NEWS

Soft Termination Capacitor for Defence Electronics in France: Cicor Wins Two Multi-Year Programmes, and Walsin Lists 1,671 Soft-Termination MLCC

A soft termination capacitor protects French defence boards from flex cracks, and Walsin Technology (Walsin) lists 1,671 of them in three series, SH, SG and ST; a 100 nF, X7R, 0805 brief at 50 V or 100 V returns 9 soft options. Venatech, Walsin’s authorised distributor in Hong Kong, crosses and quotes them.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for a hardware or reliability engineer in France whose boards must survive vibration, shock and wide temperature swings, and who has found a cracked capacitor at the end of an environmental test. We parsed Walsin’s MLCC export 00_ALL_MLCC_parts_combined.xlsx (24,026 rows, 23,601 distinct part numbers) and our stock snapshot as at 9 November 2026. The news fact names its source and date; we fetched it on 16 November 2026.

What did Cicor win in French defence electronics?

Two multi-year defence programmes. Evertiq reported on 11 November 2026 that Swiss EMS provider Cicor has won two multi-year defence programmes, one from a new customer, to be produced at its sites in France and the UK, and that they are expected to bring close to 20 million Swiss francs of revenue from as early as 2027.

The report says the awards strengthen Cicor’s position in the French aerospace and defence market, and that its book-to-bill for the first nine months of 2026 was 1.17. It names neither customer nor product, and we do not guess at them. For an engineer in France, the useful signal is that defence electronics production keeps moving into multi-year EMS contracts, and those builds are qualified once and then run for years, so a capacitor choice made now has to survive the whole programme.

Why do defence boards in France crack ceramic capacitors?

Because the board bends and the ceramic does not. A standard MLCC has rigid metal terminations bonded straight to a brittle ceramic body, so board flex from depaneling, screw-down, connector insertion, vibration or thermal cycling puts tensile stress at the termination edge and starts a crack that may only open after deployment.

Defence and aerospace boards in France are often thick, densely populated and bolted to metal chassis or wedge-locked into racks. They also see random vibration and shock in qualification, then years of thermal cycling. The crack typically starts under the termination and runs diagonally into the electrodes; the part can still pass a capacitance test and then fail short later. A soft termination capacitor adds a conductive polymer layer inside the termination that absorbs much of that strain. Our guide to soft termination MLCC: SH, SG, ST and VT explains the structure, and MLCC reflow profile and mounting covers the assembly side of crack prevention.

How many soft termination capacitors does Walsin list?

1,671 part numbers. We counted 1,671 distinct soft-termination MLCC part numbers in Walsin’s export: 1,488 in the SH series (silver-polymer), 118 in the ST series, which Walsin describes as automotive and qualified to AEC-Q200, and 65 in the SG series (copper-polymer); 1,193 of them are X7R and 449 are NP0.

Walsin soft-termination MLCC by case size Part numbers
0402 82
0603 299
0805 369
1206 510
1210 174
1808 and 1812 156
1825, 2220 and 2225 81
Total 1,671

The weight sits in 0805 and 1206, which is where flex cracks are most common on dense defence boards: 879 of the 1,671 parts are in those two sizes. We have not seen Walsin’s soft-termination range split by case size anywhere else. The full MLCC range lists every family.

Which Walsin parts cross a 100 nF, 0805, X7R brief with soft termination?

Nine of 24. We filtered the export to 100 nF, X7R, 0805 at 50 V or 100 V and counted 24 distinct part numbers; nine carry soft termination: five SH parts, two SG parts and two ST parts, the last two described by Walsin as qualified to AEC-Q200.

The table shows the soft options against two standard parts. Put your incumbent in the last column.

Walsin part Series Rated voltage Tolerance Match / mismatch with a 100 nF, X7R, 0805, flex-risk position Your incumbent
SH21B104K101 SH soft termination 100 V 10% Match, soft termination, higher voltage
SH21B104J101 SH soft termination 100 V 5% Match, tighter tolerance
SH21B104K500 SH soft termination 50 V 10% Match, soft termination
SG21B104K500 SG soft termination 50 V 10% Match, copper-polymer layer
SG21B104K101 SG soft termination 100 V 10% Match, copper-polymer layer
ST21B104K101 ST soft termination, automotive 100 V 10% Match, qualified to AEC-Q200
ST21B104K500 ST soft termination, automotive 50 V 10% Match, qualified to AEC-Q200
MT21B104K500 MT automotive 50 V 10% Mismatch: standard termination
0805B104K500 General purpose 50 V 10% Mismatch: standard termination

The soft parts list a nominal 1.25 mm thickness, the same as MT21B104K500, while the general-purpose 0805B104K500 lists 0.80 mm, so check placement height and any keep-out before swapping from a thin incumbent. Confirm against both datasheets and qualify in your own circuit, including your own vibration and thermal-cycling profile.

