus, Sao Paulo and Campinas in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply. For anything about Lei de TICs or Zona Franca de Manaus rules, confirm with your compliance team.

The short version

Abisemi expects Brazil’s semiconductor sector to invoice 14 billion reais in 2026, TeleSíntese reported on 17 November 2026, with locally packaged memory in about 90 percent of computers made in Brazil. Memory and PC boards use chip resistor arrays for termination and pull-ups. Walsin lists 3,054 arrays in the 0402 quad layout, 10 each at 22 Ω and 33 Ω, and a 33 Ω quad array was on our shelf in Hong Kong on 9 November 2026.

Send us the array part numbers from your current module or motherboard and we will return Walsin crosses with terminal style stated. Which array on that board has only one approved source today?

Related reading

Last reviewed: 19 November 2026

Sources

Fetched 19 November 2026.

  • TeleSíntese, “Semicondutores devem faturar R 14 bilhões no Brasil em 2026, projeta Abisemi”, 17 November 2026: https://telesintese.com.br/semicondutores-devem-faturar-r-14-bilhoes-no-brasil-em-2026-projeta-abisemi/
  • Walsin chip-resistor export, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, re-measured 19 November 2026; Venatech ready-stock snapshot dated 9 November 2026.

Frequently asked questions

How big is Brazil’s semiconductor industry in 2026?

Abisemi expects 14 billion reais of revenue in 2026, TeleSíntese reported on 17 November 2026, with 500 million reais each of R&D and equipment investment and 200 million reais of exports. These are sector estimates.

What is a chip resistor array used for on a memory board?

Mostly series termination on data and address lines, plus pull-ups and pull-downs. One 0402 quad array replaces four discrete resistors in less board area.

How many Walsin chip resistor arrays come in 0402 × 4?

We counted 3,054 distinct part numbers in the 0402 quad layout, including 693 automotive and 693 anti-sulfuration parts, out of 10,022 Walsin arrays in all.

What is the difference between convex and concave resistor arrays?

The terminal shape, which sets the land pattern. A concave part on a convex footprint is a mismatch even at the same value and tolerance, so check the land pattern on the datasheet before crossing.

Are Walsin 33 Ω resistor arrays in stock in Hong Kong for buyers in Brazil?

A 33 Ω ±5 percent 0402 quad array was on our shelf in Hong Kong in the snapshot dated 9 November 2026. The ±1 percent parts are to order; we confirm availability on each quote.

Is Venatech an authorised Walsin distributor for buyers in Brazil?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Brazil in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!