NEWS

AEC-Q200 MLCC for Automotive and Industrial Boards in the USA: GlobalFoundries Breaks Ground on a 900,000-Wafer New York Fab, and Walsin Lists 2,283 Qualified Parts

For an AEC-Q200 MLCC on an automotive or industrial board designed in the USA, Walsin Technology (Walsin) lists 2,283 distinct parts in its MT and ST series, and nine of them fit a 100 nF, X7R, 0603 brief at 50 V or more. Venatech, the authorised Walsin distributor in Hong Kong, crosses and quotes them.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for USA design and component engineers who build the boards that automotive and industrial chips end up on. The news is a fab groundbreaking in upstate New York. The question it raises for a passives buyer is narrower and more practical: when a new chip comes into an automotive or industrial design, which capacitors around it carry AEC-Q200 qualification, and what crosses? We re-measured Walsin’s MLCC export (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_07.xlsx, 23,360 distinct part numbers) and our stock list as at 9 November 2026 on 16 November 2026.

What did GlobalFoundries start building in New York on 13 November 2026?

A 300 mm fab in Malta, New York. GlobalFoundries announced on 13 November 2026 that it had broken ground on the first of two new 300 mm fabs at its Malta site under a United States and Japan investment initiative of up to 21 billion US dollars, with the first fab expected to add about 900,000 wafers a year and come online in 2029.

The release says Japan provides the investment and GlobalFoundries the technology and operations, that the first phase is about 10 billion US dollars with 570 million US dollars of New York State incentives, and that the plant targets automotive, industrial and connected-infrastructure chips. The briefing that carried the story on 15 November 2026 (Ayoka Systems Manufacturing Daily Briefing) repeats those markets. We add no forecast, name no customer of the fab, and make no claim about where any chip from it will be used.

Why does a new automotive chip fab in the USA raise an AEC-Q200 MLCC question?

Because chips for cars arrive with a passive bill of materials. Every automotive or industrial microcontroller, power stage or sensor interface needs decoupling, filtering and timing capacitors around it, and an automotive programme will usually ask for capacitors qualified to AEC-Q200, the stress-test standard for passive components; that is a second qualification step separate from the chip.

That matters in 2029, not today, but a USA hardware team that is picking platforms now will pick capacitors in the same pass. The habit that pays is to settle the passives that sit around a new chip early, with a qualified option and a commercial option side by side, so that a later re-spin does not start with a blank column. Our pillar on what AEC-Q200 actually certifies explains the test groups, and AEC-Q200 MLCC: MT vs MG series shows how Walsin splits its automotive capacitors. The full MLCC range lists every family.

How many AEC-Q200 MLCC does Walsin list?

2,283 part numbers. We counted 2,283 distinct MLCC part numbers in the two Walsin series whose names state qualification to AEC-Q200: 2,167 in the MT series and 116 in the ST soft-termination series. A separate MG series of 783 parts is named by Walsin as automotive without AEC-Q200.

Walsin automotive MLCC series Part numbers Fit for an AEC-Q200 position
MT, qualified to AEC-Q200 2,167 Match
ST soft termination, qualified to AEC-Q200 116 Match, adds flex protection
MG, automotive, named without AEC-Q200 783 Mismatch where AEC-Q200 is required
MT plus ST 2,283

The ST series is the one to know for a board that bends: soft termination puts a polymer layer in the end caps to absorb strain from depaneling, press-fit and screw torque. Flex cracking and board bend explains why that matters near connectors.

Which Walsin AEC-Q200 MLCC cross a 100 nF, X7R, 0603 brief?

Nine at 50 V or more. We filtered the export for 100 nF, X7R, 0603 in the AEC-Q200 series and found 17 parts from 10 V to 100 V; nine are rated 50 V or more, including MT18B104K500 and ST18B104K500 at 50 V and MT18B104K101 and ST18B104K101 at 100 V.

The table sets them against two general-purpose parts that match on value and case but not on qualification. Put your incumbent in the last column.

Walsin part Series Rated voltage Tolerance Match / mismatch with a 100 nF, X7R, 0603, AEC-Q200 brief Your incumbent
MT18B104K500 MT, qualified to AEC-Q200 50 V 10% Match
MT18B104J500 MT, qualified to AEC-Q200 50 V 5% Match, tighter tolerance
ST18B104K500 ST soft termination, qualified to AEC-Q200 50 V 10% Match, plus soft termination
MT18B104K101 MT, qualified to AEC-Q200 100 V 10% Match, more DC-bias headroom on a 48 V rail
ST18B104K101 ST soft termination, qualified to AEC-Q200 100 V 10% Match, soft and 100 V
0603B104K500 General purpose 50 V 10% Mismatch: not in an AEC-Q200 series
SH18B104K500 SH soft termination, general 50 V 10% Mismatch: soft, but not in an AEC-Q200 series

On a 12 V or 24 V automotive rail, the 50 V parts leave room for load-dump transients and DC-bias loss; on a 48 V rail, look at the 100 V rows first. Our note on MLCC DC bias and voltage derating shows why. Confirm against both datasheets and qualify in your own circuit.

