Taiwan’s BSMI mandatory inspection has covered EV chargers under 30 kW, power conversion systems under 20 kW and home lithium storage under 20 kWh since July 2026. For the surge stage on those boards, Walsin Technology (Walsin) lists 68 MOV varistors rated 250 to 320 Vac. Venatech is the authorised Walsin distributor in Hong Kong.
This post is for the hardware, safety-compliance and purchasing engineers at charger, inverter, storage and battery-pack makers in Taoyuan, Hsinchu, Taichung, Tainan and Kaohsiung, and the EMS lines that build their boards. Venatech Limited is the authorised Walsin distributor in Hong Kong; Walsin is the Taiwanese maker of MLCC, chip resistors, varistors and other passive components. On 20 November 2026 we re-read Walsin’s varistor export (379 distinct MOV part numbers) and counted the parts that sit on the working-voltage rungs a 220 V single-phase or phase-to-neutral input usually calls for. This is perspective for engineers and buyers, not legal advice: confirm how the rules apply to your product with your compliance team.
What does the BSMI mandatory inspection now cover in Taiwan?
Three new families of energy products. Taiwan News reported on 23 June 2026 that the Ministry of Economic Affairs had announced inspections starting in July for EV charging equipment under 30 kW, power conversion systems under 20 kW and stationary lithium storage systems under 20 kWh, run by the Bureau of Standards, Metrology and Inspection (BSMI).
The same report adds seven categories of rechargeable household appliances and says the checks focus on insulation, electromagnetic compatibility and flame resistance. UL’s Global Market Access Regulatory Newsletter for the third quarter of 2026, published on 7 October 2026, lists the change as announced on 23 June 2026 and effective on 1 July 2026, and adds lithium battery packs for storage between 1 kWh and 20 kWh to the scope. Which inspection scheme, standard and transition date applies to a given model is for your certification body and compliance team to confirm; we make no claim about any one product.
Why does the BSMI rule matter to EV charger and storage makers in Taiwan?
Because a design now has to pass before it can be sold at home. From 1 July 2026, per UL’s 7 October 2026 newsletter, chargers up to 30 kW, power conversion systems up to 20 kW and storage up to 20 kWh need BSMI inspection before entering the Taiwan market, so a late part change can mean a late retest.
That moves work to the front of a programme. Insulation distances, EMC filtering and flame ratings are fixed at layout, and a varistor, X or Y capacitor swapped after a test report may need to be checked again, depending on how your certification body treats the change. For a buyer, the practical step is to lock the protection and filter parts early, record the manufacturer part number and its datasheet revision in the technical file, and qualify a second source before submission. Our guide on building a BOM that survives a shortage covers the second-source side.
Which parts of a charger or storage board does the inspection touch?
Mainly the AC front end and its filter. Of the three checks Taiwan News named on 23 June 2026, two, insulation and electromagnetic compatibility, fall squarely on the input stage: the MOV varistor across the line, the X and Y capacitors of the EMI filter, and the creepage around them.
On a typical AC wallbox or home storage inverter, the input runs fuse, MOV, X capacitor, common-mode choke, Y capacitors to earth, then the rectifier. The MOV clamps line surges; the X and Y capacitors and the choke carry most of the conducted-emissions margin. Flame resistance touches the varistor too, which is why some designs add a thermal fuse beside it. Our explainers on how to choose an MOV varistor and X1 Y1 versus X1 Y2 safety capacitors walk through both stages. Check the datasheet. Clamping voltage, energy rating and safety approvals sit in Walsin’s datasheet and certificates, not in every column of the export; read the varistor datasheet for each part before the technical file is closed.
How many Walsin MOV varistors fit a 220 V charger or inverter input?
