For a 100V MLCC on 48 V robot servo drives in China, Walsin Technology (Walsin) lists 245 X7R capacitors at 100 V and 100 nF or more, from 0603 to 2225, and 13 are on our shelf in Hong Kong (snapshot 9 Nov 2026). Venatech Limited, an authorised Walsin distributor in Hong Kong, crosses and quotes them.
This post is for engineers in China who design joint drives, servo amplifiers and motion controllers, and for the buyers who keep those lines supplied. We counted the rows ourselves in Walsin’s MLCC exports (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, 23,360 part numbers), matched them against our Hong Kong stock snapshot dated 9 November 2026, and read the series notes on Walsin’s 01_General_Purpose.pdf, 11_Automotive_MT.pdf and 19_Soft_Term_SH.pdf datasheets. The production figure names its source and date.
How many industrial robots did China make in October 2026?
82,846 sets. China’s National Bureau of Statistics reported on 16 November 2026 that industrial robot output reached 82,846 sets in October, up 26.0 percent year on year, and 874,141 sets from January to October, up 32.3 percent.
The same release puts October growth in high-tech manufacturing at 17.6 percent and industrial value added at 4.8 percent. It also shows output of new energy vehicles at 2.027 million units, up 17.1 percent, while computers and mobile phones fell. We add no forecast and name no robot maker. For a drive engineer the figure means more servo axes: every industrial robot carries several joint motors, and each motor has a drive stage whose DC bus needs ceramic capacitors close to the switches.
Why does a 48 V robot servo drive use a 100V MLCC?
For voltage headroom and capacitance that survives bias. A 48 V bus can ring well above 48 V when a joint brakes or a switch turns off, so many designers use 100 V parts; a 100 V X7R part also keeps more of its capacitance at 48 V than a 50 V or 63 V part does.
On a joint drive the MLCC does three jobs: high-frequency decoupling right at the half-bridge, snubbing switching edges, and filtering the gate-driver and logic rails. Regenerative energy from a decelerating arm pushes the bus up until a brake chopper or the supply absorbs it, and the ceramic parts see that peak. DC bias then pulls capacitance down as voltage rises, which is why voltage headroom is effectively capacitance headroom. Our guide to MLCC DC bias and voltage derating shows how far the curve drops, and the MLCC range lists every series.
How many Walsin 100V X7R MLCC reach 100 nF or more?
Two hundred and forty-five. We counted 245 distinct Walsin X7R capacitors rated 100 V with 100 nF or more; 82 of them reach 1 µF or more, and 39 are in AEC-Q200 qualified series (MT and ST).
| Case size | Parts at 100 V, X7R, 100 nF or more |
|---|---|
| 0603 | 8 |
| 0805 | 23 |
| 1206 | 68 |
| 1210 | 60 |
| 1812 | 47 |
| 1825 | 3 |
| 2220 | 30 |
| 2225 | 6 |
| Total | 245 |
1206 and 1210 together hold 128 of the 245, which suits a compact drive board. Across all values, Walsin lists 849 X7R part numbers at 100 V, so the 100 nF floor is what turns a long catalogue into a short list for bus work.
Which Walsin 100V MLCC fits a 1 uF, 1206 or 1210 servo brief?
Five match, and two are on our shelf. For a brief of 1 µF, 100 V, X7R, in 1206 or 1210, 1206B105K101 and 1210B105K101 match and are on our shelf in Hong Kong (snapshot 9 Nov 2026); MT31B105K101, ST31B105K101 and SH31B105K101 match to order.
Put your incumbent bus capacitor in the last column and compare each field.
| Walsin part | Series | Case | Capacitance | Voltage | Match / mismatch with 1 µF, 100 V, X7R, 1206 or 1210 | Your incumbent |
|---|---|---|---|---|---|---|
1206B105K101 |
General purpose | 1206 | 1 µF ±10% | 100 V | Match; on our shelf | |
1210B105K101 |
General purpose | 1210 | 1 µF ±10% | 100 V | Match; on our shelf | |
MT31B105K101 |
MT, AEC-Q200 | 1206 | 1 µF ±10% | 100 V | Match; automotive qualified | |
ST31B105K101 |
ST, AEC-Q200 soft termination | 1206 | 1 µF ±10% | 100 V | Match; flex-crack resistance | |
SH31B105K101 |
SH soft termination | 1206 | 1 µF ±10% | 100 V | Match; flex-crack resistance | |
1812B105K101 |
General purpose | 1812 | 1 µF ±10% | 100 V | Mismatch: case larger than 1210 | |
1206B104K101 |
General purpose | 1206 | 100 nF ±10% | 100 V | Mismatch on value; on our shelf for edge snubbing | |
0805B474K101 |
General purpose | 0805 | 470 nF ±10% | 100 V | Mismatch on value and case; on our shelf |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
Heights differ between series of the same case size, so check the thickness on each datasheet if the drive sits under a heat sink.
Should a robot joint drive use soft termination or AEC-Q200 parts?
Often yes, for the larger cases. A 1206 or 1210 MLCC on a drive board that flexes or vibrates is at risk of flex cracking; Walsin’s ST, SH and SG soft-termination series and its MT automotive series cover 100 V parts in the same footprints as the general-purpose line.
A robot joint lives with vibration, thermal cycling and, in collaborative arms, a board that may sit in a curved housing. A flex crack in a bus capacitor can short the DC link, so many teams move the larger cases to soft termination even without an automotive requirement. AEC-Q200 qualification is a documentation choice as much as a reliability one: if your customer asks for it, the MT and ST codes come with that paperwork; if not, the general-purpose and SH codes may be enough. Our explainer on flex cracking and board bend sets out the mechanism.
Check the datasheet. Bend test limits and termination structure differ between ST, SH and SG; read them on 12_Soft_Term_Automotive_ST.pdf and 19_Soft_Term_SH.pdf before you swap one series for another.
Which Walsin 100V MLCC are on the shelf in Hong Kong?
Thirteen lines. We checked all 245 parts against our snapshot and 13 are on our shelf in Hong Kong (snapshot 9 Nov 2026), from 100 nF in 0603 to 1 µF in 1210, including 1206B105K101 and 1210B105K101.
The 13 lines are 0603B104K101, 0805B104K101, 0805B224K101, 0805B474K101, 1206B104K101, 1206B105K101, 1206B184K101, 1206B274K101, 1210B105K101, 1210B334K101, 1812B824K101, 2220B474K101 and SH31B154K101. Availability moves daily, so we confirm quantity, date code and lead time on each quote and make no stock promise. Lines not on the shelf are quoted through our authorised Walsin channel. The ready-stock list shows the full dated snapshot.
How Venatech helps: what should a Chinese drive team send us?
The ceramic capacitors on your drive BOM. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, stating every field where the Walsin part differs from your original.
Paste a capacitor code into the cross-reference tool, or upload the whole BOM and request a quote through the site. The ready-stock snapshot is dated 9 November 2026. We serve Shenzhen, Dongguan, Suzhou and Shanghai from Hong Kong, with fast quotes and small lots. Walsin is the line we are authorised for; Stackpole and Viking are lines we supply.
The short version
China made 82,846 industrial robots in October 2026, up 26.0 percent, the National Bureau of Statistics reported on 16 November 2026. Every joint drive needs ceramic capacitors on its DC bus, and 48 V buses call for 100 V parts. Walsin lists 245 X7R capacitors at 100 V and 100 nF or more; 13 are on our shelf in Hong Kong, and 1206B105K101 meets a 1 µF, 1206 brief from stock today.
Send us the bus and snubber capacitors from your servo drive and we will return Walsin crosses with every difference stated. What peak does your bus reach when the arm brakes?
Related reading
- MLCC DC bias and voltage derating
- Flex cracking and board bend: why soft termination exists
- X7R MLCC capacitance ladder
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 19 November 2026.
Sources
Fetched 19 November 2026.
- National Bureau of Statistics of China, industrial production release for October 2026, 16 November 2026: https://www.stats.gov.cn/zwfwck/sjfb/202611/t20261116_1965842.html
- Walsin MLCC exports, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 19 November 2026; Walsin 01_General_Purpose.pdf, 11_Automotive_MT.pdf, 12_Soft_Term_Automotive_ST.pdf and 19_Soft_Term_SH.pdf datasheets; Venatech Hong Kong stock snapshot dated 9 November 2026.
Frequently asked questions
How many industrial robots did China produce in October 2026?
The National Bureau of Statistics reported 82,846 sets, up 26.0 percent year on year, and 874,141 sets from January to October, up 32.3 percent.
Why use a 100V MLCC on a 48 V servo drive?
The bus can ring and rise above 48 V during braking and switching, and a 100 V X7R part keeps more capacitance at 48 V than a lower-voltage part. Size the rating from your measured peak.
How many Walsin 100V X7R capacitors are 100 nF or more?
We counted 245, from 0603 to 2225. 82 reach 1 µF or more and 39 are in AEC-Q200 qualified series (MT and ST).
Which Walsin part crosses a 1 µF 100 V X7R 1206 capacitor?
1206B105K101 matches and is on our shelf in Hong Kong (snapshot 9 November 2026). MT31B105K101 and ST31B105K101 are AEC-Q200 matches, and SH31B105K101 is a soft-termination match.
Which 100V MLCC are in stock in Hong Kong for buyers in China?
Thirteen Walsin 100 V X7R lines were on our shelf in the snapshot dated 9 November 2026, including 1206B105K101 and 1210B105K101. We confirm availability on each quote.
Is Venatech an authorised Walsin distributor for buyers in China?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in China in small lots. Stackpole and Viking are lines we supply, not authorised lines.