When is a soft termination capacitor not enough?

When the stress is not board flex. A soft termination capacitor reduces flex cracks from bending, but it does not fix thermal shock from hand soldering, cracks from pick-and-place nozzle force, or voids from a poor reflow profile, and it adds a small series resistance that matters on high-ripple rails.

Check four things alongside the part change. Hand rework with a hot iron straight on the termination can crack any MLCC, soft or not. Placement force on thin, large parts should be set low. Orientation matters: a capacitor placed parallel to a board edge or a V-score sees more strain than one placed across it. And on a high-current switching rail, compare ripple ratings on both datasheets before you swap. Where the programme calls for automotive-grade evidence as a baseline, the ST parts give you an AEC-Q200 qualification report to request; our note on AEC-Q200 MLCC: MT vs MG series explains what the qualification does and does not cover.

Which soft termination capacitors are on the Hong Kong shelf?

Twenty-nine lines. Our stock snapshot as at 9 November 2026 holds 29 Walsin soft-termination lines, from 0402 to 2220, including SH18B104K500 at 100 nF and 50 V in 0603, SH21B474K250 at 470 nF and 25 V in 0805, and SH31B154K101 at 150 nF and 100 V in 1206.

They are on our shelf in Hong Kong (snapshot 9 Nov 2026) and suit qualification samples and first-article builds. The 0805 parts in the table are to order: request a quote and we source them through our authorised Walsin channel. The ready-stock list is a dated snapshot, never live-synced; we confirm availability, date code and lead time on each quote and make no stock, price or delivery promise.

How Venatech helps

How Venatech helps a defence or EMS team in France is a soft-termination cross with every difference written down. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin; filter for soft termination and every difference from your original is stated.

Paste your capacitor codes into the cross-reference tool, or upload the whole BOM and request a quote through the site. Check the ready-stock snapshot, dated 9 November 2026. We serve French teams from Hong Kong, in small lots with fast quotes. Walsin is the line we are authorised for; Stackpole and Viking are lines we supply. We give no export-control, ITAR, customs or compliance advice; confirm that with your own compliance team.

The short version

Evertiq reported on 11 November 2026 that Cicor won two multi-year defence programmes to be built at its sites in France and the UK. Defence boards flex, vibrate and cycle in temperature for years, and that cracks ceramic capacitors. Walsin covers the soft termination capacitor brief with 1,671 parts in three series, and a 100 nF, X7R, 0805 line at 50 V or 100 V returns nine soft options.

Send us the capacitor positions near your board edges, mounting holes and connectors, and we will return soft-termination crosses with every difference stated. Which of your 0805 positions failed first in vibration test?

Related reading

Last reviewed: 16 November 2026

Sources

Fetched 16 November 2026.

  • Evertiq, “Cicor wins two multi-year defence programmes and completes Malaysia deal”, 11 November 2026: https://evertiq.com/news/2026-11-11-cicor-wins-two-multi-year-defence-programmes-and-completes-malaysia-deal
  • Walsin MLCC export, 00_ALL_MLCC_parts_combined.xlsx, re-measured 16 November 2026; Venatech stock snapshot as at 9 November 2026.

Frequently asked questions

What did Cicor win in French defence electronics in November 2026?

Evertiq reported on 11 November 2026 that Cicor won two multi-year defence programmes, one from a new customer, to be built at its sites in France and the UK, worth close to 20 million Swiss francs from as early as 2027.

What is a soft termination capacitor?

It is an MLCC with a conductive polymer layer inside its end terminations. When the board bends, the layer absorbs strain that would otherwise crack the ceramic body. Capacitance, dielectric and voltage ratings are unchanged.

How many soft termination capacitors does Walsin offer for defence boards in France?

We counted 1,671 Walsin soft-termination MLCC: 1,488 SH, 118 ST and 65 SG, from 0402 to 2225. Venatech crosses and quotes them from Hong Kong for teams in France.

Which Walsin part crosses a 100 nF X7R 0805 capacitor with soft termination?

SH21B104K101 or SG21B104K101 at 100 V, SH21B104K500 or SG21B104K500 at 50 V, and ST21B104K101 or ST21B104K500 if you want AEC-Q200 qualification. Confirm against both datasheets.

Does a soft termination capacitor stop every MLCC crack?

No. It reduces cracks from board flex. It does not prevent damage from hand-soldering thermal shock, excessive placement force or a poor reflow profile, so those still need process control.

Is Venatech an authorised Walsin distributor?

Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong and serves teams in France in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!