The EU battery passport applies from 18 February 2027 to EV, light-means-of-transport and industrial batteries above 2 kWh, including storage built in Poland. Its performance data starts in the BMS, and Walsin Technology (Walsin) lists 12,675 automotive precision chip resistors, 2,170 at ±0.1 %. Venatech, the authorised Walsin distributor in Hong Kong, crosses them.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for BMS and hardware engineers, and their buyers, at battery-pack, energy-storage and EV suppliers in Poland. It is perspective, not legal advice: which data your passport must carry, and who files it, is for your compliance team. Our part of the story is smaller and very physical. Much of what a passport says about a battery’s performance and durability is measured by a battery management system, and the accuracy of that measurement rests partly on a handful of precision resistors. On 17 November 2026 we re-measured Walsin’s chip-resistor export (Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, 234,378 part numbers) for the automotive precision parts a BMS front end uses.
When does the EU battery passport apply, and to which batteries?
From 18 February 2027. Batteriepasswerk, updating its guide on 12 October 2026, says the EU battery passport applies from 18 February 2027 to EV batteries, LMT batteries and industrial batteries above 2 kWh, including stationary storage, with a unique QR code per battery, not per model.
The same guide cites the Commission’s data-point list, version 2.0 dated 15 August 2026, with 71 data points, of which it counts 32 as mandatory for industrial batteries on that date, 47 for EV and 50 for LMT batteries. It names chemistry, performance and durability among the examples. It also says Regulation (EU) 2025/1561 moved supply-chain due diligence to 18 August 2027, and that the carbon-footprint delegated act is still pending. Batteriepasswerk is a vendor’s summary and says so; check the Regulation (EU) 2023/1542 text on EUR-Lex, and confirm your own obligations with your compliance team.
Why does the EU battery passport matter to battery makers in Poland?
Because Poland builds batteries at scale. XYZ reported on 15 August 2026 that LG Energy Solution’s plant near Wroclaw has 80 GWh of production capacity, launched Poland’s first energy-storage production line in 2025, and is supplying a 262 MW, roughly 981 MWh storage project for PGE at Zarnowiec due to start operating in September 2027.
XYZ adds that the plant plans a 12 GWh line for 46-series cylindrical cells from the second half of 2028, part-funded by an EU Innovation Fund grant of about 90.8 million euros. Storage systems of that size are industrial batteries well above 2 kWh, so they fall inside the passport’s stated scope. We make no claim about any company’s suppliers, its BMS design or its compliance plans. The point for a Polish engineering team is that the passport turns a battery’s measured data into a regulated record, kept for the life of the unit.
Where do passives enter the battery passport story?
In the measurement chain. A BMS reads each cell or module voltage through resistor dividers and filters; a divider built from two ±0.1 % resistors with TCR of ≤±50 ppm/°C holds its ratio far more tightly across a pack’s temperature swing than one built from ±1 % general-purpose parts.
That matters because the figures a passport reports about performance and durability are, in many packs, derived from what the BMS measured over time. Divider error shows up as cell-voltage error, which feeds the state-of-charge and state-of-health estimates. Two points are often missed. First, ratio accuracy depends on the two legs drifting together, so both legs should come from the same series and TCR class. Second, an industrial storage system spends years at elevated temperature, so the TCR grade matters as much as the initial tolerance. Our note on precision resistor divider ratio accuracy and our guide to what resistor TCR actually buys you go deeper.
How many Walsin automotive precision resistors are there, and at what tolerance?
12,675 part numbers. We parsed all 234,378 rows of Walsin’s chip-resistor export and counted 12,675 distinct automotive high-precision thick-film parts: 8,680 in the TC50 automotive series, all at ≤±50 ppm/°C, and 3,995 in the TC100 automotive series, all at ±0.5 %, across 802 resistance values.
| Walsin series, from the export | Sizes | Tolerances | TCR | Datasheet named in the export | Part numbers |
|---|---|---|---|---|---|
| High Precision Thick Film TC50 (Automotive) | 0402, 0603, 0805, 1206 | ±0.1, ±0.25, ±0.5, ±1 % (2,170 each) | ≤±50 ppm/°C | ASC_WFxxK_J_AUTO.pdf | 8,680 |
| High Precision Thick Film TC100 (Automotive) | 0402, 0603, 0805, 1206, 1210 | ±0.5 % | ≤±100 (2,850), ≤±200 (570), −200 to +400 (575) | ASC_MFxxH.pdf | 3,995 |
| Total | 12,675 |
All 2,170 parts at ±0.1 % sit in the TC50 automotive series: 457 in 0402 and 571 in each of 0603, 0805 and 1206. We have not seen this cut counted anywhere else. Note that the TC100 series widens its TCR at the low and high ends of its range, so check the band for your exact value in ASC_MFxxH.pdf before treating it as a 100 ppm part. Our comparison of high-precision thick film against thin film covers when to step up to thin film, and the chip resistor range lists every Walsin family.
Which Walsin precision resistors are on the shelf in Hong Kong, and what are their automotive twins?