68 part numbers on four working-voltage rungs. We counted 68 distinct Walsin MOV part numbers in the export with a maximum working voltage of 250, 275, 300 or 320 Vac, 17 on each rung, in disc sizes from 5 mm to 53 mm and with peak currents from 400 A to 80,000 A.
| Walsin series | Disc sizes | Parts at 250 to 320 Vac | Peak current range in the export |
|---|---|---|---|
| Standard (D series) | 5, 7, 10, 14, 20, 25 mm | 24 | 400 A to 18,000 A |
| High Energy (E series) | 5, 7, 18 mm | 12 | 800 A to 9,000 A |
| Super High Energy (V series) | 10, 14, 20 mm | 12 | 4,000 A to 13,000 A |
| Industrial | 32, 34 mm square, 40, 53 mm | 20 | 30,000 A to 80,000 A |
We have not seen the 220 V band counted this way elsewhere. As at 20 November 2026, Walsin’s export lists 379 varistors in these four families, so the 250 to 320 Vac band is about one part in six. The varistor voltage on these rungs runs 390, 430, 470 and 510 Vdc. A 14 mm disc gives 4,500 A in the D series and 8,000 A in the V series at the same working voltage, which is the usual way to buy surge headroom without a bigger footprint. Our note on D, E, V and Industrial series selection explains the trade.
Which Walsin varistors fit typical Taiwanese charger and PCS briefs?
Five of six typical briefs fit directly. We set six common surge briefs for 220 V charger, PCS and storage inputs against the export on 20 November 2026: five matched a Walsin part on working voltage, disc size and peak current, and one, a 7 mm part at 2,000 A, did not.
| Typical brief | Walsin part | Series | Disc | Working voltage | Peak current | Match / mismatch with the brief |
|---|---|---|---|---|---|---|
| 7 kW AC wallbox input, 275 Vac, 14 mm, at least 4,500 A | SR431K14D |
Standard (D) | 14 mm | 275 Vac | 4,500 A | Match |
| Same footprint, at least 8,000 A | SR431K14E |
Super High Energy (V) | 14 mm | 275 Vac | 8,000 A | Match |
| Hybrid inverter AC port, 300 Vac, 20 mm, at least 10,000 A | SR471K20E |
Super High Energy (V) | 20 mm | 300 Vac | 13,000 A | Match |
| PCS grid port, 320 Vac, block package, 40,000 A | SR511K34R |
Industrial | 34 mm square | 320 Vac | 40,000 A | Match |
| Home storage auxiliary supply, 250 Vac, 14 mm | SR391K14D |
Standard (D) | 14 mm | 250 Vac | 4,500 A | Match |
| Compact charger, 275 Vac, 7 mm, at least 2,000 A | SR431K07D |
Standard (D) | 7 mm | 275 Vac | 1,200 A | Mismatch: 1,200 A; the 10 mm SR431K10D gives 2,500 A |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
A match here means a match on Walsin’s published fields as we read them from the export. Set the working voltage against your worst-case line voltage, check clamping voltage and energy on Walsin’s datasheet, and test the part before the BSMI sample goes in. As at 9 November 2026, none of these varistors was on our Hong Kong shelf; request a quote and we source them through our authorised Walsin channel, with availability, date code and lead time confirmed on each quote.
How Venatech helps
How Venatech helps: authorised Walsin supply and quick quotes from Hong Kong for Taiwanese charger and storage programmes. Venatech Limited is the authorised Walsin distributor in Hong Kong; VenaMatch decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, and our re-count finds 68 Walsin MOV varistors rated 250 to 320 Vac.
Paste a Bourns, Littelfuse, TDK or other varistor number into the cross-reference tool, upload the protection and filter lines as a BOM, check the ready-stock list (snapshot dated 9 November 2026) and browse the MOV range, then request a quote through the site. We are Hong Kong-based, quote small lots for samples and pilot builds, and make no price, lead-time or stock promise until the quote is issued.
The short version
Taiwan News reported on 23 June 2026 that BSMI inspection would cover EV chargers under 30 kW, power conversion systems under 20 kW and home lithium storage under 20 kWh from July, with insulation, EMC and flame resistance in focus. Walsin’s export holds 68 MOV varistors rated 250 to 320 Vac for the surge stage of those inputs, and five of our six typical briefs matched one directly.
Send us your charger or PCS protection lines before the test sample is built, and we will return the Walsin match with every field difference marked.
