The EU’s proposed Industrial Accelerator Act would add Made in EU and EU-content conditions for EVs, batteries and their components, with a committee vote set for 1 December 2026. For Hungary’s EV and battery plants, Walsin Technology (Walsin) lists 2,167 AEC-Q200 MT-series MLCC. Venatech is the authorised Walsin distributor in Hong Kong.
Venatech Limited wrote this for purchasing, supplier-quality and hardware engineers at EV, battery, inverter and automotive-electronics plants in Hungary, and at the EMS lines that build their boards. The Industrial Accelerator Act is still a proposal, and this post is perspective rather than legal or regulatory advice: confirm with your compliance team how any final text applies to your products, contracts and funding. On 20 November 2026 we re-measured Walsin’s MLCC export (Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, 23,360 part numbers) for the automotive series a BMS or inverter board would draw on.
What is the Industrial Accelerator Act?
A Commission proposal of 4 March 2026 to favour EU-made goods in strategic sectors. Mayer Brown wrote on 9 March 2026 that the Commission proposed the Industrial Accelerator Act, COM(2026) 100, on 4 March 2026, with origin requirements for net-zero technologies such as batteries and solar PV where public funds are involved, and origin conditions for vehicles and selected components.
Mayer Brown also described a foreign-investment regime for investments above 100 million euros in batteries, EVs, solar PV and critical raw materials, with a notification trigger at 30 percent ownership and approval tied to at least four of six conditions, one of which is sourcing at least 30 percent of inputs from the EU. The Next Web reported on 14 August 2026 that, for electric, plug-in hybrid and fuel-cell vehicles, the proposal sets EU assembly requirements, minimum EU content thresholds for components and battery sourcing rules, applying six months after entry into force. The European Parliament’s research service put the wider goal, on 21 May 2026, as manufacturing at 20 percent of EU GDP by 2035, up from 14.3 percent in 2024. The text is not settled: MLex reported on 11 November 2026 that the Parliament committee vote is scheduled for 1 December 2026 and that lawmakers had yet to reach compromises on the main elements.
Why does the Industrial Accelerator Act matter to EV and battery plants in Hungary?
Because Hungary’s vehicle and battery output is climbing fast. Hungary’s statistics office, KSH, reported on 13 November 2026 that industrial production grew 8.2 percent year on year in September 2026, that motor vehicle manufacturing rose 62 percent, and that production of batteries and accumulators rose 15.1 percent.
Those are exactly the product groups the proposal names: vehicles, batteries and the components that go into them. If the final act ties public procurement, purchase incentives or investment approval to EU content, the plants that sell into those programmes will ask their suppliers for origin data, and the suppliers will ask their component distributors. We make no claim about any company’s sourcing or its exposure to the proposal. Our note on AEC-Q200 MLCC: MT versus MG series covers the qualification side of the same boards.
What should an electronics buyer in Hungary document now?
Origin, qualification and second source, line by line. For each passive line on an EV or battery board, record the maker, the maker’s stated country of origin on the certificate of conformance, the AEC-Q200 status and a qualified second source; that file answers an origin question quickly, whatever the final thresholds turn out to be.
First, origin is the maker’s statement, not the distributor’s: ask for it on the quote and the certificate, and keep the date code with it. Second, an origin rule for a whole component (an inverter, a battery pack) does not tell you how a single capacitor is counted; how content is calculated is a question for your compliance team once the text is final. Third, an AEC-Q200 part on a second-source list is worth more than an unqualified one, because a later switch for origin reasons will not then reopen qualification. Our guide to second-sourcing passive components without redesigning the board sets out the fields that must match.
How many AEC-Q200 Walsin MLCC fit a BMS or inverter board?
2,167 in the MT series, plus 116 automotive soft-termination parts. We parsed all 23,360 rows of Walsin’s MLCC export and counted 2,167 distinct part numbers in the Automotive Caps Qualified to AEC-Q200 (MT series): 1,284 C0G/NP0, 880 X7R and 3 X8G, from 0201 to 1210.
| Walsin automotive series | 0201 | 0402 | 0603 | 0805 | 1206 | 1210 | Other | Total part numbers |
|---|---|---|---|---|---|---|---|---|
| AEC-Q200 MT series | 204 | 485 | 581 | 508 | 311 | 78 | 0 | 2,167 |
| AEC-Q200 soft termination (ST series) | 0 | 1 | 34 | 24 | 27 | 22 | 8 | 116 |
The ST series adds soft (flexible) termination for boards that flex in a pack or a housing, from 0402 to 2220; Walsin’s datasheet for each series sets the test conditions behind the AEC-Q200 claim, so read it as at 20 November 2026 alongside the export. Walsin’s MG series (783 automotive parts without AEC-Q200 certification) is kept separate on purpose. We have not seen this split counted anywhere else. Browse the full MLCC range by series, and keep the datasheet revision with your qualification file.
