To keep counterfeit electronic components off a Polish EMS line, buy from an authorised channel: Venatech, Walsin’s authorised distributor in Hong Kong, holds 774 Walsin Technology (Walsin) MLCC lines on our shelf in Hong Kong (snapshot 9 Nov 2026), part of 1,053 Walsin lines we matched to Walsin’s own exports.
Venatech Limited, an authorised Walsin distributor in Hong Kong, wrote this for a purchasing or quality engineer in Poland who has been offered a “same part, available now” deal from a broker and has to decide whether to take it. We matched every line in our stock snapshot as at 9 November 2026 against Walsin’s MLCC export 00_ALL_MLCC_parts_combined.xlsx and the other Walsin product exports, and counted distinct part numbers. The news fact names its source and date; we fetched it on 16 November 2026.
What warning on counterfeit electronic components came out of Warsaw?
A warning about the grey market. Evertiq reported on 13 November 2026, from an interview at Evertiq Expo 2026 in Warsaw, that a specialist at testing and storage company HTV Alter Technology said AI-driven demand and allocations are making it harder to buy from original sources, and that some manufacturers are turning to brokers and the grey market.
The interviewee put the risk plainly: “Often they get parts that are either not solderable anymore or that are fake.” The report adds that finding those parts late in production adds cost and delay, and that firms should plan purchases well ahead rather than wait for a shortage. It does not name any component maker or product family as short, and neither do we. For a buyer in Poland, where EMS lines run many short jobs for European OEMs, the message is about where a part comes from, not only whether it is available.
Why are counterfeit MLCC so hard to spot?
Because most small MLCC carry no marking at all. An 0402 or 0603 multilayer ceramic capacitor is a plain ceramic block with two terminations and no printed value, maker or date code, so the only identity it has is the reel label and the paper trail behind it; once parts leave that trail, a buyer cannot tell a real part from a relabelled one by eye.
That is why counterfeit electronic components in the passive world are mostly relabelled, remarked or recovered parts rather than clever copies. A reel of an unknown dielectric relabelled as X7R, or a capacitor of the wrong voltage relabelled to the right one, measures close enough on a quick capacitance check to pass incoming inspection. The second risk in the Warsaw warning, solderability, is real too: MLCC terminations age in poor storage. Our note on MLCC shelf life, storage and handling explains what goes wrong and how long a sealed reel lasts.
What should a Polish buyer check on a reel of MLCC?
Five things before the reel reaches the feeder. Check that the label part number decodes to the stated size, dielectric, capacitance and voltage; that the date code is plausible; that the reel and bag match the maker’s packaging; that a sample measures right on capacitance and dissipation factor at the datasheet test condition; and that the paper trail leads back to the manufacturer or an authorised distributor.
Walsin part numbers carry their specification in the code: 0402B104K160 is 0402, X7R, 100 nF, 10 percent, 16 V. If a label code does not decode to the specification on the purchase order, stop. A sample measurement should follow the datasheet test frequency and voltage, because a cheap meter at the wrong frequency can hide a dielectric swap. For high-reliability builds, cross-sectioning a sample shows layer count and electrode metal. None of this replaces a clean source. Our guide to counterfeit passive components and authorised sourcing sets out the full checklist.
How many Walsin MLCC lines are on the Hong Kong shelf?
774 lines. We matched 1,053 lines in our stock snapshot as at 9 November 2026 to Walsin’s own product exports; 774 of them are Walsin MLCC, spread across ten case sizes from 0201 to 2220, with 162 lines in 0402 and 158 in 0805.
| Walsin MLCC on our shelf in Hong Kong (snapshot 9 Nov 2026), by case size | Lines |
|---|---|
| 0201 | 100 |
| 0402 | 162 |
| 0603 | 148 |
| 0805 | 158 |
| 1206 | 106 |
| 1210 | 45 |
| 1808 | 13 |
| 1812 | 38 |
| 2211 and 2220 | 4 |
| Total | 774 |
By dielectric, 381 of the 774 lines are NP0, 329 are X7R and 57 are X5R. Every line is a Walsin catalogue code that decodes in Walsin’s own export, and Walsin is the line we are authorised for. The full MLCC range shows what is available to order beyond the shelf.
Which Walsin 100 nF 0402 parts can a Polish EMS line take from the shelf?