Related reading
- How to choose an MOV varistor
- MOV varistor series selection: D, E, V and Industrial
- X1 Y1 versus X1 Y2 safety capacitors
- Cross-reference tool, BOM upload and ready-stock list
Last reviewed: 20 November 2026
Sources
Fetched 20 November 2026.
- Taiwan News, “Taiwan expands product inspections to EV chargers, storage systems”, 23 June 2026: https://www.taiwannews.com.tw/en/news/6387853
- UL Solutions, “Global Market Access Regulatory Newsletter Q3 2026”, 7 October 2026: https://www.ul.com/news/global-market-access-regulatory-newsletter-q3-2026
- Walsin MOV varistor export, re-measured 20 November 2026 (379 distinct part numbers); Venatech ready-stock snapshot dated 9 November 2026.
Frequently asked questions
<!– wp:rank-math/faq-block {"questions":[{"id":"faq-question-01","title":"Does the BSMI mandatory inspection cover EV chargers in Taiwan?","content":"Yes. Taiwan News reported on 23 June 2026 that inspection from July covers EV charging equipment under 30 kW, along with power conversion systems under 20 kW and stationary lithium storage under 20 kWh. Confirm how it applies to your model with your compliance team.","visible":true},{"id":"faq-question-02","title":"Is Venatech a Walsin varistor supplier for Taiwanese charger makers?","content":"Yes. Venatech Limited is the authorised Walsin distributor in Hong Kong and supplies Walsin MOV varistors, MLCC, resistors and safety capacitors to makers in Taiwan. Walsin is the line we are authorised for.","visible":true},{"id":"faq-question-03","title":"How many Walsin varistors suit a 220 V input?","content":"We counted 68 Walsin MOV part numbers rated 250, 275, 300 or 320 Vac in the export, 17 on each rung, from 5 mm to 53 mm and from 400 A to 80,000 A.","visible":true},{"id":"faq-question-04","title":"Which Walsin MOV fits a 7 kW AC wallbox?","content":"For a 275 Vac, 14 mm input,SR431K14D gives 4,500 A and SR431K14E gives 8,000 A in the same disc size. Test the part in your design and check the datasheet before the sample is submitted.”,”visible”:true},{“id”:”faq-question-05″,”title”:”Will changing a varistor affect my BSMI test report?”,”content”:”It can. Whether a part change needs re-testing depends on your certification body and the tested design; ask them and your compliance team before you change a protection or filter part.”,”visible”:true},{“id”:”faq-question-06″,”title”:”Are these varistors in stock in Hong Kong?”,”content”:”None was on our shelf in the snapshot dated 9 November 2026. Request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote.”,”visible”:true}],”listStyle”:””,”titleWrapper”:”h3″,”titleCssClasses”:””,”contentCssClasses”:””,”sizeSlug”:””} –>
Does the BSMI mandatory inspection cover EV chargers in Taiwan?
Yes. Taiwan News reported on 23 June 2026 that inspection from July covers EV charging equipment under 30 kW, along with power conversion systems under 20 kW and stationary lithium storage under 20 kWh. Confirm how it applies to your model with your compliance team.
Is Venatech a Walsin varistor supplier for Taiwanese charger makers?
Yes. Venatech Limited is the authorised Walsin distributor in Hong Kong and supplies Walsin MOV varistors, MLCC, resistors and safety capacitors to makers in Taiwan. Walsin is the line we are authorised for.
How many Walsin varistors suit a 220 V input?
We counted 68 Walsin MOV part numbers rated 250, 275, 300 or 320 Vac in the export, 17 on each rung, from 5 mm to 53 mm and from 400 A to 80,000 A.
Which Walsin MOV fits a 7 kW AC wallbox?
For a 275 Vac, 14 mm input, SR431K14D gives 4,500 A and SR431K14E gives 8,000 A in the same disc size. Test the part in your design and check the datasheet before the sample is submitted.
Will changing a varistor affect my BSMI test report?
It can. Whether a part change needs re-testing depends on your certification body and the tested design; ask them and your compliance team before you change a protection or filter part.
Are these varistors in stock in Hong Kong?
None was on our shelf in the snapshot dated 9 November 2026. Request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote.