For a 0402 chip resistor on EMS lines in Poland, Walsin Technology (Walsin) lists 27,938 parts in the 0402 case, and 85 Walsin 0402 resistor lines are on our shelf in Hong Kong (snapshot 9 Nov 2026), from a 0 ohm jumper to 3.3 megohm. Venatech Limited, an authorised Walsin distributor in Hong Kong, crosses and quotes them.
Venatech wrote this for buyers and NPI engineers at EMS and ODM plants in Poland who keep SMT lines fed with the passives that fill every board. We parsed Walsin’s chip resistor exports (Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, 234,378 distinct part numbers), read the general-purpose rows against Walsin’s ASC_WR.pdf datasheet, and matched every line on our Hong Kong stock snapshot dated 9 November 2026. The news figures name their source and date.
What is Fideltronik building in Poland?
A new production hall with room for six more SMT lines. Evertiq reported on 6 November 2026 that Fideltronik has started building a 7,500 square metre hall at its headquarters in Sucha Beskidzka, with space for six additional SMT lines and handover scheduled for mid-2028.
The same report says Fideltronik’s revenue grew 12 percent year on year in the third quarter of 2026, that the company did not disclose the size of the investment, and that the planned combination with Norautron would create a group with about 750 million euros in revenue and around 3,500 employees, pending regulatory approval. We add no forecast and say nothing about the company’s suppliers. For a buyer in Poland, the signal is that EMS capacity in the country keeps growing, and six SMT lines consume a great many small passives.
Why do EMS lines in Poland run through so many 0402 chip resistors?
Because 0402 is the default size on most dense boards. A 0402 chip resistor measures about 1.0 by 0.5 mm and is typically rated 1/16 W; on a modern control, telecom or industrial board, pull-ups, series terminations, dividers and bias resistors in 0402 often outnumber every other part type.
For an EMS buyer that creates two kinds of work. The first is breadth: one customer BOM can call for dozens of 0402 values at ±1 and ±5 percent, each its own line on the kit list. The second is substitution: when a customer’s approved part is not to hand, the line needs a cross that matches value, tolerance, TCR and power before the build can start. Our article on crossing straight into Hong Kong ready stock shows how VenaMatch handles that, and the chip resistor range lists every series.
How many 0402 chip resistors does Walsin list?
Twenty-seven thousand nine hundred and thirty-eight. We counted 27,938 distinct 0402 part numbers in Walsin’s chip resistor export, across nine series groups; 9,551 are general-purpose thick film and 9,137 are high-precision thick film.
| Series group (0402) | Parts | Typical EMS use |
|---|---|---|
| Thick film general purpose | 9,551 | Pull-ups, dividers, terminations |
| High-precision thick film | 9,137 | Tighter tolerance and TCR |
| Thick film high power | 3,431 | More power in the same footprint |
| Thick film resistor array | 2,617 | Bus pull-ups, saving placements |
| Resistor array, anti-sulfuration | 1,386 | Sulfur-bearing environments |
| Low-ohm current sense, thick film | 970 | Current sensing on small rails |
| Anti-surge | 830 | Pulse and surge exposure |
| High-ohm (above 10 megohm) | 11 | High-impedance bias |
| Metal low-ohm current sense | 5 | Low-value sensing |
| Total | 27,938 |
The WR04X general-purpose family alone accounts for 3,705 of the 27,938 parts.
Which 0402 resistor values are on Venatech’s Hong Kong shelf?
Eighty-five lines. We matched 85 Walsin 0402 chip resistor lines on our shelf in Hong Kong (snapshot 9 Nov 2026): 53 at ±1 percent, 29 at ±5 percent, two high-precision parts at ±0.5 percent and one 0 ohm jumper.
Here is a common 0402 value pack against the shelf. Put your customer’s approved part in the last column.
| Walsin part | Value | Tolerance | TCR (ppm/°C) | Rated power | Match / mismatch with 0402, ±1%, 1/16 W brief | On our shelf (snapshot 9 Nov 2026) | Customer part |
|---|---|---|---|---|---|---|---|
WR04X10R0FTL |
10 ohm | ±1% | -200 to +400 | 1/16 W | Match; check the wider TCR | Yes | |
WR04X22R0FTL |
22 ohm | ±1% | ±100 | 1/16 W | Match | Yes | |
WR04X1000FTL |
100 ohm | ±1% | ±100 | 1/16 W | Match | Yes | |
WR04X1001FTL |
1 kilohm | ±1% | ±100 | 1/16 W | Match | Yes | |
WR04X4701FTL |
4.7 kilohm | ±1% | ±100 | 1/16 W | Match | Yes | |
WR04X1002FTL |
10 kilohm | ±1% | ±100 | 1/16 W | Match | Yes | |
WR04X1003FTL |
100 kilohm | ±1% | ±100 | 1/16 W | Match | Yes | |
WR04X1004FTL |
1 megohm | ±1% | ±100 | 1/16 W | Match | Yes | |
WR04X33R2FTL |
33.2 ohm | ±1% | ±100 | 1/16 W | Mismatch for a 33 ohm line; WR04X33R0FTL is the 33 ohm part, quoted to order |
Yes | |
WR04X49R9FTL |
49.9 ohm | ±1% | ±100 | 1/16 W | Match for a 49.9 ohm line, quoted to order | No |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
The snapshot also holds 159 Walsin 0402 MLCC lines, so the same kit can often draw its decoupling from Hong Kong as well.
What should an EMS buyer check before swapping an 0402 resistor?
Five fields, in this order. Check value, tolerance, TCR, rated power and termination finish; for an automotive or harsh-environment customer, also check whether the approved part is AEC-Q200 or anti-sulfur, because a general-purpose 0402 part may not carry that documentation.
The value and tolerance are in the part code. TCR is the field most often missed: WR04X10R0FTL on our shelf is specified at -200 to +400 ppm/°C, wider than the ±100 of the higher values, which matters in a divider but rarely in a pull-up. Power is usually 1/16 W in 0402, but some high-power families carry more in the same footprint. Finally, any substitution on a customer build needs the customer’s approval; VenaMatch shows each difference so the request can go back with the evidence attached. Our overview of what the Walsin ready stock covers sets out how we keep the shelf list.
Check the datasheet. Power derating, the TCR by value range and termination details for the WR series are on Walsin’s ASC_WR.pdf datasheet, not in the export, so take them from there before release.
How does Venatech support EMS lines in Poland?
Through shelf lines, crosses and quotes from Hong Kong. Venatech holds 85 Walsin 0402 resistor lines and 159 Walsin 0402 MLCC lines on our shelf in Hong Kong (snapshot 9 Nov 2026), and quotes the rest of Walsin’s 27,938 0402 resistors through our authorised Walsin channel.
Each quote states availability, date code and lead time, and we work in small lots for NPI kits and short runs. We make no stock, price or lead-time promise, and a snapshot line is not a reservation. Through our supplier network in Hong Kong we also source parts from other passive-component brands on request; Walsin is the line we are authorised for.
How Venatech helps
Send us the whole kit list. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, stating every field where the Walsin part differs from yours.
Paste a part into the cross-reference tool, upload the BOM, and request a quote through the site. The ready-stock snapshot is dated 9 November 2026. We serve EMS plants in Poland from Hong Kong with fast quotes and small lots.
The short version
Evertiq reported on 6 November 2026 that Fideltronik is building a 7,500 square metre hall in Sucha Beskidzka with room for six more SMT lines, due for handover in mid-2028. Lines like those consume 0402 chip resistors by the reel. Walsin covers the case with 27,938 0402 parts, and 85 Walsin 0402 resistor lines, including WR04X1002FTL at 10 kilohm, sit on our Hong Kong shelf.
Send us your kit list and we will mark every line we hold on the shelf and every line we can cross. Which 0402 value does your line run out of first?
Related reading
- Cross straight into Hong Kong ready stock
- Walsin ready stock: what the part numbers cover
- The ready-stock MLCC shelf by case size and series
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 19 November 2026.
Sources
Fetched 19 November 2026.
- Evertiq, “Fideltronik starts construction of new production hall”, 6 November 2026: https://evertiq.com/news/2026-11-06-fideltronik-starts-construction-of-new-production-hall
- Walsin chip resistor exports, Venatech_ChipR_Upload_01.xlsx to Venatech_ChipR_Upload_79.xlsx, and MLCC exports, re-measured 19 November 2026; Walsin ASC_WR.pdf datasheet; Venatech Hong Kong stock snapshot dated 9 November 2026.
Frequently asked questions
What is Fideltronik building in Poland?
Evertiq reported on 6 November 2026 that Fideltronik has started a 7,500 square metre hall in Sucha Beskidzka with space for six more SMT lines, due for handover in mid-2028.
What is a 0402 chip resistor?
It is a surface-mount resistor about 1.0 by 0.5 mm, typically rated 1/16 W. It is the default size for pull-ups, dividers and terminations on dense boards.
How many 0402 chip resistors does Walsin list?
We counted 27,938 Walsin 0402 part numbers across nine series groups, including 9,551 general-purpose and 9,137 high-precision thick film parts.
Which Walsin 0402 resistors are in stock in Hong Kong?
85 Walsin 0402 resistor lines are on our shelf in the 9 November 2026 snapshot, including WR04X1002FTL at 10 kilohm and WR04X1001FTL at 1 kilohm, both ±1 percent.
What should I check before substituting an 0402 resistor on a customer build?
Value, tolerance, TCR, rated power and termination, plus AEC-Q200 or anti-sulfur status where the customer requires it. Any substitution needs the customer’s approval.
Can Venatech supply EMS plants in Poland from Hong Kong?
Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong. We quote shelf lines and the rest of the Walsin range through our authorised channel, with availability, date code and lead time stated on each quote.