For a 0201 MLCC on drone camera electronics in Israel, Walsin Technology (Walsin) lists 2,544 capacitors in the 0201 case, 21 of them at 100 nF, and 100 of those 0201 lines are on our shelf in Hong Kong (snapshot 9 Nov 2026). Venatech Limited, an authorised Walsin distributor in Hong Kong, crosses and quotes them.
Venatech wrote this for layout, hardware and buying engineers in Israel who design stabilised camera payloads, small drones and other boards where every square millimetre and every gram counts. We parsed Walsin’s MLCC exports (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_07.xlsx, 23,360 distinct part numbers), read the 0201 rows against Walsin’s WTC_MLCC_General_Purpose.pdf and WTC_MLCC_Microwave_RF.pdf datasheets, and matched them to our Hong Kong stock snapshot dated 9 November 2026. The news figures name their source and date.
What did NextVision report for the third quarter of 2026?
Record results. NextVision, the Ra’anana-based maker of stabilised cameras, reported on 9 November 2026 third-quarter revenue of 106.4 million US dollars, up 125 percent from 47.3 million US dollars a year earlier, with an order backlog of 209.3 million US dollars.
The same release puts nine-month revenue at 261.9 million US dollars, up 117 percent, with European revenue up 138 percent over nine months and more than 300 customers worldwide. It also says the company is setting up a production line in Europe through a European subsidiary and plans to expand production to the United States. We add no forecast and say nothing about the company’s suppliers or bill of materials. For a hardware engineer in Israel, the signal is that small stabilised-camera and payload electronics is a fast-growing business, and those boards are some of the densest in the industry.
Why do stabilised drone cameras push capacitors into 0201?
Because the board must be small, light and close to the sensor. A 0201 MLCC occupies about 0.6 by 0.3 mm, roughly a third of the footprint of an 0402, which lets a designer put decoupling right at the pins of an image processor, sensor or motor driver in a gimbal head.
A stabilised payload packs an image sensor, a video processor, inertial sensors, gimbal motor drivers and a data link into a housing measured in centimetres and grams. Each IC wants local decoupling, and shorter loops cut inductance at high frequency. The trade-offs are real: 0201 parts carry less capacitance per value, suffer more DC-bias loss, and need tighter placement and inspection on the SMT line. Our 0201 MLCC cross-reference shows how other makers spell the same case, and the MLCC range lists every series.
How many 0201 MLCC does Walsin list, and in which dielectrics?
Two thousand five hundred and forty-four. We counted 2,544 distinct 0201 part numbers in Walsin’s MLCC export: 2,039 C0G/NP0, 296 X7R, 178 X5R, 29 X6S and 2 X7S, spread over six series from general purpose to microwave.
| Series group | 0201 parts | Where it fits on a payload board |
|---|---|---|
| General purpose | 1,118 | Decoupling and filtering on processor, sensor and driver rails |
| Microwave (RF series) | 763 | Matching and coupling on the video and control link |
| High Q and low ESR (HH series) | 217 | Low-loss RF tuning |
| Ultra microwave (UF series) | 206 | Higher-frequency RF stages |
| Automotive, AEC-Q200 (MT series) | 204 | Where a programme asks for AEC-Q200 documentation |
| Automotive without AEC-Q200 (MG series) | 36 | Automotive-grade parts without the certification |
| Total | 2,544 |
We found 21 of the 2,544 at 100 nF and 8 at 1 uF. We also checked our Hong Kong snapshot dated 9 November 2026 and found 100 Walsin 0201 MLCC lines on the shelf, 3 of them at 100 nF.
Which Walsin 0201 MLCC fits a 100 nF, 10 V, 105 °C brief?
Four parts meet it. For a brief of 100 nF, 0201, ±10 percent, at least 10 V and rated to at least +105 °C, 0201S104K100, 0201S104K160 and 0201S104K250 match in X6S, and 0201A104K100 matches in X7S with a +125 °C rating.
Put your incumbent part in the last column and compare each field.
| Walsin part | Dielectric | Tolerance | Rated voltage | Upper temperature | Match / mismatch with 100 nF, 10 V or more, 105 °C or more | Your incumbent |
|---|---|---|---|---|---|---|
0201S104K100 |
X6S | ±10% | 10 V | +105 °C | Match | |
0201S104K160 |
X6S | ±10% | 16 V | +105 °C | Match, 6 V more headroom | |
0201S104K250 |
X6S | ±10% | 25 V | +105 °C | Match, 15 V more headroom | |
0201A104K100 |
X7S | ±10% | 10 V | +125 °C | Match, widest temperature range | |
0201X104K160 |
X5R | ±10% | 16 V | +85 °C | Mismatch: temperature; fits an 85 °C brief, on our shelf | |
0201X104K6R3 |
X5R | ±10% | 6.3 V | +85 °C | Mismatch: voltage and temperature, on our shelf |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
The X6S and X7S parts trade a little capacitance stability for the higher temperature limit. Confirm the part in your own circuit and against the datasheet before release.
