NEWS

Y1 Safety Capacitor for EV Chargers in Canada: the Federal Budget Backs 55,000 New Chargers, and Walsin Lists 181 X1/Y1 Disc Capacitors

For a Y1 safety capacitor in an EV charger built in Canada, Walsin Technology (Walsin) lists 181 X1/Y1 ceramic disc part numbers, and 125 of them carry a Y1 rating of 400 Vac or more. Venatech, Walsin’s authorised distributor in Hong Kong, crosses and quotes them for Canadian charger makers.


Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for a power-electronics, compliance or purchasing engineer in Canada who designs or second-sources the line filter and isolation stage of an EV charger. We parsed Walsin’s disc capacitor export Walsin_DiscCap_ALL.xlsx (929 rows), its MLCC export 00_ALL_MLCC_parts_combined.xlsx, and our stock snapshot as at 9 November 2026. The news was fetched on 17 November 2026.

What did the federal budget set aside for EV chargers in Canada?

About 635 million Canadian dollars for charging. Electrek reported on 12 November 2026 that Canada’s proposed federal budget sets aside about 4 billion Canadian dollars for grid and electricity infrastructure, with about 635 million earmarked for EV charging and support for more than 55,000 new chargers.

The same report says 587 million Canadian dollars of that would renew the Zero-Emission Vehicle Infrastructure Program (ZEVIP), which funds public charging stations and covers up to 50 percent of eligible costs for most projects, and up to 75 percent for projects led by Indigenous developers, with caps of up to 2 million Canadian dollars per project. The grid spending runs over ten years, from 2027 through 2036. For a Canadian charger maker, that is a decade of public projects that each need a certified power stage, and every power stage needs safety capacitors.

Where does a Y1 safety capacitor sit in an EV charger?

Across the insulation barrier, mostly. A Y1 safety capacitor bridges reinforced or double insulation, typically from the primary side of an isolated DC-DC converter to the secondary or to chassis, where it gives common-mode noise a short path; Y2 parts usually sit line-to-earth on basic insulation in the EMI filter.

That distinction matters more in a charger than in most products. A Level 2 wallbox has an EMI filter at the AC input, where Y2 parts are common line-to-earth. A DC fast charger adds isolated power modules, and the capacitor across their transformer barrier is the classic Y1 position because a failure there must not put the user on the wrong side of the insulation. Our note on X1/Y1 versus X1/Y2 safety capacitors explains the classes, and disc versus chip Y capacitors compares the two body styles.

How many Y1 safety capacitors does Walsin list?

181 part numbers, in five series. We counted 181 distinct X1/Y1 disc part numbers in Walsin’s export. 56 are rated Y1 250 Vac, 56 are Y1 400 Vac, 54 are Y1 500 Vac with a 1,500 Vdc rating, and 15 are the AS series at X1 760 Vac and Y1 500 Vac.

Walsin X1/Y1 disc capacitors, measured 17 Nov 2026 Rating as listed Part numbers
AH series and AH small size X1 400 Vac / Y1 250 Vac 56
AH series and AH small size X1 400 Vac / Y1 400 Vac 56
AH 500 V series and small size X1 500 Vac / Y1 500 Vac, 1,500 Vdc 54
AS series X1 760 Vac / Y1 500 Vac 15
Total X1/Y1 181
Of which Y1 400 Vac or more 125

The dielectrics split four ways: 63 in SL (class I), 53 in Y5U, 50 in Y5P and 15 in Y5V. Values run from 10 pF to 10 nF, with 1,000 pF the most common value at 18 part numbers. We have not seen the Walsin Y1 range split by rating this way elsewhere. The full disc capacitor range lists every family.

Which Walsin parts cross a 2,200 pF Y1 brief for a 600 V supply?

Six parts clear the rating, and two do not. We filtered the export to 2,200 pF and checked each row against a brief for a charger fed from a 600 V three-phase supply, where line-to-ground is about 347 V: 2,200 pF, Y1 class, a Y1 rating of 400 Vac or more. Six rows match.

Walsin part Series Dielectric Rating as listed Match / mismatch with a 2,200 pF, Y1 400 Vac or more brief Your incumbent
YU1AH222M090 AH Y5U X1 400 / Y1 400 Vac Match
YU1AH222M080 AH small size Y5U X1 400 / Y1 400 Vac Match, smaller body
YV1AH222M080 AH Y5V X1 400 / Y1 400 Vac Match on rating; Y5V drifts more with temperature
YU5AH222M090 AH 500 V Y5U X1 500 / Y1 500 Vac, 1,500 Vdc Match, more margin
YU5AH222M080 AH 500 V small size Y5U X1 500 / Y1 500 Vac, 1,500 Vdc Match, more margin, smaller body
YU0AS222M120 AS Y5U X1 760 / Y1 500 Vac Match, highest X1 rating
YU0AH222M090 AH Y5U X1 400 / Y1 250 Vac Mismatch: Y1 250 Vac is below 347 V
S252B222K502 S2 chip, 2211 X7R X1/Y2 class Mismatch: Y2, not Y1; on our shelf in Hong Kong (snapshot 9 Nov 2026)

On a 208 V or 240 V supply, the Y1 250 Vac parts come back into play, and the chip part may suit a Y2 filter position instead. Cold matters in Canada too: Y5V loses more capacitance at low temperature than Y5U or Y5P, so an outdoor charger that must meet an EMI limit at minus 30 °C may prefer Y5P or Y5U. Confirm against both datasheets and qualify in your own circuit.

