NEWS

Low Profile MLCC for AI Chip Packages in South Korea: a 4.3 Trillion Won Substrate Plant in Sejong and 51 Walsin Capacitors at 0.85 mm or Thinner

For a low profile MLCC on AI package, module or memory boards in South Korea, Walsin Technology (Walsin) lists 56 TT-series capacitors, and 51 of them are 0.85 mm thick or thinner, down to 0.30 mm in 0402. Venatech Limited, an authorised Walsin distributor in Hong Kong, crosses your thin capacitors and quotes them.


This post is for engineers in South Korea who place capacitors where height is the binding constraint: under a heat spreader, on the back of a module, beside a package or on a substrate that has to fit a tight stack-up. We counted every row of Walsin’s MLCC exports (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, 23,360 part numbers) and checked the TT series against Walsin’s own low-profile datasheet, 21_Low_Profile_TT.pdf. The news fact is named with its source and date.

What did Samsung Electro-Mechanics announce in Sejong?

A new substrate plant for high-performance chips. The Kyunghyang Shinmun reported on 12 November 2026 that Samsung Electro-Mechanics will invest 4.3 trillion won at its Sejong site to expand high-performance package substrate production, as the first step of an investment the company is considering at about 8 trillion won.

The report describes a four-storey plant of about 30,000 pyeong, with full-scale mass production targeted for September 2028, and says four regional heads from Chungcheong attended the groundbreaking. We add nothing to that and make no comment on the company’s own capacitor business or its customers. For a design engineer in South Korea, the point is that more substrate capacity is being built at home for the large, power-hungry packages that AI hardware needs, and those packages and the modules around them are where thin capacitors earn their place.

Where does a low profile MLCC sit on an AI package or module?

Wherever a standard part is too tall. A low profile MLCC keeps the footprint of a standard case but cuts the height: Walsin’s TT series holds 0402 at 0.30 mm and 0805 and 1206 at 0.85 mm, against 1.25 mm or more for many standard 0805 and 1206 parts at the same capacitance.

Walsin’s datasheet lists IC packaging and modules among the TT series applications, alongside LCD panels. In practice the parts go on the land side of a package, on the underside of memory and accelerator modules, inside camera and display modules, and anywhere a lid, shield or heat sink sits close above the board. Height is not cosmetic here: it decides whether the capacitor can sit close to the power pins, and loop inductance falls as the capacitor moves closer. Our note on decoupling at the package explains why placement beats raw capacitance, and the MLCC range lists every series.

How many Walsin low profile MLCC are there, and how thin are they?

Fifty-six in the TT series. We counted 56 distinct TT part numbers: 4 in 0402 at 0.30 mm, 2 in 0603 at 0.50 mm, 26 in 0805 at 0.85 mm, 21 in 1206 and 3 in 1210; 51 of the 56 are 0.85 mm or thinner.

Case size Thickness in export Parts Capacitance range Voltage range
0402 (1005) 0.30 ± 0.03 mm 4 220 nF to 1 µF 6.3 V to 25 V
0603 (1608) 0.50 ± 0.10 mm 2 1 µF to 4.7 µF 10 V to 16 V
0805 (2012) 0.85 ± 0.10 mm 26 1 µF to 22 µF 6.3 V to 25 V
1206 (3216) 0.85 mm (17), 1.15 mm (3), not listed (1) 21 1 µF to 47 µF 6.3 V to 50 V
1210 (3225) 0.85 mm (2), 2.50 mm (1) 3 2.2 µF to 10 µF 10 V to 100 V
Total 56

By dielectric, 51 are X5R and 5 are X7R. The X7R parts run from 1 µF to 4.7 µF; the X5R parts reach 47 µF in 1206. We checked every thickness field; where the export leaves one blank, read it from the datasheet before you plan a stack-up.

Which Walsin low profile MLCC fits a 4.7 uF, 10 V, 0.85 mm brief?

Five parts meet it. For a brief of 4.7 µF or more, 10 V or more, 0.85 mm or thinner and 0805 or smaller, TT18X475K100, TT21X475K160, TT21X475M100, TT21X106K100 and TT21X106K160 match.

Put your incumbent thin capacitor in the last column and compare each field.

Walsin part Case Capacitance Rated voltage Thickness Match / mismatch with 4.7 µF, 10 V, 0.85 mm, 0805 or smaller Your incumbent
TT18X475K100 0603 4.7 µF 10 V 0.50 mm Match, thinner and smaller
TT21X475K160 0805 4.7 µF 16 V 0.85 mm Match, voltage headroom
TT21X475M100 0805 4.7 µF 10 V 0.85 mm Match; ±20% tolerance
TT21X106K100 0805 10 µF 10 V 0.85 mm Match, more capacitance
TT21X106K160 0805 10 µF 16 V 0.85 mm Match
TT21X225K250 0805 2.2 µF 25 V 0.85 mm Mismatch: capacitance below 4.7 µF
TT21X106K6R3 0805 10 µF 6.3 V 0.85 mm Mismatch: voltage below 10 V
TT31X106K100 1206 10 µF 10 V 1.15 mm Mismatch: thickness and case
TT15X105K6R3 0402 1 µF 6.3 V 0.30 mm Mismatch on value; fits a land-side 1 µF slot

Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.