Seven of 52. We counted 52 distinct Walsin part numbers at 100 nF in 0402 across X7R, X5R and X6S; seven are on our shelf in Hong Kong (snapshot 9 Nov 2026), and for a 100 nF, X7R, 0402, 16 V brief three of those match.
| Walsin part | Dielectric | Rated voltage | Tolerance | Match / mismatch with a 100 nF, X7R, 0402, 16 V brief | Your incumbent |
|---|---|---|---|---|---|
0402B104K160 |
X7R | 16 V | 10% | Match, on the shelf | |
0402B104K250 |
X7R | 25 V | 10% | Match, higher voltage, on the shelf | |
0402B104K500 |
X7R | 50 V | 10% | Match, higher voltage, on the shelf | |
0402B104J100 |
X7R | 10 V | 5% | Mismatch: voltage below 16 V | |
0402X104K160 |
X5R | 16 V | 10% | Mismatch: X5R, lower temperature limit | |
0402X104K250 |
X5R | 25 V | 10% | Mismatch: X5R | |
MT15B104K160 |
X7R, MT automotive | 16 V | 10% | Match, to order, qualified to AEC-Q200 |
A higher-voltage X7R part usually holds more capacitance under DC bias, so 0402B104K250 is a sensible choice on a 12 V rail if the height and pad fit. The automotive MT part is to order: request a quote and we source it through our authorised Walsin channel. Confirm against both datasheets and qualify in your own circuit.
How does a buyer in Poland stay out of the grey market?
By planning early and buying where the paper trail is short. Build the forecast, send the BOM early, keep a dated record of every source, and treat any “same part, today” offer without manufacturer traceability as a test sample, not production stock; a cross to a documented alternative is often safer than a mystery reel.
When the original part is hard to get, the choice is not only broker or wait. A cross to a Walsin part with every difference stated keeps the line running with full traceability. Our page on how to check Walsin stock and reserve it explains how to see what we hold and how to ask for it.
How Venatech helps
How Venatech helps a Polish buyer is traceable stock and a cross that shows every difference. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin; through our supplier network we also source other passive brands on request, while Walsin comes through our authorised channel.
Paste a part number into the cross-reference tool, upload a whole BOM, and check the ready-stock snapshot, dated 9 November 2026 and never live-synced. Request a quote through the site; we confirm availability, date code and lead time on each quote and make no stock, price or delivery promise. We serve Polish teams from Hong Kong, in small lots. Stackpole and Viking are lines we supply; Walsin is the line we are authorised for. We give no customs or compliance advice; confirm that with your own team.
The short version
Evertiq reported on 13 November 2026, from Evertiq Expo in Warsaw, that a testing specialist sees manufacturers turning to brokers and receiving parts that are unsolderable or fake. Small MLCC carry no marking, so the reel label and its paper trail are their only identity. We hold 774 Walsin MLCC lines on our shelf in Hong Kong (snapshot 9 Nov 2026), and a 100 nF, X7R, 0402, 16 V brief has three matching shelf lines.
Send us the broker offer you are unsure about, and we will check the part number and return a traceable Walsin cross. Which of your 0402 lines would you least like to see relabelled?
Related reading
- Counterfeit passive components and authorised sourcing
- MLCC shelf life, storage and handling
- How to check Walsin stock and reserve it
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 16 November 2026
Sources
Fetched 16 November 2026.
- Evertiq, interview with HTV Alter Technology on component shortages and the grey market, Evertiq Expo 2026 Warsaw, 13 November 2026: https://evertiq.com/news/2026-11-13-htv-alter-technologys-klaudia-cyzio-on-component-shortages-and-grey-market
- Walsin MLCC export, 00_ALL_MLCC_parts_combined.xlsx, and Walsin product exports, re-measured 16 November 2026; Venatech stock snapshot as at 9 November 2026.
Frequently asked questions
What did the Warsaw expo interview say about counterfeit electronic components?
Evertiq reported on 13 November 2026 that a specialist at HTV Alter Technology said allocations and AI demand are pushing some manufacturers to brokers and the grey market, where parts can arrive unsolderable or fake.
Can you tell a counterfeit MLCC by looking at it?
Usually not. Most 0402 and 0603 MLCC carry no printed marking, so identity rests on the reel label and the paper trail. Measure a sample at the datasheet test condition and check the source.
How many Walsin MLCC does Venatech hold for buyers in Poland?
We hold 774 Walsin MLCC lines on our shelf in Hong Kong (snapshot 9 Nov 2026), across ten case sizes from 0201 to 2220. Venatech quotes them to buyers in Poland in small lots.
Which Walsin part fits a 100 nF X7R 0402 16 V capacitor?
0402B104K160 matches directly, and 0402B104K250 and 0402B104K500 match at higher voltage; all three are on our shelf in Hong Kong (snapshot 9 Nov 2026). Confirm against both datasheets.
Is a broker part always counterfeit?
No, but without manufacturer traceability you cannot prove it is not. Treat it as a sample to test, and prefer an authorised source or a documented cross for production.
Is Venatech an authorised Walsin distributor?
Yes. Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Poland. Other brands are sourced on request through our supplier network; Walsin is the line we are authorised for.