Which Walsin automotive MLCC match a typical Hungarian BMS brief?
Five of seven briefs match on the first pick. We set seven common BMS and inverter capacitor briefs against the MT and ST series in the export: five matched a Walsin part on every listed field, and two did not, both on voltage in the smaller case.
| BMS or inverter brief | Walsin part | Case | Capacitance | Dielectric | Rated V | Tolerance | Match / mismatch with the brief |
|---|---|---|---|---|---|---|---|
| 100 nF, 0603, X7R, 50 V, AEC-Q200 | MT18B104K500 |
0603 | 100 nF | X7R | 50 V | ±10% | Match |
| 100 nF, 0603, X7R, 100 V, AEC-Q200 | MT18B104K500 |
0603 | 100 nF | X7R | 50 V | ±10% | Mismatch: 50 V; the MT series stops at 50 V for this value in 0603 |
| 100 nF, 0603, X7R, 100 V, AEC-Q200 | ST18B104K101 |
0603 | 100 nF | X7R | 100 V | ±10% | Match, with soft termination |
| 1 µF, 0805, X7R, 100 V, AEC-Q200 | MT21B105K500 |
0805 | 1 µF | X7R | 50 V | ±10% | Mismatch: 50 V; move to 1206 |
| 1 µF, 1206, X7R, 100 V, AEC-Q200 | MT31B105K101 |
1206 | 1 µF | X7R | 100 V | ±10% | Match |
| 1 nF, 0402, C0G, 50 V, AEC-Q200 | MT15N102J500 |
0402 | 1 nF | C0G/NP0 | 50 V | ±5% | Match |
| 100 nF, 1206, X7R, 100 V, flex-prone board | ST31B104K101 |
1206 | 100 nF | X7R | 100 V | ±10% | Match |
Have part numbers to quote? Click any Walsin part number in the table to open its page and add it to your RFQ, or upload your BOM for a quote, or cross your current part in VenaMatch. E-mail sales@venatech.com.hk or call (852) 2628 4777. We confirm availability, date code and lead time on each quote.
The MT and ST parts above are to order: request a quote and we source them through our authorised Walsin channel, confirming availability, date code and lead time on each quote. A match here is a match on Walsin’s published fields as we read them from the export; qualify any new part in your own application before production.
Check the datasheet. The export lists value, voltage, tolerance and case, not DC-bias derating or the country of manufacture. Take both from Walsin’s MT and ST datasheets and from the certificate of conformance that comes with the parts. Our explainer on MLCC DC bias and voltage derating shows why a 100 V part on a 48 V rail is the usual choice.
How Venatech helps
How Venatech helps is a documented automotive passive list before the origin questions arrive. Venatech Limited, Walsin’s authorised distributor in Hong Kong, runs VenaMatch, which decodes part numbers from 18 manufacturers and crosses 800,000+ parts to Walsin, so an incumbent automotive capacitor returns MT or ST candidates with every field difference stated.
Paste your BMS and inverter capacitors into the cross-reference tool, or upload the board’s BOM and request a quote through the site. The ready-stock snapshot, dated 9 November 2026, lists what is on our shelf in Hong Kong. We are Hong Kong-based, quote small lots for plants in Debrecen, Szeged, Kecskemet and Gyor, and confirm availability, date code, origin statement and lead time on every quote. Walsin is our authorised line. For anything about the Industrial Accelerator Act, public procurement or investment approval, confirm with your compliance team.
The short version
The Industrial Accelerator Act, proposed on 4 March 2026, would add Made in EU and EU-content conditions for vehicles, batteries and their components; the Parliament committee vote is set for 1 December 2026 and the text may still change. Hungary’s motor vehicle output rose 62 percent and battery output 15.1 percent in September 2026, according to KSH. Build the origin and qualification file now: Walsin lists 2,167 AEC-Q200 MT-series MLCC and 116 ST-series soft-termination parts, and five of seven common BMS briefs matched on every listed field.
Send us the capacitor lines of your BMS or inverter board, and we will return MT and ST candidates with voltage and case stated. Which line on your board would you most like a qualified second source for?
Related reading
- AEC-Q200 MLCC: MT versus MG series
- Second-sourcing passive components without redesigning the board
- MLCC DC bias and voltage derating
- Cross-reference tool, BOM upload and ready-stock snapshot
Last reviewed: 20 November 2026
Sources
Fetched 20 November 2026.