What does qualified to AEC-Q200 mean for a USA buyer?

It means the series passed the stress tests, not that your design did. Walsin describes the MT and ST series as qualified to AEC-Q200; that statement applies to the series as tested by the manufacturer, and a USA automotive buyer should request the qualification report for the exact part number and run its own PPAP approval steps.

Put plainly: AEC-Q200 is a manufacturer’s qualification, so the paperwork you want is Walsin’s report for the part number on your drawing. Venatech makes no qualification claim of its own. What we add is traceability: original sealed Walsin packaging, lot and date code on each shipment, and a certificate of conformity on request. We have not seen a USA automotive approval that skipped the part-number report, so ask for it at quote stage, not at PPAP.

What can a USA engineer prototype with from the Hong Kong shelf?

General-purpose bench parts. Our stock list as at 9 November 2026 holds seven Walsin 100 nF, 0603 lines, including 0603B104K500 and 0603B104K101 (X7R, 50 V and 100 V) and SH18B104K500 (soft termination, 50 V), all on our shelf in Hong Kong (snapshot 9 Nov 2026).

They suit an early bench build where qualification does not yet matter, and they share the MT parts’ case and value, so the footprint carries straight over. The AEC-Q200 parts in the table are to order: request a quote and we source them through our authorised Walsin channel. The ready-stock list is a dated snapshot, never live-synced, and we make no stock or lead-time promise.

How Venatech helps

How Venatech helps is a qualified cross with the commercial option beside it. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin; filter by commercial or automotive grade and the AEC-Q200 version is listed beneath where one exists.

Paste your capacitor codes into the cross-reference tool, or upload the whole BOM and request a quote. Check the ready-stock snapshot, dated 9 November 2026. We serve USA design teams and EMS buyers from Hong Kong, in small lots with fast quotes. Walsin is our authorised line; Stackpole and Viking are lines we supply. We give no customs, tariff or compliance advice; confirm that with your compliance team.

The short version

GlobalFoundries broke ground on 13 November 2026 on a 300 mm fab in Malta, New York, aimed at automotive, industrial and connected-infrastructure chips, with about 900,000 wafers a year from 2029. Those chips will need qualified capacitors around them. Walsin covers the AEC-Q200 MLCC brief with 2,283 MT and ST parts, nine of them a 100 nF, 0603 fit at 50 V or more.

Send us the capacitors around your next automotive or industrial chip, and we will return AEC-Q200 crosses with the commercial option beside each. Which of your 0603 positions still has no qualified alternative?

Related reading

Last reviewed: 16 November 2026

Sources

Fetched 16 November 2026.

  • GlobalFoundries, groundbreaking release for the first new fab at Malta, New York, 13 November 2026: https://gf.gcs-web.com/node/11406/pdf
  • Ayoka Systems, Manufacturing Daily Briefing, 15 November 2026: https://ayokasystems.com/news/ayoka-daily-briefing-2026-11-15/
  • Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_07.xlsx, re-measured 16 November 2026; Venatech stock list as at 9 November 2026.

Frequently asked questions

What is GlobalFoundries building in Malta, New York?

GlobalFoundries announced on 13 November 2026 that it had broken ground on the first of two new 300 mm fabs in Malta, New York, expected to add about 900,000 wafers a year from 2029 for automotive, industrial and connected-infrastructure chips.

How many AEC-Q200 MLCC does Walsin offer?

We counted 2,283 distinct parts in the two Walsin series named as qualified to AEC-Q200: 2,167 MT and 116 ST soft termination. Venatech crosses and quotes them for USA design teams from Hong Kong.

Which Walsin AEC-Q200 MLCC crosses a 100 nF X7R 0603 capacitor?

Nine parts at 50 V or more, including MT18B104K500 and ST18B104K500 at 50 V, and MT18B104K101 and ST18B104K101 at 100 V. Confirm against both datasheets and qualify in your own circuit.

Is the Walsin MG series qualified to AEC-Q200?

No. Walsin names the MG series as automotive without AEC-Q200, so it does not fit a position that requires AEC-Q200. Use the MT or ST series there.

Does Venatech provide AEC-Q200 qualification reports?

We request Walsin’s qualification report for the exact part number on your drawing. Venatech makes no qualification claim of its own; we supply lot and date-code traceability and a certificate of conformity on request.

Is Venatech an authorised Walsin distributor for USA buyers?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves USA buyers in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!