Renault said on 17 November 2026 that it plans about 2,000 new production jobs in France, most of them on EV lines. More EV output means more automotive MLCC positions at 1 µF and above. Walsin Technology (Walsin) lists 70 AEC-Q200 capacitors in that range, and Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited wrote this for hardware engineers and component buyers at EV makers, tier-1 suppliers and EMS lines in France. The Renault plan is about people on assembly lines; it says nothing about capacitors or any supplier, and we draw no conclusion about any Renault bill of materials. What it does tell a supplier is that EV volumes in northern France are planned to grow, and that every board feeding those lines needs automotive MLCC with paperwork that survives a PPAP review. On 20 November 2026 we parsed Walsin’s MLCC export (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, 23,360 part numbers) and counted every AEC-Q200 part at 1 µF or more.
What did Renault announce for its French EV plants?
About 2,000 production roles by 2028. electrive reported on 17 November 2026 that Renault plans roughly 2,000 new production jobs in France over two years: 1,650 skilled assembly posts, 250 production-support roles and 100 graduate training places, while cutting up to 1,000 office roles through voluntary measures.
The same report splits the assembly posts by plant: 600 at Douai, 300 at Sandouville, 300 at Batilly and 250 at Maubeuge. Douai, which builds the electric Renault 5 and Scénic, moved from one to three shifts a day in about two years, electrive wrote, and talks with unions on the office cuts were due to start at the end of November. The report names no electronics supplier. For a buyer in France the useful reading is simple: planned EV output at these sites is rising, so the supplier boards that feed them, from on-board chargers to DC-DC converters and battery management, are worth a second-source review now rather than at the next shortage.
Why do 1 µF and larger capacitors matter on an EV board?
They do the bulk work. On a 12 V or 48 V rail in an EV, capacitors of 1 µF to 22 µF usually carry the input and output filtering of DC-DC stages, the bulk decoupling next to processors and gate drivers, and the hold-up on sensor supplies; they are also the positions where size, voltage and DC bias interact most.
A 100 nF decoupling capacitor can usually be swapped with little risk. A 10 µF X7R in 1210 is different. Its effective capacitance under DC bias depends on the case size, the dielectric and the rated voltage, and a cross that looks right on value alone can lose a large share of its capacitance at the working voltage. Walsin’s datasheet for each series gives the curves; our note on MLCC DC bias and voltage derating explains how to read them. On an automotive board the qualification status matters as much as the electrical fit: the part must be in an AEC-Q200 family that your customer’s approval process recognises.
How many Walsin automotive MLCC reach 1 µF or more?
Seventy. We counted 70 distinct Walsin AEC-Q200 part numbers at 1 µF or more in the export: 38 in the MT series and 32 in the soft-termination ST series, all X7R, from 0603 to 2220 and from 10 V to 100 V.
| Cut of the 70 AEC-Q200 parts at 1 µF or more | Part numbers |
|---|---|
| 1210 case | 30 |
| 1206 case | 26 |
| 0805 case | 10 |
| 0603 case | 3 |
| 2220 case | 1 |
| Rated 50 V | 26 |
| Rated 100 V | 12 |
| Rated 16 V or 25 V | 28 |
| Total, MT plus ST | 70 |
The full AEC-Q200 range we measured holds 2,283 MLCC part numbers, so the 1 µF-and-up slice is small, and it sits in the larger cases, as physics predicts. Values run from 1 µF to 22 µF; the 22 µF parts are all 1210 soft-termination ST at 16 V or 25 V. Check the datasheet for the MT and ST series before approval: the temperature range, the qualification statement and the DC bias curves come from Walsin’s datasheet, not from a part number. The MLCC range page links each series.
Which shelf capacitors have an exact AEC-Q200 twin?
Twelve of 23. We checked the 23 general-purpose X7R MLCC lines of 1 µF or more on our shelf in Hong Kong (snapshot 9 November 2026) against the AEC-Q200 range: 12 have an exact MT or ST twin at the same case, value, voltage and tolerance.