All of these are X5R, rated to 85 °C on the datasheet. If the part sits under a lid that runs hotter, a TT X7R part or a standard X7R part may be the safer start even at the cost of height.

What does DC bias do to a thin X5R capacitor?

It takes capacitance away, and thin parts are not exempt. A Class II capacitor loses capacitance as DC voltage rises; a 4.7 µF X5R part run at its full 10 V rating can deliver well under half its nominal value, so a 16 V part such as TT21X475K160 at 5 V keeps more of it.

The exact curve depends on the dielectric thickness inside each part, and a thin body often means thinner layers. That is why voltage headroom is the cheapest way to win back effective capacitance on a 0.85 mm part. Our guide to MLCC DC bias and voltage derating shows how to read the curve.

Check the datasheet. DC bias curves for individual TT part numbers are not in the export. Ask for the curve for your exact code, or measure it on your own fixture, before you commit a decoupling budget.

Can Venatech supply Walsin low profile MLCC from Hong Kong?

Yes, to order. All 56 TT-series capacitors can be quoted from Hong Kong; none is on our shelf in Hong Kong (snapshot 9 Nov 2026), so request a quote and we source them through our authorised Walsin channel.

Each quote states availability, date code and lead time for the line, and we work in small lots for engineering builds and module pilots. We make no stock, price or lead-time promise. The ready-stock list is a dated snapshot of the general-purpose MLCC and chip resistors that often sit on the same board.

How Venatech helps: what should a Korean module team send us?

The thin capacitors from your BOM, with the height limit. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, stating every field where the Walsin part differs from your original.

Paste a capacitor code into the cross-reference tool, or upload the whole BOM and request a quote through the site; add the maximum height so we check thickness as well as value. The ready-stock snapshot is dated 9 November 2026. We serve Sejong, Cheonan, Asan, Suwon and Icheon from Hong Kong, with fast quotes and small lots. Walsin is the line we are authorised for; Stackpole and Viking are lines we supply.

The short version

Samsung Electro-Mechanics will invest 4.3 trillion won in a Sejong package-substrate plant, the Kyunghyang Shinmun reported on 12 November 2026, with mass production targeted for September 2028. AI packages and the modules around them need capacitors that fit under tight height limits. Walsin’s TT series covers that with 56 low profile MLCC, 51 at 0.85 mm or thinner and 4 at 0.30 mm in 0402, and TT21X475K160 meets a 4.7 µF, 10 V, 0.85 mm brief with voltage to spare.

Send us the thin capacitors on your module with the height limit, and we will return Walsin crosses with every difference stated. What is the tallest part your lid allows?

Related reading

Last reviewed: 19 November 2026.

Sources

Fetched 19 November 2026.

  • The Kyunghyang Shinmun, report on Samsung Electro-Mechanics’ Sejong investment, 12 November 2026: https://www.khan.co.kr/en/article/202611121537017
  • Walsin MLCC exports, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 19 November 2026; Walsin low profile datasheet 21_Low_Profile_TT.pdf; Venatech Hong Kong stock snapshot dated 9 November 2026.

Frequently asked questions

What did Samsung Electro-Mechanics announce in Sejong in November 2026?

The Kyunghyang Shinmun reported on 12 November 2026 a 4.3 trillion won investment to expand high-performance package substrate production in Sejong, the first phase of about 8 trillion won under consideration, with mass production targeted for September 2028.

What is a low profile MLCC?

A multilayer ceramic capacitor with a standard footprint but reduced height. Walsin’s TT series holds 0402 at 0.30 mm and 0805 and 1206 at 0.85 mm, for packages, modules and other height-limited boards.

How many Walsin low profile MLCC are available for buyers in South Korea?

We counted 56 TT-series parts; 51 are 0.85 mm or thinner. 51 are X5R and 5 are X7R, from 220 nF to 47 µF and 6.3 V to 100 V.

Which Walsin low profile capacitor crosses a 4.7 µF 10 V 0805 part?

TT21X475K160 and TT21X475M100 match in 0805 at 0.85 mm, and TT18X475K100 matches in 0603 at 0.50 mm. Confirm the DC bias curve on your rail voltage before release.

Is a 0.3 mm 0402 capacitor available from Walsin?

Yes. Four TT parts in 0402 are 0.30 mm thick, from 220 nF to 1 µF, including TT15X105K6R3 at 1 µF and 6.3 V.

Is Venatech an authorised Walsin distributor for buyers in South Korea?

Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in South Korea in small lots. Stackpole and Viking are lines we supply, not authorised lines.


Share This, Choose Your Platform!