Is an X5R 0201 capacitor good enough for a payload board?
Only where the board stays below 85 °C. X5R is specified from -55 to +85 °C with ±15 percent capacitance change, X6S to +105 °C with ±22 percent, and X7S to +125 °C with ±22 percent, so the dielectric choice follows the hottest point the capacitor will see.
A gimbal head in direct sun, sealed against dust and running a video processor, can climb well above ambient. If your thermal model shows the capacitor near or above 85 °C, X6S or X7S is the safer brief. DC bias adds to the loss: a 100 nF 0201 part at a large share of its rated voltage keeps much less than its nominal value, which is one reason to pick a 16 V or 25 V part for a 5 V rail. Our guides to MLCC dielectrics and DC bias derating set out the method.
Check the datasheet. DC-bias curves, thickness and the X6S and X7S temperature characteristics are on Walsin’s WTC_MLCC_General_Purpose.pdf datasheet, not in the export, so take them from there before release.
Which 0201 MLCC can Venatech ship to Israel from Hong Kong?
One hundred lines are on the shelf. We matched 100 Walsin 0201 MLCC lines on our shelf in Hong Kong (snapshot 9 Nov 2026), including 0201X104K160 and 0201X104K250 at 100 nF, 0201X105K6R3 at 1 uF and C0G parts such as 0201N101J500; the other 0201 parts can be quoted through our authorised Walsin channel.
Each quote states availability, date code and lead time, and we work in small lots for engineering builds and pilot runs. We make no stock, price or lead-time promise, and a snapshot line is not a reservation. The ready-stock list shows the dated snapshot.
How Venatech helps
Send us the 0201 and 0402 lines from your payload BOM. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, stating every field where the Walsin part differs from yours.
Paste a part into the cross-reference tool, upload the whole BOM, and request a quote through the site. The ready-stock snapshot is dated 9 November 2026. We serve Israel from Hong Kong with fast quotes and small lots. Walsin is the line we are authorised for.
The short version
NextVision reported third-quarter revenue of 106.4 million US dollars on 9 November 2026, up 125 percent, with a backlog of 209.3 million US dollars and a European production line in preparation. Stabilised payload boards are dense, and that pushes decoupling into 0201. Walsin covers the case with 2,544 0201 MLCC, 0201S104K160 meets a 100 nF, 105 °C brief in X6S, and 100 Walsin 0201 lines sit on our Hong Kong shelf.
Send us your 0201 lines and we will return Walsin crosses with every difference stated. What is the hottest point a capacitor sees on your gimbal board?
Related reading
- 0201 MLCC cross-reference: five spellings, four families
- NP0 vs X7R vs X5R MLCC dielectric
- MLCC DC bias and voltage derating
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 19 November 2026.
Sources
Fetched 19 November 2026.
- NextVision, “NextVision Announces Record Third Quarter 2026 Results”, 9 November 2026: https://www.webull.com/news/15893231129314304
- Walsin MLCC exports, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_07.xlsx, re-measured 19 November 2026; Walsin WTC_MLCC_General_Purpose.pdf and WTC_MLCC_Microwave_RF.pdf datasheets; Venatech Hong Kong stock snapshot dated 9 November 2026.
Frequently asked questions
What did NextVision report for the third quarter of 2026?
On 9 November 2026 NextVision reported third-quarter revenue of 106.4 million US dollars, up 125 percent year on year, and an order backlog of 209.3 million US dollars. It is setting up a production line in Europe.
What is a 0201 MLCC?
It is a multilayer ceramic capacitor in the 0201 case, about 0.6 by 0.3 mm. It saves board area and cuts loop inductance next to a chip, at the cost of lower capacitance per part and more DC-bias loss.
How many 0201 MLCC does Walsin list?
We counted 2,544 Walsin 0201 part numbers: 2,039 C0G/NP0, 296 X7R, 178 X5R, 29 X6S and 2 X7S. 21 are 100 nF.
Which Walsin 0201 capacitor crosses a 100 nF 16 V part rated to 105 °C?
0201S104K160 matches in X6S at 16 V. For 125 °C, 0201A104K100 is an X7S part at 10 V.
What is the difference between X5R and X6S?
X5R is specified to +85 °C with ±15 percent capacitance change; X6S extends to +105 °C with ±22 percent. Pick by the hottest point on the board.
Can Venatech ship 0201 MLCC to Israel from Hong Kong?
Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong. 100 Walsin 0201 lines are on our shelf in the 9 November 2026 snapshot, and the rest can be quoted through our authorised Walsin channel.