- Mayer Brown, “European Commission proposes Industrial Accelerator Act”, 9 March 2026: https://www.mayerbrown.com/en/insights/publications/2026/03/european-commission-proposes-industrial-accelerator-act
- The Next Web, “Europe’s ‘Made in EU’ rules start at 5%, and they do not mention software”, 14 August 2026: https://thenextweb.com/news/made-in-eu-industrial-accelerator-act-hardware-sovereignty
- European Parliament Think Tank, “Industrial Accelerator Act”, 21 May 2026: https://epthinktank.eu/2026/05/21/industrial-accelerator-act-eu-legislation-in-progress/
- MLex, “EU Industrial Accelerator Act still dividing lawmakers ahead of December vote”, 11 November 2026: https://www.mlex.com/mlex/articles/2548982
- KSH (Hungarian Central Statistical Office), “Industry, September 2026 (second estimate)”, 13 November 2026: https://www.ksh.hu/en/first-releases/ipa/eipa2609.html
- Walsin MLCC export, Venatech_MLCC_Upload_01.xlsx to Venatech_MLCC_Upload_08.xlsx, re-measured 20 November 2026.
Frequently asked questions
<!– wp:rank-math/faq-block {"questions":[{"id":"faq-question-01","title":"Is the Industrial Accelerator Act already law?","content":"No. The Commission proposed it on 4 March 2026 and it is in the ordinary legislative procedure; MLex reported a Parliament committee vote scheduled for 1 December 2026. Confirm the final text and dates with your compliance team.","visible":true},{"id":"faq-question-02","title":"Does the Industrial Accelerator Act cover EV components made in Hungary?","content":"The Next Web reported that the proposal sets EU assembly requirements, minimum EU content thresholds for components and battery sourcing rules for electric, plug-in hybrid and fuel-cell vehicles. How a given component or capacitor is counted depends on the final text; ask your compliance team.","visible":true},{"id":"faq-question-03","title":"What origin data should I ask my passive component supplier for?","content":"Ask for the maker's stated country of origin on the certificate of conformance, the date code and the AEC-Q200 status for each line. We confirm these on every quote.","visible":true},{"id":"faq-question-04","title":"How many AEC-Q200 Walsin MLCC are there?","content":"We counted 2,167 Walsin MT-series AEC-Q200 MLCC in the export, 1,284 C0G/NP0, 880 X7R and 3 X8G, plus 116 ST-series automotive soft-termination parts.","visible":true},{"id":"faq-question-05","title":"Which Walsin capacitor fits 100 nF at 100 V in 0603 for a BMS?","content":"ST18B104K101, an AEC-Q200 ST-series soft-termination X7R part at 100 V, matches that brief; the MT series stops at 50 V for 100 nF in 0603.”,”visible”:true},{“id”:”faq-question-06″,”title”:”Is Venatech an authorised Walsin distributor for buyers in Hungary?”,”content”:”Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Hungary in small lots. Walsin is the line we are authorised for; other brands we source on request.”,”visible”:true}],”listStyle”:””,”titleWrapper”:”h3″,”titleCssClasses”:””,”contentCssClasses”:””,”sizeSlug”:””} –>
Is the Industrial Accelerator Act already law?
No. The Commission proposed it on 4 March 2026 and it is in the ordinary legislative procedure; MLex reported a Parliament committee vote scheduled for 1 December 2026. Confirm the final text and dates with your compliance team.
Does the Industrial Accelerator Act cover EV components made in Hungary?
The Next Web reported that the proposal sets EU assembly requirements, minimum EU content thresholds for components and battery sourcing rules for electric, plug-in hybrid and fuel-cell vehicles. How a given component or capacitor is counted depends on the final text; ask your compliance team.
What origin data should I ask my passive component supplier for?
Ask for the maker’s stated country of origin on the certificate of conformance, the date code and the AEC-Q200 status for each line. We confirm these on every quote.
How many AEC-Q200 Walsin MLCC are there?
We counted 2,167 Walsin MT-series AEC-Q200 MLCC in the export, 1,284 C0G/NP0, 880 X7R and 3 X8G, plus 116 ST-series automotive soft-termination parts.
Which Walsin capacitor fits 100 nF at 100 V in 0603 for a BMS?
ST18B104K101, an AEC-Q200 ST-series soft-termination X7R part at 100 V, matches that brief; the MT series stops at 50 V for 100 nF in 0603.
Is Venatech an authorised Walsin distributor for buyers in Hungary?
Venatech Limited is an authorised Walsin distributor in Hong Kong and serves buyers in Hungary in small lots. Walsin is the line we are authorised for; other brands we source on request.