NEWS

0603 100nF Capacitor for Electronics Exporters in Turkey: Technology-Intensive Exports Reach 86.4 Billion US Dollars and Walsin Lists 49 Parts

For a 0603 100nF capacitor on export-grade electronics built in Turkey, Walsin Technology (Walsin) lists 49 parts across six series, and 7 of them are on our shelf in Hong Kong (snapshot 9 Nov 2026). Venatech Limited, an authorised Walsin distributor in Hong Kong, crosses your current part and quotes it.


Venatech wrote this for hardware and buying engineers in Turkey who build televisions, appliance controls, telecom, defence and industrial electronics for export. We parsed Walsin’s MLCC exports (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_07.xlsx, 23,360 distinct part numbers), read the 0603 100 nF rows against Walsin’s WTC_MLCC_General_Purpose.pdf, WTC_MLCC_Automotive_MT.pdf and WTC_MLCC_Soft_term_SH.pdf datasheets, and matched them to our Hong Kong stock snapshot dated 9 November 2026. The news figures name their source and date.

How much did Turkey export in technology-intensive goods in 2026?

86.4 billion US dollars in nine months. Türkiye Today reported on 2 November 2026, citing TurkStat data compiled by Anadolu Agency, that Turkey’s medium-high and high-technology exports reached 86.4 billion US dollars in January to September 2026, up 7 percent year on year.

The same report puts high-tech exports alone at 7.4 billion US dollars, up 6.3 percent from 6.9 billion US dollars, with computers, electronic and optical products accounting for 3 billion US dollars of that high-tech total. We add no forecast and say nothing about any company’s suppliers. For an engineer in Turkey, the signal is that electronics leaving the country keeps growing in value, and every one of those boards carries a large count of small decoupling capacitors that must meet the customer’s specification in the destination market.

Where does a 0603 100nF capacitor sit on an export-grade board?

Next to almost every IC. A 0603 100nF capacitor is the standard local decoupling part for microcontrollers, logic, sensors and drivers: it measures about 1.6 by 0.8 mm and supplies the fast current an IC draws on each switching edge, and a single appliance or TV control board can carry dozens.

On a television main board or an appliance controller you find 100 nF parts at each supply pin, on reset and sensor lines, on regulator inputs and outputs, and across motor-driver and relay-driver rails. Many designers keep 0603 rather than 0402 on mains-powered boards because it is easier to place, inspect and rework, and leaves room for a higher voltage rating. Our guide to MLCC dielectrics explains why X7R is the usual choice, and the MLCC range lists every series.

How many 0603 100nF capacitors does Walsin list?

Forty-nine. We counted 49 distinct Walsin part numbers at 100 nF in the 0603 case: 47 are X7R and 2 are X5R, across general-purpose, AEC-Q200 automotive, automotive non-AEC and soft-termination series, rated from 10 V to 100 V.

Walsin series (0603, 100 nF) Parts On our shelf (snapshot 9 Nov 2026) When to use it
General purpose 17 6 Consumer, appliance and industrial boards
AEC-Q200 automotive (MT series) 11 0 Automotive or where AEC-Q200 is specified
Automotive without AEC-Q200 (MG series) 7 0 Automotive-grade without the certificate
Soft termination, Ag-poly (SH series) 7 1 Boards that flex or see thermal shock
Automotive soft termination (ST series) 6 0 AEC-Q200 plus flex-crack protection
Soft termination, Cu-poly (SG series) 1 0 Flex-crack protection, copper-polymer
Total 49 7

Across all series, the 0603 case holds 4,715 Walsin MLCC part numbers, 1,288 of them X7R.

Which Walsin 0603 100nF capacitor fits a 50 V, X7R, ±10% brief?

Three shelf lines and one AEC-Q200 part meet it. For a brief of 100 nF, 0603, X7R, ±10 percent, at least 50 V, 0603B104K500 and 0603B104K101 match from our shelf, SH18B104K500 matches from our shelf with soft termination, and MT18B104K500 matches as an AEC-Q200 part to order.

Put your incumbent part in the last column and compare each field.

Walsin part Series Dielectric Tolerance Rated voltage Match / mismatch with 100 nF, X7R, ±10%, 50 V or more On our shelf (snapshot 9 Nov 2026) Your incumbent
0603B104K500 General purpose X7R ±10% 50 V Match Yes
0603B104K101 General purpose X7R ±10% 100 V Match, 50 V more headroom Yes
SH18B104K500 Soft termination X7R ±10% 50 V Match, flex-crack protection Yes
MT18B104K500 AEC-Q200 automotive X7R ±10% 50 V Match, AEC-Q200 No, quoted to order
0603B104M500 General purpose X7R ±20% 50 V Mismatch: tolerance ±20% Yes
0603B104K250 General purpose X7R ±10% 25 V Mismatch: voltage below 50 V Yes
0603X104K250 General purpose X5R ±10% 25 V Mismatch: dielectric and voltage No

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

Confirm the part in your own circuit and against the datasheet, and check thickness if your stencil or pick-and-place programme is tight.