What should a Canadian charger team check before it swaps a Y capacitor?

Four things, all on paper before the bench. Check the safety class against the insulation the part bridges, the Y rating against the real line-to-ground voltage, the certificate listing against the standards your charger must meet, and the total Y capacitance against your touch-current budget.

The class comes first: a Y2 part in a Y1 position is not a cross, whatever its capacitance. The voltage comes second, and Canada’s mix of 120/240 V, 208 V and 347/600 V supplies means one charger platform can need two different Y parts. Third, the certificate: Walsin names these series safety-certificated, but the certificate number, standard and listing must come from Walsin’s datasheet and be confirmed by your compliance team; we give no certification or compliance advice. Fourth, touch current: every picofarad from line to chassis adds leakage, so a higher value is not a free upgrade.

Which Walsin safety capacitors are on the Hong Kong shelf?

One chip safety line, with discs to order. Our stock snapshot as at 9 November 2026 holds S252B222K502, a 2,200 pF X1/Y2 chip safety capacitor in 2211 from Walsin’s S2 series, which lists 165 distinct part numbers. The X1/Y1 disc parts above are to order.

S252B222K502 is on our shelf in Hong Kong (snapshot 9 Nov 2026) and suits Y2 filter positions in prototypes. For the Y1 discs, request a quote and we source them through our authorised Walsin channel. The ready-stock list is a dated snapshot, never live-synced, and we make no stock, price or lead-time promise; we confirm availability, date code and lead time on each quote.

How Venatech helps

How Venatech helps a charger maker in Canada is a Y1 safety capacitor cross with the class and rating stated. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin; each cross states where the Walsin part differs from your original.

Paste your safety capacitor codes into the cross-reference tool, or upload the whole BOM and request a quote through the site. Check the ready-stock snapshot, dated 9 November 2026. We serve Canadian teams from Hong Kong, in small lots with fast quotes. Walsin is the line we are authorised for; Stackpole and Viking are lines we supply.

The short version

Electrek reported on 12 November 2026 that Canada’s proposed budget sets aside about 635 million Canadian dollars for EV charging and backs more than 55,000 new chargers. Each charger’s isolation stage needs a Y1 safety capacitor. Walsin lists 181 X1/Y1 disc parts, 125 of them rated Y1 400 Vac or more, and a 2,200 pF brief for a 600 V supply returns six.

Send us your Y capacitor lines with the supply voltage, and we will return Walsin crosses with class and rating stated. Which of your chargers runs from a 347/600 V supply?

Related reading

Last reviewed: 17 November 2026

Sources

Fetched 17 November 2026.

  • Electrek, report on EV charger and grid funding in Canada’s proposed federal budget, 12 November 2026: https://electrek.co/2026/11/12/latest-canadian-budget-packs-funding-for-55000-new-ev-chargers/
  • Walsin disc capacitor export, Walsin_DiscCap_ALL.xlsx, and MLCC export, 00_ALL_MLCC_parts_combined.xlsx, re-measured 17 November 2026; Venatech stock snapshot as at 9 November 2026.

Frequently asked questions

What did Canada’s budget set aside for EV chargers?

Electrek reported on 12 November 2026 that the proposed federal budget earmarks about 635 million Canadian dollars for EV charging, including 587 million to renew ZEVIP, and supports more than 55,000 new chargers, within about 4 billion Canadian dollars for the grid.

What does a Y1 safety capacitor do in an EV charger?

It bridges reinforced or double insulation, usually across the transformer barrier of an isolated converter, and gives common-mode noise a short path. Y2 parts usually sit line-to-earth in the input EMI filter on basic insulation.

How many Y1 safety capacitors does Walsin offer for chargers in Canada?

We counted 181 X1/Y1 disc part numbers in Walsin’s export, and 125 carry a Y1 rating of 400 Vac or more. Venatech crosses and quotes them from Hong Kong for teams in Canada.

Which Walsin Y1 capacitor crosses a 2,200 pF part on a 600 V supply?

YU1AH222M090 matches at Y1 400 Vac, and YU5AH222M090 adds margin at Y1 500 Vac. YU0AH222M090 is Y1 250 Vac and does not clear 347 V line-to-ground. Confirm against both datasheets and your compliance team.

Can I use a Y2 capacitor in place of a Y1 capacitor?

No, not across reinforced or double insulation. A Y2 part is meant for basic insulation, so it is not a cross for a Y1 position, whatever its capacitance. Check the class first, then the voltage.

Is Venatech an authorised Walsin distributor?

Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong and serves teams in Canada in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!