| Shelf part (general purpose) | Case | Value | Voltage | AEC-Q200 twin | Match / mismatch |
|---|---|---|---|---|---|
0603B105K160 |
0603 | 1 µF | 16 V | MT18B105K160 |
Match |
0805B105K100 |
0805 | 1 µF | 10 V | MT21B105K100 |
Match |
1206B105K500 |
1206 | 1 µF | 50 V | MT31B105K500 |
Match |
1206B105K101 |
1206 | 1 µF | 100 V | ST31B105K101 |
Match, soft termination |
1206B475K500 |
1206 | 4.7 µF | 50 V | ST31B475K500 |
Match, soft termination only |
1210B475K500 |
1210 | 4.7 µF | 50 V | MT32B475K500 |
Match |
1210B106K250 |
1210 | 10 µF | 25 V | MT32B106K250 |
Match |
1206B225K250 |
1206 | 2.2 µF | 25 V | MT31B225K500 |
Mismatch on voltage: 50 V, check DC bias |
0805B225K250 |
0805 | 2.2 µF | 25 V | MT31B225K500 |
Mismatch on case: 1206 footprint |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
The match column assumes the brief is the shelf part’s case, value, voltage and ±10 % tolerance. A higher-voltage twin often holds more capacitance under bias, which can be welcome, but it is still a change your quality team must approve. Put your incumbent part next to each row and compare both datasheets before you raise the change.
What should a buyer in France check before switching to an automotive MLCC?
Three documents and one measurement. Before switching a 1 µF-plus position to an AEC-Q200 part, a buyer in France should hold the AEC-Q200 qualification statement for the series, the datasheet DC bias curve, and the change-notification route, and should measure effective capacitance at the working voltage.
The qualification paperwork is the part most often missed. Our note on what AEC-Q200 actually certifies sets out what the stress tests cover, and the qualification report to ask for lists the documents a PPAP reviewer expects. Walsin also offers an automotive family without AEC-Q200 certification, the MG series; we left it out of every count above, and MT vs MG explains the split. None of this is legal or contractual advice: approval rules sit in your customer agreements, so confirm them with your quality and compliance teams.
How Venatech helps
A checked cross, part by part. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so an EV capacitor list returns Walsin candidates with series, case, voltage and AEC-Q200 status stated.
Paste your capacitor part numbers into the cross-reference tool, or upload the whole board BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong; the MT and ST parts are supplied to order through our authorised Walsin channel. We are Hong Kong-based, serve buyers in France in small lots, and confirm availability, date code and lead time on every quote. Walsin is our authorised line; Stackpole and Viking are lines we supply.
The short version
Renault said on 17 November 2026 that it plans about 2,000 production jobs in France, 1,650 of them skilled assembly posts at Douai, Sandouville, Batilly and Maubeuge. More EV output means more automotive MLCC positions at 1 µF and above. Walsin lists 70 AEC-Q200 parts in that range, and 12 of the 23 X7R lines of that size on our shelf in Hong Kong have an exact AEC-Q200 twin.
Send us the bulk capacitor lines from your EV board, and we will return Walsin AEC-Q200 crosses with every difference stated. Which 10 µF position on your board has only one approved source?
Related reading
- AEC-Q200 MLCC: MT vs MG series
- What AEC-Q200 actually certifies
- MLCC DC bias and voltage derating
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 20 November 2026
Sources
Fetched 20 November 2026.
- electrive, “Renault to create 2,000 new jobs in EV production”, 17 November 2026: https://www.electrive.com/2026/11/17/renault-to-create-2000-new-jobs-in-ev-production/
- Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 20 November 2026; Venatech ready-stock snapshot dated 9 November 2026.
Frequently asked questions
How many production jobs did Renault say it plans in France?
electrive reported on 17 November 2026 that Renault plans about 2,000 production roles over two years, including 1,650 skilled assembly posts split between Douai, Sandouville, Batilly and Maubeuge.
Does the Renault plan say anything about capacitors?
No. It concerns assembly and support jobs. It names no electronics supplier, and we draw no conclusion about any Renault bill of materials.
How many Walsin automotive MLCC are rated 1 µF or more?
We counted 70 AEC-Q200 part numbers at 1 µF or more: 38 in the MT series and 32 in the soft-termination ST series, all X7R, from 0603 to 2220.
Can I replace a general-purpose 1 µF MLCC with an AEC-Q200 part in France?
Often by part number: 12 of the 23 X7R lines of 1 µF or more on our shelf in Hong Kong have an exact MT or ST twin. The change still goes through your own qualification and customer approval.
Why check DC bias when crossing a 10 µF automotive MLCC?
Because effective capacitance falls with applied DC voltage, and the fall depends on case, dielectric and rated voltage. Compare the datasheet curves of both parts at your working voltage.
Is Venatech an authorised Walsin distributor for buyers in France?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in France in small lots. Stackpole and Viking are lines we supply, not authorised lines.