Five, and each has a twin. We checked our ready-stock snapshot dated 9 November 2026: five Walsin high-precision TC100 lines are on our shelf in Hong Kong, none of them in an automotive series, and for each we found an automotive TC50 part with the same size, value and tolerance and a tighter TCR.
| On our shelf in Hong Kong (snapshot 9 Nov 2026) | Size, value, tolerance, TCR | Automotive cross | Its TCR and power | Match / mismatch for a BMS cell-voltage divider | Your incumbent |
|---|---|---|---|---|---|
WF04H1202DTL |
0402, 12 kΩ, ±0.5 %, ≤±100 | WF04K1202DTLJ |
≤±50, 1/16 W | Match on size and value; cross tightens TCR | |
WF04H3302DTL |
0402, 33 kΩ, ±0.5 %, ≤±100 | MF04H3302DTL |
≤±100, 1/10 W | Match on TCR; mismatch on power, higher rating | |
WF08H8203BTL |
0805, 820 kΩ, ±0.1 %, ≤±100 | WF08K8203BTLJ |
≤±50, 1/8 W | Match for a high-side divider leg; cross tightens TCR | |
WF12H1202BTL |
1206, 12 kΩ, ±0.1 %, ≤±100 | WF12K1202BTLJ |
≤±50, 1/4 W | Match for a low-side leg; cross tightens TCR | |
WF12H5762BTL |
1206, 57.6 kΩ, ±0.1 %, ≤±100 | WF12K5762BTLJ |
≤±50, 1/4 W | Match on size and value; cross tightens TCR |
The shelf lines are a dated snapshot, not a promise of quantity or date code. The automotive parts are to order: request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote. Put your incumbent in the last column, confirm against both datasheets, and qualify in your own circuit across your pack’s temperature range.
How Venatech helps
How Venatech helps is a checked cross for the BMS front end. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so a list of incumbent divider and sense resistors returns Walsin candidates with tolerance, TCR and power differences stated.
Paste your resistor part numbers into the cross-reference tool, or upload the BMS BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists the resistors and capacitors on our shelf in Hong Kong. We are Hong Kong-based and supply Wroclaw, Gliwice and the rest of Poland in small lots. Walsin is our authorised line; Stackpole and Viking are lines we supply. For anything about passport scope or data duties, confirm with your compliance team.
The short version
The EU battery passport applies from 18 February 2027 to EV, LMT and industrial batteries above 2 kWh, Batteriepasswerk reports, and Poland’s battery plants, including LG Energy Solution’s 80 GWh site near Wroclaw, build exactly those. Passport performance data often starts as BMS measurements. Walsin lists 12,675 automotive precision chip resistors, 2,170 of them at ±0.1 % and ≤±50 ppm/°C, and every precision line on our Hong Kong shelf has an automotive twin.
Send us the divider and sense resistors from your BMS, and we will return Walsin crosses with tolerance and TCR stated. Which resistor in your cell-voltage path has never been checked for TCR matching?
Related reading
- Precision resistor divider ratio accuracy
- What resistor TCR actually buys you
- High-precision thick film against thin film
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 17 November 2026
Sources
Fetched 17 November 2026.
- Batteriepasswerk, “Battery Passport Obligation from 2027: When, For Whom, Deadlines”, updated 12 October 2026: https://www.batteriepasswerk.com/en/knowledge/battery-passport-2027
- XYZ, Poland Unpacked, “LG Energy Solution invests in next-generation cells”, 15 August 2026: https://xyz.pl/poland-unpacked/lg-energy-solution-invests-in-next-generation-cells-3107/
- Regulation (EU) 2023/1542 on batteries, EUR-Lex: https://eur-lex.europa.eu/eli/reg/2023/1542/oj/eng
- Walsin chip-resistor export, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, re-measured 17 November 2026; datasheets ASC_WFxxK_J_AUTO.pdf and ASC_MFxxH.pdf as named in the export; Venatech ready-stock snapshot dated 9 November 2026.
Frequently asked questions
When does the EU battery passport start?
Batteriepasswerk says it applies from 18 February 2027. Check the Regulation (EU) 2023/1542 text on EUR-Lex and confirm your obligations with your compliance team.
Does the EU battery passport apply to energy-storage systems built in Poland?
The passport covers industrial batteries above 2 kWh, including stationary storage, as well as EV and LMT batteries. Whether a given product is in scope is a question for your compliance team.
Does the battery passport apply to resistors or capacitors?
No passport is needed for a passive component; the duty sits with the battery. Passives matter because the BMS that measures the battery uses them, so keep their part numbers and date codes on file.
What tolerance and TCR should a BMS voltage-divider resistor have?
Many designs use ±0.1 % parts at ≤±50 ppm/°C, with both divider legs from the same series. Walsin lists 2,170 automotive parts at ±0.1 %, all at ≤±50 ppm/°C.
How many Walsin automotive precision resistors are there?
We counted 12,675: 8,680 in the TC50 automotive series and 3,995 in the TC100 automotive series, from 0402 to 1210.
Is Venatech an authorised Walsin distributor for buyers in Poland?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Poland in small lots. Stackpole and Viking are lines we supply, not authorised lines.