Why choose a 50 V part for a 12 V or 24 V rail?

To keep capacitance under DC bias and add surge margin. An X7R MLCC loses capacitance as DC voltage rises, so a 100 nF part rated 50 V on a 12 V rail keeps more of its value than a 16 V part at the same bias, and it tolerates the spikes that relay, motor and inductive loads put on appliance rails.

The exact loss depends on case size and dielectric design, which is why the curve on the datasheet matters more than the voltage code. Boards near relays, compressors or motor drivers also see switching transients, and a higher rating gives headroom. Where the board flexes, for example a long appliance control strip or a board screwed down at the corners, a soft-termination part such as SH18B104K500 reduces the risk of flex cracks. Our note on MLCC DC bias and voltage derating covers the method.

Check the datasheet. DC-bias curves and thickness by voltage for the general-purpose and SH series are on Walsin’s WTC_MLCC_General_Purpose.pdf and WTC_MLCC_Soft_term_SH.pdf datasheets, not in the export, so take them from there before release.

Which 0603 100nF lines can Venatech ship to Turkey from Hong Kong?

Seven. We matched 7 of Walsin’s 49 0603 100 nF part numbers on our shelf in Hong Kong (snapshot 9 Nov 2026): 0603B104K100, 0603B104K160, 0603B104K250, 0603B104K500, 0603B104K101, 0603B104M500 and SH18B104K500; the other 42 can be quoted through our authorised Walsin channel.

Each quote states availability, date code and lead time, and we work in small lots for pilot runs and engineering builds. We make no stock, price or lead-time promise, and a snapshot line is not a reservation. The same snapshot holds 148 Walsin 0603 MLCC lines in all; see the ready-stock list.

How Venatech helps

Send us the capacitor lines from your BOM. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, stating every field where the Walsin part differs from yours.

Paste a part into the cross-reference tool, upload the whole BOM, and request a quote through the site. The ready-stock snapshot is dated 9 November 2026. We serve Turkey from Hong Kong with fast quotes and small lots. Walsin is the line we are authorised for.

The short version

Turkey’s technology-intensive exports reached 86.4 billion US dollars in January to September 2026, up 7 percent, with computers, electronic and optical products at 3 billion US dollars, Türkiye Today reported on 2 November 2026. Every exported board needs decoupling. Walsin covers the 0603 100 nF slot with 49 parts, and 0603B104K500 meets a 50 V, X7R, ±10 percent brief straight from our Hong Kong shelf.

Send us your 100 nF lines and we will mark what we hold and what we can cross. Which rail on your board needs the most voltage headroom?

Related reading

Last reviewed: 19 November 2026.

Sources

Fetched 19 November 2026.

  • Türkiye Today, “Türkiye’s technology-intensive exports surge to 86.4B in 9 months”, 2 November 2026: https://www.turkiyetoday.com/business/turkiyes-technology-intensive-exports-surge-to-864b-in-9-months-3231498
  • Walsin MLCC exports, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_07.xlsx, re-measured 19 November 2026; Walsin WTC_MLCC_General_Purpose.pdf, WTC_MLCC_Automotive_MT.pdf and WTC_MLCC_Soft_term_SH.pdf datasheets; Venatech Hong Kong stock snapshot dated 9 November 2026.

Frequently asked questions

How much did Turkey export in technology-intensive goods in 2026?

Türkiye Today reported on 2 November 2026 that medium-high and high-technology exports reached 86.4 billion US dollars in January to September 2026, up 7 percent. High-tech exports were 7.4 billion US dollars.

What is a 0603 100nF capacitor used for?

It is the standard local decoupling capacitor for ICs on mains-powered and industrial boards. It supplies fast current on switching edges and filters noise on supply pins.

How many 0603 100nF capacitors does Walsin list?

We counted 49 Walsin part numbers at 100 nF in 0603, 47 X7R and 2 X5R, rated from 10 V to 100 V across six series.

Which Walsin part crosses a 100nF 50V X7R 0603 capacitor?

0603B104K500 matches and is on our Hong Kong shelf. MT18B104K500 is the AEC-Q200 alternative and SH18B104K500 adds soft termination.

Should I use a 50 V capacitor on a 12 V rail?

Often yes. X7R capacitance falls under DC bias, and a 50 V part keeps more of its value at 12 V and adds margin for switching transients.

Can Venatech ship Walsin 0603 MLCC to Turkey from Hong Kong?

Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong. Seven 0603 100 nF lines are on our shelf in the 9 November 2026 snapshot, and the rest are quoted through our authorised Walsin channel.


Share This, Choose Your Platform!